| Titre : |
Fabrication of flame-retardant and smoke-suppressant rigid polyurethane foam modified by hydrolyzed keratin |
| Type de document : |
texte imprimé |
| Auteurs : |
Xu Zhang, Auteur ; Chen Xu, Auteur ; Hua Xie, Auteur |
| Année de publication : |
2023 |
| Article en page(s) : |
p. 257-266 |
| Note générale : |
Bibliogr. |
| Langues : |
Anglais (eng) |
| Catégories : |
Caractérisation
Coupe-fumée
Densité
Fumée -- Analyse
IgnifugeantsComposé chimique utilisé pour réduire l'inflammabilité. Il peut être incorporé au produit durant sa fabrication ou appliqué ultérieurement à sa surface.
Kératines hydrolysées
Mousses plastiques
Mousses plastiques -- Propriétés thermiques
Polymères ignifuges
Polyphosphate d'ammonium
Polyuréthanes
Stabilité thermique
|
| Index. décimale : |
668.4 Plastiques, vinyles |
| Résumé : |
Rigid polyurethane foam (RPUF) has been fabricated and modified by hydrolyzed keratin to improve its flame retardancy and smoke suppression. Then, the limiting oxygen index (LOI), cone calorimeter (CONE), thermogravimetric analyzer and scanning electron microscope (SEM) were used to characterize the modified RPUFs. It was found that the LOI of the modified RPUFs increased with the presence of hydrolyzed keratin. In addition, the peak heat release rate (PHRR) and total heat release (THR) of the modified RPUF tended to decrease. The HRR of RPUF-HK5 reduced 28.8 kW/m2 compared with RPUF-0, and the THR of RPUF-HK5 was 0.74 MJ/m2 lower than that of RPUF-0. RPUF-HK5 had the most obvious smoke suppression effect. Compared with RPUF-0, the smoke density (Ds) and light transmittance (T) of RPUF-HK5 decreased by 8.88 and increased by 11.26%, respectively. The current research results showed that hydrolyzed keratin can improve the flame-retardant and smoke-suppression performances of RPUFs and that 5 wt% hydrolyzed keratin was the most suitable ratio for the modified RPUF. |
| Note de contenu : |
- EXPERIMENTAL : Materials - Preparation of the modified RPUFs - Characterization
- RESULTS AND DISCUSSION : LOI analysis - CONE analysis - Carbon residue morphology - Thermal stability analysis - Smoke density (Ds) and light transmittance (T)
- Table 1 : TG curves of the modified RPUFs with hydrolyzed keratin at a heating rate of 40 °C/min
- Table 2 : The pyrolysis kinetic parameters of the modified RPUFs with hydrolyzed keratin
- Table 3 : Smoke density test parameters of the modified RPUFs with Hydrolyzed Keratin under flame conditions |
| DOI : |
https://doi.org/10.1515/ipp-2022-4303 |
| En ligne : |
https://drive.google.com/file/d/11DHLRsRaqNqtwKu8mR_WneF0nRtpwsh-/view?usp=drive [...] |
| Format de la ressource électronique : |
Pdf |
| Permalink : |
https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=39507 |
in INTERNATIONAL POLYMER PROCESSING > Vol. 38, N° 2 (2023) . - p. 257-266
Aller sur edunet
Accueil
Ajouter le résultat dans votre panier Affiner la rechercheFabrication of flame-retardant and smoke-suppressant rigid polyurethane foam modified by hydrolyzed keratin in INTERNATIONAL POLYMER PROCESSING, Vol. 38, N° 2 (2023)
