Accueil
KUNSTSTOFFE INTERNATIONAL . Vol. 98, N° 2/2008Flame retardance : Strict and broader requirements / Compounding : Tuning for screws / Special Laser technology : New processes for thermal joining of plastic to metal or ceramicMention de date : 02/2008 Paru le : 20/02/2008 |
Dépouillements
Ajouter le résultat dans votre panierAs good as welded / Jens Holtkamp in KUNSTSTOFFE INTERNATIONAL, Vol. 98, N° 2/2008 (02/2008)
[article]
Titre : As good as welded Type de document : texte imprimé Auteurs : Jens Holtkamp, Auteur ; Matthias Poggel, Auteur ; Arnold Gillner ; Wolf-Martin Hoffmann ; Walter Michaeli, Auteur Année de publication : 2008 Article en page(s) : p. 7-11 Note générale : Bibliogr. Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Joining technology - Two new processes making use of laser technology have been developed for the thermal joining of plastic to metal or ceramic. Here the laser beam first of all penetrates the plastic component before it is absorbed by the heat resistant material and converted to heat. After this a positive joint is made between the surfaces or via the contours of the nonfusible mating material. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=6626
in KUNSTSTOFFE INTERNATIONAL > Vol. 98, N° 2/2008 (02/2008) . - p. 7-11[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 009774 - Périodique Bibliothèque principale Documentaires Disponible Acquisition poker and dramatic upswings / Clemens Doriat in KUNSTSTOFFE INTERNATIONAL, Vol. 98, N° 2/2008 (02/2008)
[article]
Titre : Acquisition poker and dramatic upswings Type de document : texte imprimé Auteurs : Clemens Doriat, Auteur Année de publication : 2008 Article en page(s) : p. 16-18 Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Injection molding machine construction - The sector can look back on an eventful 2007 – especially as far as the manufacturers of injection molding machines are concerned – with a dramatic upturn in the economy, record sales, radical structural changes in both companies and markets, surprising changes in the holders of key posts and, at the end, an almost euphoric K exhibition. And the New Year has got off to a dramatic start once again on a number of counts. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=6627
in KUNSTSTOFFE INTERNATIONAL > Vol. 98, N° 2/2008 (02/2008) . - p. 16-18[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 009774 - Périodique Bibliothèque principale Documentaires Disponible Tuning for screws / Athanassios Elas in KUNSTSTOFFE INTERNATIONAL, Vol. 98, N° 2/2008 (02/2008)
[article]
Titre : Tuning for screws Type de document : texte imprimé Auteurs : Athanassios Elas, Auteur Année de publication : 2008 Article en page(s) : p.19-23 Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Compounding - The K 2007 plastics exhibition held last year was a good opportunity to gain a comprehensive overview of new developments and the possibilities for optimization in the field of compounding. This article summarizes the results of the developments underway at equipment manufacturers serving this branch of industry and points out new trends. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=6628
in KUNSTSTOFFE INTERNATIONAL > Vol. 98, N° 2/2008 (02/2008) . - p.19-23[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 009774 - Périodique Bibliothèque principale Documentaires Disponible Efficient design of pneumatic conveying systems / Harald Wilms in KUNSTSTOFFE INTERNATIONAL, Vol. 98, N° 2/2008 (02/2008)
[article]
Titre : Efficient design of pneumatic conveying systems Type de document : texte imprimé Auteurs : Harald Wilms, Auteur Année de publication : 2008 Article en page(s) : p.24-28 Note générale : Bibliogr. Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : System optimization - Pneumatic conveying systems for the plastics industry require a substantially higher energy input than other conveying methods. To that extent it is of great economic importance to any operator of such a conveying system to optimize the investment and operating costs incurred. This paper shows general tendencies with reference to an example from industry. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=6629
in KUNSTSTOFFE INTERNATIONAL > Vol. 98, N° 2/2008 (02/2008) . - p.24-28[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 009774 - Périodique Bibliothèque principale Documentaires Disponible Calculating large filter surface areas / Wolfgang Ernst in KUNSTSTOFFE INTERNATIONAL, Vol. 98, N° 2/2008 (02/2008)
[article]
Titre : Calculating large filter surface areas Type de document : texte imprimé Auteurs : Wolfgang Ernst, Auteur ; Birgit Funke, Auteur ; H. Potente, Auteur ; Knut Hobrecht, Auteur ; Ralf Schlottmann, Auteur Année de publication : 2008 Article en page(s) : p. 29-32 Note générale : Bibliogr. Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Melt filtration - The demanding standards regarding melt quality in fiber and film systems require the use of large-area melt filters. To design and optimize such filters, a computation tool has been developed that allows the essential process data such as required pressure, throughput distribution or residence time to be determined. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=6630
in KUNSTSTOFFE INTERNATIONAL > Vol. 98, N° 2/2008 (02/2008) . - p. 29-32[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 009774 - Périodique Bibliothèque principale Documentaires Disponible Doping for masterbatch production / Matthias Weinmann in KUNSTSTOFFE INTERNATIONAL, Vol. 98, N° 2/2008 (02/2008)
[article]
Titre : Doping for masterbatch production Type de document : texte imprimé Auteurs : Matthias Weinmann, Auteur Année de publication : 2008 Article en page(s) : p. 33-35 Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Performance improvement - Many plastic products contain additive masterbatches, which provide the polymer with specific properties such as improved flame retardance or antistatic characteristics. With such relatively expensive substances, efficient production plays a major role. It is principally achieved through sophisticated machine technology. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=6631
in KUNSTSTOFFE INTERNATIONAL > Vol. 98, N° 2/2008 (02/2008) . - p. 33-35[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 009774 - Périodique Bibliothèque principale Documentaires Disponible Small and powerful in KUNSTSTOFFE INTERNATIONAL, Vol. 98, N° 2/2008 (02/2008)
[article]
Titre : Small and powerful Type de document : texte imprimé Année de publication : 2008 Article en page(s) : p. 36-38 Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Micropelletizing - Micropellets are supplanting established product forms, such as powders, regrind or pellets, in increasing numbers of areas. The production of these tiny "grains" places high demands on plant manufacturers and operators. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=6632
in KUNSTSTOFFE INTERNATIONAL > Vol. 98, N° 2/2008 (02/2008) . - p. 36-38[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 009774 - Périodique Bibliothèque principale Documentaires Disponible Ancient sarcophagus with a new shine / David Westaway in KUNSTSTOFFE INTERNATIONAL, Vol. 98, N° 2/2008 (02/2008)
[article]
Titre : Ancient sarcophagus with a new shine Type de document : texte imprimé Auteurs : David Westaway, Auteur Année de publication : 2008 Article en page(s) : p. 39-41 Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : The stereolithography process helped to recreate a classical masterpiece using materials normally associated with aerospace and motorsport applications. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=6633
in KUNSTSTOFFE INTERNATIONAL > Vol. 98, N° 2/2008 (02/2008) . - p. 39-41[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 009774 - Périodique Bibliothèque principale Documentaires Disponible New thermoplastic powder for selective laser sintering / Dominik Rietzel in KUNSTSTOFFE INTERNATIONAL, Vol. 98, N° 2/2008 (02/2008)
[article]
Titre : New thermoplastic powder for selective laser sintering Type de document : texte imprimé Auteurs : Dominik Rietzel, Auteur ; Ernst Schmachtenberg, Auteur ; Robert Feulner, Auteur ; Bettina Wendel, Auteur Année de publication : 2008 Article en page(s) : p. 42-45 Note générale : Bibliogr. Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Materials - Contrary to classical plastic processing methods, the choice of materials for selective laser sintering (SLS) – and thereby also the range of possible application areas – is limited. Recent work has shown that plastics, which previously were unsuitable for SLS, can now be processed into powders for the fabrication of complex components. First trials with POM resulted in parts with appealing surfaces and good mechanical properties. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=6634
in KUNSTSTOFFE INTERNATIONAL > Vol. 98, N° 2/2008 (02/2008) . - p. 42-45[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 009774 - Périodique Bibliothèque principale Documentaires Disponible One-part hinge-pin seal for toggle machines / Bernd Claussen in KUNSTSTOFFE INTERNATIONAL, Vol. 98, N° 2/2008 (02/2008)
[article]
Titre : One-part hinge-pin seal for toggle machines Type de document : texte imprimé Auteurs : Bernd Claussen, Auteur Année de publication : 2008 Article en page(s) : p. 46-47 Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Clean-room production - Cleanliness is a key parameter for injection molding machines. Hydraulic drives and locking systems must be leak-free, particularly for manufacturing high-quality products. In the past, mechanical locking with toggle machines has proved extremely critical in this regard. A novel seal now reliably prevents lubricant leakage at the highly stressed joints. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=6635
in KUNSTSTOFFE INTERNATIONAL > Vol. 98, N° 2/2008 (02/2008) . - p. 46-47[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 009774 - Périodique Bibliothèque principale Documentaires Disponible Connecting material / Vivian König in KUNSTSTOFFE INTERNATIONAL, Vol. 98, N° 2/2008 (02/2008)
[article]
Titre : Connecting material Type de document : texte imprimé Auteurs : Vivian König, Auteur ; Hans-Karl Engeldinger, Auteur Année de publication : 2008 Article en page(s) : p. 48-51 Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Miniaturization - For mobile phone production instead of mechanical connectors extremely thin tapes are used. They hold all the parts together reliably on small areas, are extremely temperature resistant and adapt themselves flexibly to new mobile phone models – and all that with economical and process reliable workability. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=6636
in KUNSTSTOFFE INTERNATIONAL > Vol. 98, N° 2/2008 (02/2008) . - p. 48-51[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 009774 - Périodique Bibliothèque principale Documentaires Disponible Stiff, tough and resistant / Franz Felsberger in KUNSTSTOFFE INTERNATIONAL, Vol. 98, N° 2/2008 (02/2008)
[article]
Titre : Stiff, tough and resistant Type de document : texte imprimé Auteurs : Franz Felsberger, Auteur Année de publication : 2008 Article en page(s) : p. 52-54 Note générale : Bibliogr. Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Polyamide 12 - A newly developed polyamide 12 provides extremely high stiffness together with high toughness. No conventional polyamide has so far been able to match these properties. This opens up potential for novel heavy-duty applications, particularly in fields such as medical, dental and laboratory technology, where good chemical resistance is just as important as mechanical strength. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=6639
in KUNSTSTOFFE INTERNATIONAL > Vol. 98, N° 2/2008 (02/2008) . - p. 52-54[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 009774 - Périodique Bibliothèque principale Documentaires Disponible Premium surface protection in KUNSTSTOFFE INTERNATIONAL, Vol. 98, N° 2/2008 (02/2008)
[article]
Titre : Premium surface protection Type de document : texte imprimé Année de publication : 2008 Article en page(s) : p. 55 Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Polyamide sheets - Décor films based on polyamide are replacing varnishing in the area of engine covers, giving them precious metallic looks. For several years already, films have been successfully used as protective and decorative elements in sports articles. They impress consumers by their constantly new and sumptuous designs. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=6640
in KUNSTSTOFFE INTERNATIONAL > Vol. 98, N° 2/2008 (02/2008) . - p. 55[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 009774 - Périodique Bibliothèque principale Documentaires Disponible Growth in specialties / Matthias Hund in KUNSTSTOFFE INTERNATIONAL, Vol. 98, N° 2/2008 (02/2008)
[article]
Titre : Growth in specialties Type de document : texte imprimé Auteurs : Matthias Hund, Auteur Année de publication : 2008 Article en page(s) : p. 56-60 Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Compounds, additives, distribution - Compounding is enjoying renewed importance. The resurgence of compounding is typically happening in sectors that cannot be served by masterbatches. For instance, systems with high filler levels may be involved or it may be a matter of achieving the finest possible distribution within the compound. Newly developed additives are permitting numerous customized innovations. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=6641
in KUNSTSTOFFE INTERNATIONAL > Vol. 98, N° 2/2008 (02/2008) . - p. 56-60[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 009774 - Périodique Bibliothèque principale Documentaires Disponible Few new products but business is booming / Jürgen Troitzsch in KUNSTSTOFFE INTERNATIONAL, Vol. 98, N° 2/2008 (02/2008)
[article]
Titre : Few new products but business is booming Type de document : texte imprimé Auteurs : Jürgen Troitzsch, Auteur Année de publication : 2008 Article en page(s) : p 61-64 Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Flame retardants - With the exception of a handful of new developments there is little exciting to say on the subject of flame retardants. The market is growing and production capacities are being expanded since flame retardancy requirements are becoming stricter and more universal. Some phosphorous compounds are new, whilst existing flame retardant systems are being refined. The sector is however in good spirits. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=6642
in KUNSTSTOFFE INTERNATIONAL > Vol. 98, N° 2/2008 (02/2008) . - p 61-64[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 009774 - Périodique Bibliothèque principale Documentaires Disponible Shielding plastic housings / Günther Pflug in KUNSTSTOFFE INTERNATIONAL, Vol. 98, N° 2/2008 (02/2008)
[article]
Titre : Shielding plastic housings Type de document : texte imprimé Auteurs : Günther Pflug, Auteur ; Stefan Reinemann, Auteur ; Axel Hungsberg ; Axel Wipprecht Année de publication : 2008 Article en page(s) : p. 65-69 Note générale : Bibliogr. Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Polymer MWNT composites - Fillers based on carbon nanotubes provide plastic housings not only with protection against electrostatic discharge, but also shield electronic systems from electromagnetic interference. In order to investigate these effects in greater detail, multi-wall carbon nanotubes (MWNT) were incorporated into selected polymers as the shielding component both alone and in combination with magnetic or electrically conductive additive. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=6643
in KUNSTSTOFFE INTERNATIONAL > Vol. 98, N° 2/2008 (02/2008) . - p. 65-69[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 009774 - Périodique Bibliothèque principale Documentaires Disponible
Exemplaires (1)
Code-barres | Cote | Support | Localisation | Section | Disponibilité |
---|---|---|---|---|---|
009774 | - | Périodique | Bibliothèque principale | Documentaires | Disponible |