Accueil
Catégories
> solvants
solvantsVoir aussi
|
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
[article]
Titre : A formula for success : New research on the property modification of styrenic block polymers using emulsion SBR Type de document : texte imprimé Auteurs : Joan M. Kord, Auteur Année de publication : 2000 Article en page(s) : p. 30-34 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Adhésifs sensibles à la pression
Adhésifs thermofusibles
Caoutchouc styrène-butadiène
Emulsions
Formulation (Génie chimique)
Rhéologie
solvants
ViscositéIndex. décimale : 668.3 Adhésifs et produits semblables Résumé : This work involved a pressure-sensitive adhesive (PSA) formulation utilizing styrenic block polymers, which was modified using an emulsion styrene butadiene polymer and examined for changes to adhesive performance. Also examined were changes to melt rheology, DSC characteristics and hot melt properties. Specific attention was given to formulation effects on shear adhesion failure temperature. Note de contenu : - Emulsion styrene butadiene rubber microstructure/adhesive influence
- Block copolymer microstructure/adhesive influence
- Discussion
- Key questions
- Hot-melt formulas
- Solvent formulations
- Table 1 : Hot-melt formulations
- Table 2 : Initial viscosity after mixing 177 degrees C
- Table 3 : Viscosity after 48 hours 177 degrees C
- Table 4 : Solventborne SBS/SBR blendsEn ligne : https://drive.google.com/file/d/1dpPxzAY43DGk4t0rtRSK44LpVe8NiWyd/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=19711
in ADHESIVES AGE > Vol. 43, N° 1 (01/2000) . - p. 30-34[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 001451 - Périodique Bibliothèque principale Documentaires Disponible Fresh solutions for the paints and coatings industry / Rene Wiersma in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 205, N° 4611 (08/2015)
[article]
Titre : Fresh solutions for the paints and coatings industry Type de document : texte imprimé Auteurs : Rene Wiersma, Auteur ; Monica Karamagi, Auteur Année de publication : 2015 Article en page(s) : p. 25-26 Langues : Anglais (eng) Catégories : Revêtement en phase solvant:Peinture en phase solvant
Revêtements -- Additifs:Peinture -- Additifs
solvantsIndex. décimale : 667.9 Revêtements et enduits Résumé : The role solvents play in paint and coatings, such as the use in long oil alkyd resin formulations. Note de contenu : Fig. 1. The shell middle distillates synthesis process makes the raw material for shell GTL fluids and solvents
Table 1. Key benefits when using shell GTL solvents in paints and coatings productsEn ligne : https://drive.google.com/file/d/1m9eMG2jZwLl4hQHGGztSbtpqy4YbS6ad/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=24934
in POLYMERS PAINT COLOUR JOURNAL - PPCJ > Vol. 205, N° 4611 (08/2015) . - p. 25-26[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 17373 - Périodique Bibliothèque principale Documentaires Disponible Glutaraldehyde retannage - a review and assessment of the properties / Pankaj Kumar Tyagi in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 98, N° 3 (05-06/2014)
[article]
Titre : Glutaraldehyde retannage - a review and assessment of the properties Type de document : texte imprimé Auteurs : Pankaj Kumar Tyagi, Auteur ; Pijush Kanti Chatopadhyay, Auteur ; Goutam Mukherjee, Auteur Année de publication : 2014 Article en page(s) : p. 99-107 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Agents d'expansion (chimie)
Caractérisation
Contraintes (mécanique)
Cuirs et peaux -- Propriétés mécaniques
Déformations (mécanique)
DiméthylbenzèneLe xylène ou diméthylbenzène est un groupe d'hydrocarbures aromatiques dérivés méthylés du benzène. Il est représenté par trois isomères structuraux : 1,2-diméthylbenzène, 1,3-diméthylbenzène et 1,4-diméthylbenzène (appelés respectivement ortho-diméthylbenzène, méta-diméthylbenzène et para-diméthylbenzène). Le xylène technique est un mélange des trois isomères, de composition voisine de méta- (60 %), ortho- (10-25 %) et para- (10-25 %). Tout comme pour le benzène, la structure du xylène est plane. C'est un composé aromatique, et les électrons formant les liaisons π du cycle sont délocalisés, ce qui entraîne une stabilité importante de la structure.
PROPRIETES PHYSICO-CHIMIQUES : Le xylène est un liquide incolore, d'odeur agréable et très inflammable. Il est naturellement présent dans le pétrole et le goudron de houille, et se forme durant les feux de forêts. Les propriétés chimiques diffèrent peu d'un isomère à l'autre. La température de fusion est comprise entre -47,87 °C (m-Xylène) et 13,26 °C (p-Xylène). La température d'ébullition est voisine de 140 °C pour tous les isomères. La densité est de 0,87 (le composé est plus léger que l'eau). L'odeur du xylène devient détectable pour des concentrations de l'ordre de 0,08 à 3,7 ppm, et le goût est apparent dans l'eau pour des concentrations de l'ordre de 0,53 à 1,8 ppm.
PRODUCTION ET UTILISATION : Le xylène est produit à partir du pétrole dans l'industrie pétrochimique. En termes de volume, c'est l'un des 30 composés chimiques les plus produits aux USA (environ 450 000 tonnes par an). Il est utilisé comme solvant, notamment en tant que céruménolytique. Il est aussi utilisé par les industries de l'impression, du caoutchouc et du cuir. Il est employé comme réactif de départ pour la production d'acide téréphtalique, utilisé comme monomère pour la production de polymères de type téréphtalate. Le xylène est également utilisé pour le nettoyage, comme pesticide, utilisé aussi en parasitologie dans la méthode de KOHN pour vérifier la bonne déshydratation de frottis de selle, comme diluant pour la peinture ainsi que dans la peinture et les vernis. Il est présent en faibles quantités dans les carburants pour l'aviation ainsi que dans l'essence (voir l'article « Pouvoir calorifique »). En présence de réactifs oxydants, comme le permanganate de potassium KMnO4, le groupement méthyle peut être oxydé jusqu'à former un acide carboxylique. Lorsque les deux groupements méthyle sont oxydés, le o-xylène forme l'acide phtalique et le p-xylène l'acide téréphtalique.
Eau
Essais dynamiques
Evaluation visuelle
Glutaraldéhyde
Hydrodynamique
Résistance chimique
Résistance thermique
solvants
Thermogravimétrie
ToluèneLe toluène, également appelé méthylbenzène ou phénylméthane est un hydrocarbure aromatique sous la forme d'un liquide transparent, très répandu et utilisé comme produit de départ industriel ou comme solvant. Il dissout un grand nombre d'huiles, graisses, résines (naturelles ou de synthèse). Il a une odeur caractéristique (type dissolvant pour peinture) rappelant celle, douceâtre, du benzène apparenté.
Wet-blue (tannage)Peau tannée au chrome (le chrome donne une couleur bleue)Index. décimale : 675.2 Préparation du cuir naturel. Tannage Résumé : Two different samples of cow softy leather (identified as CSG0 and CSG3) were prepared from a cow wet-blue of Indian origin. CSG0 was the control sample and CSG3 had 3% glutaraldehyde added to the process. Other unit operations (physical and chemical) were the same in both samples. Thermal, mechanical and hydrodynamic swelling behaviour of these samples was studied in order to correlate it with the cross-linking densities of the samples.
The hydrodynamic swelling behavior was studied in three different solvents (viz. water, toluene and xylene), assuming definite solvent-bovine collagen interaction parameters, cross-link densities were evaluated by applying the Flory-Rehner equation.
Regarding the mechanical behaviour, some distinguished theoretical models (e.g. Mooney-Rivlin, Flory, and Martin, Roth & Stiehler (MRS)) were tried for fit with the results obtained in stress-strain analyses. A few constants for Cr-tanned cow leather were derived, the value of constant A in MRS equation remained in the range of 0.9-1.0 and constant B in Flory's equation remained in the range of 0.001-0.005, not reported previously in the literature. It was found that glutaraldehyde raised cross¬linking density of chrome-tanned leather from 2.59 x 10-3 mol.m-3 to 3.27 x 10-3 mol.m-3, which is reflected in CSG3 greater thermal resistance, but the physical degree of cross links, calculated from Flory-Rehner equation, decreases which is reflected in CSG3 poor solvent resistance in comparison to CSGo.Note de contenu : - EXPERIMENTAL PROCEDURES : Materials - Preparation of samples - Characterization
- RESULTS AND DISCUSSION : Mechanical properties - TGA - Swelling - Boiling testEn ligne : https://drive.google.com/file/d/1AxVrS28-0UuxjLxrl8pUUVs8L5XAxS-l/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=21529
in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC) > Vol. 98, N° 3 (05-06/2014) . - p. 99-107[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 16323 - Périodique Bibliothèque principale Documentaires Disponible Good adhesive bonding starts with surface preparation / Craig D. Mackay in ADHESIVES AGE, Vol. 41, N° 6 (06/1998)
[article]
Titre : Good adhesive bonding starts with surface preparation Type de document : texte imprimé Auteurs : Craig D. Mackay, Auteur Année de publication : 1998 Article en page(s) : p. 30-32 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Abrasion
Collage
Mouillage (chimie des surfaces)
Rayonnements ionisants
solvants
Surfaces -- Nettoyage
Technique des plasmas
Traitement chimique
Traitement thermique
Traîtements de surfaceIndex. décimale : 668.3 Adhésifs et produits semblables Résumé : Whether you are bonding aluminum to brass on a thermal-switch or a horse shoe to a horse's hoof, proper surface preparation is essential to good adhesive bonding.
To ensure you have high bond strength and permanence, it is important to thoroughly clean and prepare the substrates. Proper surface preparation is just as important in coating, potting and encapsulation applications.
If the surface of a substrate is properly prepared, the cause of any bond failure will most likely be 'cohesive failure.' On the other hand, if the problem is 'adhesive failure,' alternative surface preparation methods should be investigated. Ideally a bond failure should be primarily cohesive.Note de contenu : - Factors in adhesive bonding
- Surface wetting
- Surface preparation methods
- Solvent cleaning
- Surface abrasion
- Chemical treatment
- Gas plasma treatment
- Flame treatment
- Ion beamEn ligne : https://drive.google.com/file/d/1D9SYsTCsxEyce0MqehLGdYTu3BRfOnlZ/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=20309
in ADHESIVES AGE > Vol. 41, N° 6 (06/1998) . - p. 30-32[article]Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 001434 - Périodique Bibliothèque principale Documentaires Exclu du prêt Greener chemistry for fragrance extracts / Ray Marriott in PERSONAL CARE EUROPE, Vol. 4, N° 2 (06/2011)
[article]
Titre : Greener chemistry for fragrance extracts Type de document : texte imprimé Auteurs : Ray Marriott, Auteur Année de publication : 2011 Article en page(s) : p. 91-94 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Composés aromatiques -- Synthèse
Extraction (chimie)
Fluides supercritiques
Parfums
solvantsIndex. décimale : 668.5 Parfums et cosmétiques Résumé : Over the past decade the demand for more natural food additives from consumers has resulted in an increase in the use of natural flavourings. However, this has not been reflected nearly so much in fragrances or fragrance formulations for personal care products.
Unlike food flavourings, there is no direct legislation that defines natural flavourings and processes that can be used in the preparation of natural fragrance molecules; instead legislation has been limited to restricting certain molecules that may cause adverse reactions. Guidelines, such as the recent IFRA guidance to green fragrance terminology, defines “Green”, “Green Chemistry” and “Natural” and this guidance broadly reflects EPA guidance on green chemistry and the EU food flavouring definition of natural. Market pull for the development of more natural fragrance formulations or greater use of natural extracts has been slower than that seen for food ingredients and so drivers for greener technologies have been focused on improving yields, reducing cost, minimising waste generation or providing new technologies that can deliver opportunities to produce new fragrance molecules.Note de contenu : - Greener extraction solvents
- Clean synthesis of fragrance molecules
Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=13427
in PERSONAL CARE EUROPE > Vol. 4, N° 2 (06/2011) . - p. 91-94[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 13592 - Périodique Bibliothèque principale Documentaires Disponible Handbook of solvents / Michael Ash / Endicott [USA] : Synapse Information Resources (2003)
PermalinkHansen solubility parameters (HSP) : 1-Introduction / Clifford K. Schoff in COATINGS TECH, Vol. 15, N° 5 (05/2018)
PermalinkHansen solubility parameters / Charles M. Hansen / Boca Raton [Etats-Unis] : CRC Press - Taylor Francis Group (2007)
PermalinkHigh build elastomeric coatings : A novel approach to long term concrete protection / J. K. Sharma in PAINTINDIA, Vol. XLVII, N° 10 (10/1997)
PermalinkHigh levels of cleanliness and biocompatible surfaces in INTERNATIONAL SURFACE TECHNOLOGY (IST), Vol. 9, N° 2 (2016)
PermalinkHigh performance paint additives for solvent based coating / Tsuyoshi Oba in PAINTINDIA, Vol. LX, N° 5 (05/2010)
PermalinkHigh standards of cleanliness for specialist parts / David Bartels in INTERNATIONAL SURFACE TECHNOLOGY (IST), Vol. 12, N° 1 (2019)
PermalinkA holistic approach to adhesive selection / James Jim E. Swope in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 24, N° 10 (10/2017)
PermalinkIndustrial solvents handbook / Ibert Mellan / Park Ridge - New Jersey [Etats-Unis] : Noyes data corporation
PermalinkIndustrie des rubans adhésifs. Mise de la pénétration des solvants dans les rubans adhésifs de masquage - Norme NF EN 12036 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1996)
PermalinkInfluence of carbon black with different polar groups on the solvent N-methylmorpholine N-oxide / Hong Jin in COLORATION TECHNOLOGY, Vol. 137, N° 5 (10/2021)
PermalinkInfluence of pigment addition on the properties of polymer films for leather finishing / Cristiana Winter in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 101, N° 2 (03-04/2017)
PermalinkLes interfaces métal/eau : un défi pour la modélisation / Paul Clabaut in L'ACTUALITE CHIMIQUE, N° 465 (09/2021)
PermalinkInterfacial studies of crosslinked polyurethanes ; Part I. quantitative and structural aspects of crosslinked near film-air and film-substrate interfaces in solvent-borne polyurethanes / Anneke M. Kaminski in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 69, N° 872 (09/1997)
PermalinkInvestigation into deep eutectic solvents / Andrew Abbott in LEATHER INTERNATIONAL, Vol. 217, N° 4860 (05/2016)
Permalink