Accueil
EUROPEAN COATINGS JOURNAL (ECJ) . N° 5Radiation curingMention de date : 05/2020 Paru le : 10/06/2020 |
Dépouillements
Ajouter le résultat dans votre panier
[article]
Titre : UV, excimer or LED ? Type de document : texte imprimé Auteurs : Nina Musche, Auteur Année de publication : 2020 Article en page(s) : p. 16-17 Langues : Anglais (eng) Catégories : Laque et laquage
Laques (produits capillaires)
Liants
Photoamorceurs (chimie)
Produits commerciaux
Revêtements (produits chimiques):Peinture (produits chimiques)
Revêtements -- Séchage sous rayonnement
Revêtements organiquesIndex. décimale : 667.9 Revêtements et enduits Résumé : Radiation-curing lacquers are no longer a marginal phenomenon in industrial lacquer processing. Technology has evolved, so there are different technologies for activation available today. The photoinitiators and binders has to be adapted. En ligne : https://drive.google.com/file/d/1R9BJ-6df8WuiD3rM-0PY4UyHWnNnyLAp/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=34171
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 5 (05/2020) . - p. 16-17[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 21745 - Périodique Bibliothèque principale Documentaires Disponible The right dose for the right cure / Xavier Drujon in EUROPEAN COATINGS JOURNAL (ECJ), N° 5 (05/2020)
[article]
Titre : The right dose for the right cure : Effect of acrylate monomer and oligomer selection on the properties of cured coatings Type de document : texte imprimé Auteurs : Xavier Drujon, Auteur Année de publication : 2020 Article en page(s) : p. 18-23 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Copolymère uréthane acrylate
Monomères
Oligomères
Revêtements -- Propriétés chimiques
Revêtements anti-adhésifs -- Séchage sous rayonnement électronique
Revêtements anti-adhésion -- Séchage sous rayonnement ultraviolet
Revêtements organiquesIndex. décimale : 667.9 Revêtements et enduits Résumé : UV is by far the most common source of radiation-curing energy, and is widely used for coatings on heat-sensitive substrates. It has expanded significantly into a multiplicity of other applications, this expansion being driven by performance, economics and environmental considerations. However, EB technology can be more relevant in some high-speed and high-volume applications and can be expected to contribute substantially to the growth of radiation curing in the future. Note de contenu : - EB to boost growth of radiation curing
- Experimental : Raw materials - Equipment and method
- Reactivity
- Solvent resistance
- Higher voltage is better
- Hardness
- Double-bond conversion unexpectedly lower
- EB and UV curing of ethoxylated TMPTAS
- Hardness tails off under UV
- Fig. 1a : EB curing of UA3 (f=6) under an applied voltage of 80 kV and varying dose
- Fig. 1b : EB curing of UA2 (f=2) under and applied voltage of 80 kV and varying dose
- Fig. 2 : Hardness (Persoz) of various UAs as a function of diluting monomer and type of cure
- Fig. 3 : Hardness as a function of the wt% ethoxy in the monomer for 60/40 UA5/TMPX(EO)TA blends cured by EB and UV
- Table 1 : Acrylate-functional monomers
- Table 2 : Acrylate-functional urethane acrylate oligomers
- Table 3 : Cure of UA3 (f=6) with a dose of 30 kGy under different voltages
- Table 4 : DMA and FTIR analysis of UA4/HDDA films cured by UV and EB
En ligne : https://drive.google.com/file/d/1qZ0Hhncpnue3mOGsHUOs1fKZDf4bgjaS/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=34172
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 5 (05/2020) . - p. 18-23[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 21745 - Périodique Bibliothèque principale Documentaires Disponible
[article]
Titre : An update on Korea reach Type de document : texte imprimé Auteurs : Bryan Zhou, Auteur Année de publication : 2020 Article en page(s) : p. 26-27 Langues : Anglais (eng) Catégories : Chimie industrielle -- Législation -- Corée
Revêtements (produits chimiques):Peinture (produits chimiques)Index. décimale : 667.9 Revêtements et enduits Résumé : The deadline of pre-registration was passed on June 30th 2019, there have been more than 177 000 pre-registrations submitted for more than 16000 substances. If non-Korean companies did not complete their pre-registration before and still plan to export their chemical products to Korea, there is the option to carry out late pre-registration. Note de contenu : - Lead registrant (LR)
- Active member (AM)
- Passive members (PM)
- Dormant
- Fig. 1 : Deadline of K-REACHEn ligne : https://drive.google.com/file/d/1WF09GWfuRgMQFE1Teh5KyIqSraG52pBa/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=34173
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 5 (05/2020) . - p. 26-27[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 21745 - Périodique Bibliothèque principale Documentaires Disponible Challenging preservation options / Jessica Levin in EUROPEAN COATINGS JOURNAL (ECJ), N° 5 (05/2020)
[article]
Titre : Challenging preservation options : Towards biocide-free water-borne coatings via innovative binders and additives Type de document : texte imprimé Auteurs : Jessica Levin, Auteur ; Wenqin Wang, Auteur Année de publication : 2020 Article en page(s) : p. 28-33 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Antimicrobiens -- Suppression ou remplacement
Contamination microbienne
Copolymère styrène acrylique
Epaississants
Formulation (Génie chimique)
Liants en phase aqueuse
Peinture -- Conservation
Polyacryliques
Polyuréthane éthoxylé modifié de façon hydrophobe
Revêtements en phase aqueuse -- Additifs
Revêtements organiquesIndex. décimale : 667.9 Revêtements et enduits Résumé : Increasing regulatory restrictions mean that there are limited preservation options currently available to the paint and coatings industry for both in-can and dry-film preservation. Experimental binders and thickeners that are more robust to microbial spoilage offer a potential solution and pass challenge testing even when formulated into water-borne paints. Note de contenu : - Regulations necessitate new preservation methods
- Commercially available solutions are limited
- Emergins technologies offer potential
- Development of robust raw materials for standard pH coatings
- Binders more robust against microbial spoilage
- Paint formulated with experimental binders passes challenge tests
- HEUR rheology modifiers that are less prone to microbial spoilage
- Path to reducing spoilage without biocides
- Fig. 1 : Paint performance data on paints based on commercial and experimental soft styrene acrylic binders
- Fig. 2 : Microbial challenge test plates 7 days after challenge 2
- Fig. 3 : A styrene acrylic paint was thickened with various HEURs added at 1.2 kg of polymer actives per 1000 I of paint. The bubble size is proportional to the Brookfield viscosity
- Table 1 : Rating system for estimating the level of microbial contamination on streak plates
- Table 2 : Microbial challenge test results for various acrylic and styrene acrylic binders at pH 7.0-9.5 supplied without biocide
- Table 3 : Paint formulation based on commercial and experimental soft styrene acrylic binders
- Table 4 : Microbial challenge test results for various HEUR rheology modifiers supplied without biocide added. Growth rating in parentheses as describes in Table 1
- Table 5 : Styrene acrylic screening formulation used to test type. 1. Type 2, and type 3 HEURs for thickening performanceEn ligne : https://drive.google.com/file/d/1qZ0eMaU48b8cVGe97f2VUowmbbfvbaSS/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=34174
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 5 (05/2020) . - p. 28-33[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 21745 - Périodique Bibliothèque principale Documentaires Disponible
[article]
Titre : Say good-bye to graffiti : Technology platform for crosslinkers Type de document : texte imprimé Auteurs : André Raukamp, Auteur ; Guido Streukens, Auteur ; Corey King, Auteur Année de publication : 2020 Article en page(s) : p. 34-37 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Basses températures
Essais de résilience
Formulation (Génie chimique)
Matériaux hybrides
Polyuréthanes
Rayures
Résistance à l'abrasion
Réticulants
Revêtements anti-graffitis
Revêtements organiques
Silanes
Vernis -- Additifs
Vernis bi-composantIndex. décimale : 667.9 Revêtements et enduits Résumé : Whether they are on your car, your floor, or your furniture, scratches on finished surfaces are annoying. An innovative technology platform for crosslinkers in the EP-MF and EP-EF families offers a toolbox for a variety of customized solutions so that you can formulate scratch-resistant, low-temperature-curing coatings for use on substrates such as wood, plastic, or metals - solutions that can even be used in anti-graffity coatings. Note de contenu : - Heat curing : a focus on automobile clear coats
- Room-temperature curing - A wide range of potential applications
- High crosslinking density - Highly resistant
- New hybrid crosslinkers for DIY applications
- Table 1 : Different adducts for different applications
- Table 2 : Comparison of the properties of different room-temperature curing systems
- Fig. 1 : IPMS-based silane/urethane hybrid crosslinker having urethane groups and terminated with trifunctional alkoxysilane structures
- Fig. 2 : Varnish comparison (applied on wood panels) using a modified crockmeter scratch test/2K PUR vs. EP-MF 203 formulation
- Fig. 3 : Varnish comparison (applied on aluminium panels) after using ethanol to remove graffiti paints - 2K PUR vs EP-MF 205, vs. EP-MF 203
- Fig. 4 : Ongoing development of flexibility in the EP-MF and EP-EF seriesEn ligne : https://drive.google.com/file/d/19JVFaNSs7XNNcxMZsSv7j3tXrL_hRPVb/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=34175
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 5 (05/2020) . - p. 34-37[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 21745 - Périodique Bibliothèque principale Documentaires Disponible
[article]
Titre : Boosters are here to stay : Solutions for changing biocide labelling issues Type de document : texte imprimé Auteurs : Paul Wood, Auteur Année de publication : 2020 Article en page(s) : p. 38-43 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Antimicrobiens
Chimie industrielle -- Législation -- Pays de l'Union européenne
Produits chimiques -- Classification
Produits chimiques -- Etiquetage
Règlements de sécuritéIndex. décimale : 667.9 Revêtements et enduits Résumé : Ever-increasing and complex European legislation affects the use of biocides and biocidal products in many different applications. REACH (EC 1907/2006) and the Biocidal Products Regulation (528/2012 EC) are just some of those laws. In 2015, the introduction of the 2nd Adaptation to Technical Progress (ATP) of the Classification, Labelling and Packaging (CLP) Regulation (EC 1272/2008) added further to this complexity by introducing the 1/10th labelling rule for all chemical substances, including biocidal active ingredients, classified as skin sensitisers. Note de contenu : - Gradual, continual regulatory changes
- What are boosters ?
- Table 1 : CLP EU H208 warning phrase labelling limits per active ingredient
- Table 2 : Concentration of boosters used in this investigation
- Table 3 : Results of in-can challenge test
- Fig. 1 : Regulatory guidance structureEn ligne : https://drive.google.com/file/d/1HRUtipqc-cwe6cXpdEXqQA0HBFGNHq1M/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=34176
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 5 (05/2020) . - p. 38-43[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 21745 - Périodique Bibliothèque principale Documentaires Disponible
Exemplaires (1)
Code-barres | Cote | Support | Localisation | Section | Disponibilité |
---|---|---|---|---|---|
21745 | - | Périodique | Bibliothèque principale | Documentaires | Disponible |