Accueil
Catégories
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
From the formulation to the finished product / Christina Hirt in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 6 (06/2012)
[article]
Titre : From the formulation to the finished product Type de document : texte imprimé Auteurs : Christina Hirt, Auteur ; Karsten Kretschmer, Auteur ; Peter Heidemeyer, Auteur ; Martin Bastian, Auteur Année de publication : 2012 Article en page(s) : p. 27-30 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Bois
Chlorure de polyvinyle
Composites à fibres végétales
Formulation (Génie chimique)
MélangeIndex. décimale : 668.4 Plastiques, vinyles Résumé : Wood Plastic Composites (WPC) - After a few selective modifications, the production of PVC-based WPC dryblends in a heating-cooling mixer and the subsequent processing to form profiles can be copied from PVC processing. Attention has to be paid, however, to the influences of formulation, process technology and process parameters during the production of the mixture. Note de contenu : - The WPC formulation
- Blending in the heating-cooling mixer
- The investigations
- Properties of the WPC dryblends and the profiles producedPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=16247
in KUNSTSTOFFE INTERNATIONAL > Vol. 102, N° 6 (06/2012) . - p. 27-30[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 13986 - Périodique Bibliothèque principale Documentaires Disponible Gaseous efficiency of methane fermentation of chromium-free tannery wastes / M. Urbaniak in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 91, N° 2 (03-04/2007)
[article]
Titre : Gaseous efficiency of methane fermentation of chromium-free tannery wastes Type de document : texte imprimé Auteurs : M. Urbaniak, Auteur Année de publication : 2007 Article en page(s) : p. 59-62 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Biodégradation
Boues d'épuration
Cuirs et peaux -- Industrie
Fermentation
Mélange
Méthane
Tannage -- DéchetsIndex. décimale : 675.2 Préparation du cuir naturel. Tannage Résumé : The aim of the research was the neutralisation of particularly environmentally nasty chromium-free tannery wastes by their use for gas making. Methane fermentation of wastes with the addition of excessive sludge from municipal sewage has been carried out. It has been found that, more gas with a higher methane content is obtained from the fermentation of tannery wastes than from the fermentation of municipal sewage sludge. Gaseous efficiency of the fermentation of tannery wastes varies between 950 – 1120dm3 per 1kg of decomposed organic dry substance. Gas obtained from fermentation of these tannery wastes may contain over 70% of methane.
The biodegradability of chromium-free tannery wastes in the methane fermentation process may additionally be increased by means of thermal treatment applied before fermentation.Note de contenu : - EXPERIMENTAL PROCEDURES : Analytical tests - Materials - Procedures
- DISCUSSION OF RESULTS : Possible industrial benefits
- Table 1 : Materials prepared for fermentation and post-fermentation mixtures obtained after 10 days fermentationEn ligne : https://drive.google.com/drive/folders/1s-_z15S5jTWCU6O-yOgZT8wOxOwbzS-G?usp=sha [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=39034
in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC) > Vol. 91, N° 2 (03-04/2007) . - p. 59-62[article]Incorporation de matières plastiques recyclées : comment obtenir la certification / Laetitia Goldszmidt in PLASTIQUES & CAOUTCHOUCS MAGAZINE, N° 988 (03-04/2023)
[article]
Titre : Incorporation de matières plastiques recyclées : comment obtenir la certification Type de document : texte imprimé Auteurs : Laetitia Goldszmidt, Auteur Année de publication : 2023 Article en page(s) : p. 56-59 Langues : Français (fre) Catégories : Certification
Économie circulaireL'économie circulaire est une expression générique désignant un concept économique qui s'inscrit dans le cadre du développement durable et s'inspirant notamment des notions d'économie verte, d’économie de l'usage ou de l'économie de la fonctionnalité, de l'économie de la performance et de l'écologie industrielle (laquelle veut que le déchet d'une industrie soit recyclé en matière première d'une autre industrie ou de la même).
Son objectif est de produire des biens et services tout en limitant fortement la consommation et le gaspillage des matières premières, et des sources d'énergies non renouvelables ;
Selon la fondation Ellen Mac Arthur (créée pour promouvoir l'économie circulaire1), il s'agit d'une économie industrielle qui est, à dessein ou par intention, réparatrice et dans laquelle les flux de matières sont de deux types bien séparés ; les nutriments biologiques, destinés à ré-entrer dans la biosphère en toute sécurité, et des intrants techniques ("technical nutrients"), conçus pour être recyclés en restant à haut niveau de qualité, sans entrer dans la biosphère
Matières plastiques -- Recyclage
Mélange
Produits et matériaux recyclésIndex. décimale : 668.4 Plastiques, vinyles Résumé : Economie circulaire : Cinq plasturgiste ont déjà obtenu la nouvelle Certification Incorporation de matières plastiques recyclées développée par le LNE en partenariat avec le Centre technique IPC. Comment les rejoindre ? Mode d'emploi. Note de contenu : - Deux parties aux objectifs distincts
- Les principales étapes
- Focus sur la partie 1
- Focus sur la partie 2
- Quel lien avec le label More ?
- Informations contenues dans les certificats
- Encadré 1 : les normes et texte de référence
- Encadré 2 : Petit lexique pour appréhender le référentielEn ligne : https://drive.google.com/file/d/1zOAYjiT2mjMQYCTQUX6LlYQsdu9g_6a9/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=39225
in PLASTIQUES & CAOUTCHOUCS MAGAZINE > N° 988 (03-04/2023) . - p. 56-59[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 24021 - Périodique Bibliothèque principale Documentaires Disponible Industry 4.0 materials handling components and innovative LFT pellets / Kirsten Hennige in JEC COMPOSITES MAGAZINE, N° 117 (11-12/2017)
[article]
Titre : Industry 4.0 materials handling components and innovative LFT pellets Type de document : texte imprimé Auteurs : Kirsten Hennige, Auteur Année de publication : 2017 Article en page(s) : p. 35-36 Langues : Anglais (eng) Catégories : Composites à fibres
Fibres longues
Granulés plastiques
Industrie 4.0Le concept d’Industrie 4.0 correspond à une nouvelle façon d’organiser les moyens de production : l’objectif est la mise en place d’usines dites "intelligentes" ("smart factories") capables d’une plus grande adaptabilité dans la production et d’une allocation plus efficace des ressources, ouvrant ainsi la voie à une nouvelle révolution industrielle. Ses bases technologiques sont l'Internet des objets et les systèmes cyber-physiques.
Mélange
Procédés de fabricationIndex. décimale : 668.4 Plastiques, vinyles Résumé : The manufacturing industry has been improving its meterials handling components, making them more modular and giving them Industry 4.0 capabilities. ProTec recently presneted its own components, demonstrating their ability to interact with one another. The performance of its pultrusion lines has also been demonstrated with its innovative long fibre reinforced thermoplastic pellets. Note de contenu : - PLC brings industry 4.0 capabilities to dryers and dosing units
- Drying and dosing with quality control and high process reliability
- Gravimetric batch mix units for accurate mixing and dosing
- Efficient resin dryers for stationary and mobile use
- Energy-saving dryers respond to pellet throughput and water content
- Custom pultrusion lines for high-quality LFT compoundsPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=29437
in JEC COMPOSITES MAGAZINE > N° 117 (11-12/2017) . - p. 35-36[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 19380 - Périodique Bibliothèque principale Documentaires Disponible Influence of crystal structure on thermo-mechanical properties of injection molded 𝛃-nucleated iPP / A. Hamza in INTERNATIONAL POLYMER PROCESSING, Vol. 36, N° 5 (2021)
[article]
Titre : Influence of crystal structure on thermo-mechanical properties of injection molded 𝛃-nucleated iPP Type de document : texte imprimé Auteurs : A. Hamza, Auteur ; R. K. Arya, Auteur ; A. D. Palsodkar, Auteur ; G. R. Bhadu, Auteur ; S. J. A. Rizvi, Auteur Année de publication : 2021 Article en page(s) : p. 545-556 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Agent de nucléation
Caractérisation
Matériaux -- Propriétés thermomécaniques
Matières plastiques
Matières plastiques -- Moulage par injection
Mélange
Polymères -- Propriétés thermomécaniques
Polymères isotactiques
Polypropylène greffé anhydride maléique
Structure cristalline (solide)
Thermodurcissables -- Propriétés thermomécaniquesIndex. décimale : 668.4 Plastiques, vinyles Résumé : Isotactic polypropylene (iPP) was nucleated in-situ with calcium pimelate during melt compounding. Calcium pimelate is a highly effective β-nucleator for isotactic polypropylene (iPP). The β-nucleated iPP was characterized by wide angle x-ray diffraction (WAXD) and differential scanning calorimetry (DSC) for its crystallinity and crystal structure. In addition, the injection-molded samples were tested for thermo-mechanical properties. It is found that very low quantity (< 0.1 wt. %) of β-nucleator is required to produce sufficiently high β-crystal fraction (Kβ) in isotactic polypropylene. β-nucleated iPP shows increment of 11 to 14 °C in its heat deflection temperature (HDT). It was also observed that slow cooling rate of β-nucleated iPP promotes the formation of β-crystals and that tensile stretching leads to complete transformation of β crystals into a-crystals at room temperature. It was also revealed that the presence of maleic anhydride grafted polypropylene (PP-g-MA), a well-known coupling agent (or compatibilizer), may reduce the (Kβ) value to a marginal extent. It was also observed that the thermo-mechanical properties were not much affected by the presence of PP-g-MA. Therefore, calcium pimelate may be used as β-nucleator in case of neat as well as reinforced polypropylene containing maleic anhydride as coupling agent. Note de contenu : - EXPERIMENTAL : Materials - Melt compounding - Injection molding - Testing of molded specimens
- RESULTS AND DISCUSSION : Effect of concentration of β-nucleator on thermo-mechanical properties of iPP - Effect of coupling agent (PP-g-ma) on the efficiency of β-nucleator - Stretching induced (β-α) transformation in β-iPP
- Table 1 : Injection molding parameters
- Table 2 : Crystallinity of neat and 𝛽-iPP at different concentrations of 𝛃-nucleator (calculated from WAXD data)
- Table 3 : Crystallinity of neat- and 𝛃-iPP at different concentrations of 𝛃-nucleator (calculated from DSC first heating data)
- Table 4 : Results of DSC second heating scan for neat and 𝛃-nucleated iPP
- Table 5 : Crystallinity values of 𝛃-iPP with different concentration (wt.%) of PP-g-MA
- Table 6 : DSC-second melting and crystallization parameters for 𝛃-nucleated iPP containing coupling agent (PP-g-MA)
- Table 7 : Effect of stretching on crystallinity and crystal structureDOI : https://doi.org/10.1515/ipp-2020-4106 En ligne : https://drive.google.com/file/d/1fBkbI5UTQhKXftRExRvGTPuJb7sNbvIl/view?usp=shari [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=36521
in INTERNATIONAL POLYMER PROCESSING > Vol. 36, N° 5 (2021) . - p. 545-556[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23735 - Périodique Bibliothèque principale Documentaires Disponible PermalinkPermalinkInvestigation of edge formation during the coating process of Li-ion battery electrodes / Sandro Spiegel in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 19, N° 1 (01/2022)
PermalinkInvestigation of the moldability parameters of PEG based steatite feedstocks by powder injection molding / S. Erguney in INTERNATIONAL POLYMER PROCESSING, Vol. XXVI, N° 2 (05/2011)
PermalinkKeratin recovered from tannery wastes as a filler for rubber mixes / Anita Przepiórkowska in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 88, N° 4 (07-08/2004)
PermalinkLatex blends : an approach to zero VOC coatings / Mitchell A. Winnik in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 68, N° 852 (01/1996)
PermalinkLead chromate replacement - old hat, but still a long process ? / Jürgen Ott in SURFACE COATINGS INTERNATIONAL, Vol. 98.4 (09/2015)
PermalinkLead chromate replacement - old hat, but still a long process ? / Jürgen Ott in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 205, N° 4610 (07/2015)
PermalinkLow density polypropylene/waste cellulose fiber composites by high-shear thermo-kinetic mixer / O. Oguz in INTERNATIONAL POLYMER PROCESSING, Vol. XXXII, N° 5 (11/2017)
PermalinkMat powder coatings for new applications / Alexander Schelling in INTERNATIONAL SURFACE TECHNOLOGY (IST), Vol. 5, N° 1 (2012)
PermalinkMelt processing of wood cellulose tissue and ethylene-acrylic copolymer composites / Ruth Ariño in INTERNATIONAL POLYMER PROCESSING, Vol. XXVIII, N° 4 (08/2013)
PermalinkMéthode de détermination de l’efficacité énergétique d’un procédé de mélangeage d’un biocomposite PLA/cellulose / P. E. Le Marec in MATERIAUX & TECHNIQUES, Vol. 100, N° 5 (2012)
PermalinkPermalinkMixed mineral thixotropes / Klaus Dziwok in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 197, N° 4519 (12/2007)
PermalinkMixing results in the single-screw extruder / Stefan Epple in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 4 (04/2012)
Permalink