| Titre : |
Effects on print quality of varying acrylic binder types in water-based flexographic ink formulations |
| Type de document : |
texte imprimé |
| Auteurs : |
Sinan Sonmez, Auteur ; Dania Alsaid, Auteur ; Alexandra Pekarovicova, Auteur ; Paul D. Fleming III, Auteur ; Matthew T. Stoops, Auteur |
| Année de publication : |
2023 |
| Article en page(s) : |
p. 330-337 |
| Note générale : |
Bibliogr. |
| Langues : |
Anglais (eng) |
| Catégories : |
Cyan Le cyan est, par définition, la couleur primaire complémentaire du rouge, dans la synthèse soustractive des couleurs utilisée en photographie argentique en couleurs et en imprimerie.
Encre en phase aqueuse
Encre flexographique
Formulation (Génie chimique)
Liants en phase aqueuse
Polyacryliques
|
| Index. décimale : |
667.3 Teinture et impression des tissus |
| Résumé : |
The ink industry is one of the world's largest markets due to the increasing demand for printing inks for the packaging industry. Flexography printing is a well-known promising technology for large-area printing due to its high printing speed and roll-to-roll capability to print economically on a variety of surfaces and is used in nearly in all areas of packaging printing. Water-based inks are considered non-toxic, odourless, and more environmentally friendly options compared to solvent-based inks. Therefore, in this article, the goal was to develop new water-based ink formulation with different acrylic binders for flexographic printing on commercial solid bleached sulphate (SBS) board. Five inks were formulated with four different acrylic binders and compared to a commercially available ink to study their performance. The developed inks were investigated with regard to their print qualities and print characteristics. It was found that the binder type influenced some print quality while the effect was not significant for others. Using flexography printed cyan inks, the ink formulated with the highest molecular weight had the lowest print density and the largest tonal value increase (TVI) observed between 40 and 60 tone values. The same ink had the largest mottle values and variation in topography. For values of print contrast and delta gloss at 75°, although differences were observed between average values, data had inconclusive variation and spread around averages, where no conclusive trends or effects of acrylic binder type on these response factors were observed. Print chroma and dot roundness results were equally close for all printed samples. |
| Note de contenu : |
- Ink formulation
- Printing conditions
- Table 1 : The optical and physical properties of solid bleached sulphate (SBS) board
- Table 2 : The physical and chemical properties of pigment dispersion
- Table 3 : The chemical properties of acrylic resins used in ink formulations
- Table 4 : A standard water-based flexographic ink formulation
- Table 5 : The CIE L*a*b* colour values of printed test samples
- Table 6 : Print topography and mottle properties of printed test samples
- Table 7 : Dot measurements of 15% screen dots of printed test samples
- Table 8 : Print rub resistance properties of printed test samples |
| DOI : |
https://doi.org/10.1111/cote.12650 |
| En ligne : |
https://onlinelibrary.wiley.com/doi/epdf/10.1111/cote.12650 |
| Format de la ressource électronique : |
Pdf |
| Permalink : |
https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=39542 |
in COLORATION TECHNOLOGY > Vol. 139, N° 3 (06/2023) . - p. 330-337
Aller sur edunet
Accueil
Ajouter le résultat dans votre panier Affiner la rechercheChallenges for UV curing in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 196, N° 4503 (08/2006)
