Accueil
Détail de l'indexation
Ouvrages de la bibliothèque en indexation 620.1
Ajouter le résultat dans votre panier Affiner la recherche
A 14-seater civil aircraft design with an innovative composite structure / Neelakante Gowda in JEC COMPOSITES MAGAZINE, N° 80 (04/2013)
[article]
Titre : A 14-seater civil aircraft design with an innovative composite structure Type de document : texte imprimé Auteurs : Neelakante Gowda, Auteur ; Byji Varughese, Auteur ; Giridharan Arumugam, Auteur ; Ganesh Ramachandrachari, Auteur Année de publication : 2013 Article en page(s) : p. 41-42 Langues : Anglais (eng) Catégories : Avions -- Matériaux
Composites à fibres de carbone
Conception technique
Coût -- Contrôle
Epoxydes
Matériaux -- Allègement
Matériaux -- ImprégnationIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : CSIR-NAL, a leading aerospace laboratory in India, has established sophisticated national facilities for the research and development of flight vehicles. Its main programme focuses on the design, prototype development, flight testing and certification of small- and medium-sized civil aircrafts. In this direction, CSIR-NAL is developing a 14-seater civil aircraft, SARAS. Note de contenu : - Carbon/epoxy prepreg material-
- Cost and weight
- Design and manufacturing
- Military and civil applications
- Fuel and fatigue savingsPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=18981
in JEC COMPOSITES MAGAZINE > N° 80 (04/2013) . - p. 41-42[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 14975 - Périodique Bibliothèque principale Documentaires Disponible Aeronautics : more and more composite solutions / Giotto Castelli in JEC COMPOSITES MAGAZINE, N° 80 (04/2013)
[article]
Titre : Aeronautics : more and more composite solutions Type de document : texte imprimé Auteurs : Giotto Castelli, Auteur ; Christian Borg, Auteur ; Stephen Philipson, Auteur Année de publication : 2013 Article en page(s) : p. 33-34 Langues : Anglais (eng) Catégories : Avions -- Matériaux
Composites à fibres de carbone
Matériaux -- Allègement
Renforts textilesIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : UK aircraft manufacturer e-Go is about to launch a Single Seat De-Regulated (SSDR) aircraft. To build an aircraft with the required weight and mechanical performance, the use of Spread Tow carbon fabrics was essential. On certain parts, the weight saving was as much as 53% Note de contenu : - SSDR category rules
- New category of composite reinforcements
- 53% less weightPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=18978
in JEC COMPOSITES MAGAZINE > N° 80 (04/2013) . - p. 33-34[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 14975 - Périodique Bibliothèque principale Documentaires Disponible An innovative 3D placement technology / Marko Szcesny in JEC COMPOSITES MAGAZINE, N° 109 (11-12/2016)
[article]
Titre : An innovative 3D placement technology Type de document : texte imprimé Auteurs : Marko Szcesny, Auteur ; Wilhelm Rupertsberger, Auteur Année de publication : 2016 Article en page(s) : p. 46-47 Langues : Anglais (eng) Catégories : Automatisation
Composites à fibres de carbone
Coût -- Contrôle
Structures tridimensionnelles
Technique de la productionIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Within the EU-funded research programme LOWFLIP (LOW colt FLexible Integrated Process), the Institute of Aircraft Design and FILL GmbH developed a novel automated production process for carbon fibre composite parts. The main objective of the LOWFLIP process is the efficient automated manufacturing of fibre-reinforced parts with significantly reduced investment costs as well as low process energy consumption compared to state-of-the-art processes. Note de contenu : - Process technology
- Cost reduction
- Advantages
- FIGURES : 1. Gripper and pressure roll system - length deviations are equalized by the segmented grippers while the pressure roll adapts to the mould surface, even on strongly curved geometries - 2. New generation direct ply placement - 3. The LOWFLIP prototype cell during the production of a truck front wall demonstratorPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=28179
in JEC COMPOSITES MAGAZINE > N° 109 (11-12/2016) . - p. 46-47[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 18492 - Périodique Bibliothèque principale Documentaires Disponible An innovative composite energy efficiency solution / Christian Hugues in JEC COMPOSITES MAGAZINE, N° 80 (04/2013)
[article]
Titre : An innovative composite energy efficiency solution Type de document : texte imprimé Auteurs : Christian Hugues, Auteur Année de publication : 2013 Article en page(s) : p. 50-51 Langues : Anglais (eng) Catégories : Aérodynamique
Ailes (avions)
Avions -- Fuselage
Avions -- Matériaux
Economies d'énergie
Efficacité énergétiqueIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Minix is an innovative wing-tip device for land, sea and air applications that procures a net economic gain of 6% per aircraft in aviation and a 14% average annual increase in power production for wind or submarine turbines. This could be a soon for the owners of wind farms that have reached their end of warranty (usually the fifth year). After a series of tests, a license for the internationally patented invention was sold in the U.S. in july 2012. Note de contenu : - Induced drag
- Nature abhors a vacuum
- How the Minix operates
- Land, sea and air applications
- Pollution
- The Minix device reduces energyPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=18984
in JEC COMPOSITES MAGAZINE > N° 80 (04/2013) . - p. 50-51[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 14975 - Périodique Bibliothèque principale Documentaires Disponible An innovative composite solution for cost-effective primary aircraft structures / Henri Girardy in JEC COMPOSITES MAGAZINE, N° 80 (04/2013)
[article]
Titre : An innovative composite solution for cost-effective primary aircraft structures Type de document : texte imprimé Auteurs : Henri Girardy, Auteur ; Jean-Marc Beraud, Auteur Année de publication : 2013 Article en page(s) : p. 38-40 Langues : Anglais (eng) Catégories : Automatisation
Avions -- Matériaux
Composites à fibres de carbone
Moulage de composites liquidesIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Flying a structure with a mass heavier than air necessitates the use of the lightest possible materials with the highest possible performance-to-mass ratio. Since the early years of aviation, aircraft builders have worked to reduce the weight of their lanes. HiTape, the Hexcel innovative Unidirectional Dry reinforcement is used to build aircraft structures. Note de contenu : - The right material and technology at the right place
- Alternative composite technologies
- HiTape combining current technology advantages with increased cost effectivenessPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=18980
in JEC COMPOSITES MAGAZINE > N° 80 (04/2013) . - p. 38-40[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 14975 - Périodique Bibliothèque principale Documentaires Disponible Application de la théorie Bending-Gradient aux plaques stratifiées / Arthur Lebée in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 22, N° 3 (09-10-11-12/2012)
PermalinkApproach to optimizing a combined out-of-autoclave (OOA) prepreg/liquid composite molding (LCM) process for integrated structures / Claudio di Fratta in SAMPE JOURNAL, Vol. 48, N° 5 (09-10/2012)
PermalinkUne approche cartographique pour l’ingénierie d’aspect des matériaux / Olivier Eterradossi in MATERIAUX & TECHNIQUES, Vol. 98, N° 2 (2010)
PermalinkUne approche numérique rapide pour le suivi du front d'écoulement appliquée à la simulation du moulage par transfert liquide / Aouatif Saad in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 21, N° 2 (05-06-07-08/2011)
PermalinkAutomated placement of inserts in composite sandwich panels / Stefan Kögl in JEC COMPOSITES MAGAZINE, N° 95 (03/2015)
PermalinkAutomobile. Matériaux allégés, mariage compliqué in INDUSTRIE & TECHNOLOGIES, N° 947 (09/2012)
PermalinkAutomobile. Les matériaux biosourcés s'imposent en douceur / Sylvie Latieule in FORMULE VERTE, N° 18 (06/2014)
PermalinkBenchmark d'un modèle pour sandwiches et multicouches, de type layerwise en contrainte / Duc Thaï Nguyen in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 22, N° 3 (09-10-11-12/2012)
PermalinkBenzoxazine components and OoA manufacturing process for aircraft and helicopters / Helder Barros Abreu in JEC COMPOSITES MAGAZINE, N° 96 (04/2015)
PermalinkBraiding a convertible windscreen frame with concave sections / Andreas Kollmannsberger in JEC COMPOSITES MAGAZINE, N° 74 (07-2012)
PermalinkBreaking down the barriers of nesting efficiency in composite cutting / Avner Ben-Bassat in JEC COMPOSITES MAGAZINE, N° 86 (02/2014)
PermalinkCaractérisation mécanique de matériaux élastoplastiques - utilisation d'indenteurs axisymétriques / S. Malherbe in MATERIAUX & TECHNIQUES, Vol. 93, N° 7/8 (2005)
PermalinkCarbon/phenolic nanocomposites for ablative applications / J. S. Tate in SAMPE JOURNAL, Vol. 47, N° 3 (05-06/2011)
PermalinkLes cénosphères / Vladimir Frolov in INDUSTRIE & TECHNOLOGIES, N° 956 (09/2013)
PermalinkPermalinkClean wet-filament winding technology for the production of high-performance composites / Julian Ferries in JEC COMPOSITES MAGAZINE, N° 86 (02/2014)
PermalinkComposite laminate for boat structures in JEC COMPOSITES MAGAZINE, N° 75 (08-09/2012)
PermalinkComposite manufacturing / Avner Ben-Bassat in JEC COMPOSITES MAGAZINE, N° 96 (04/2015)
Permalinkcomposites reinforcement fibers : III - the carbone and graphite families (Part B) / Scott W. Beckwith in SAMPE JOURNAL, Vol. 47, N° 3 (05-06/2011)
PermalinkCompression moulding of hinges for aerospace with recyclable materials / Nicolas Eguémann in JEC COMPOSITES MAGAZINE, N° 80 (04/2013)
PermalinkCorrosion info / Paris : Techniques de l'ingénieur (2004)
PermalinkCorrosion info / Paris : Techniques de l'ingénieur (2005)
PermalinkCost-effective rigid vinyl composites reinforced with long fibres / Claudine Bloyaert in JEC COMPOSITES MAGAZINE, N° 86 (02/2014)
PermalinkCourbes d'indentation et effet d'échelle : quelques cas expérimentaux / Jean-Luc Loubet / 1986
PermalinkDensification de composites carbonés par SPS : utilisation de nanofibres de carbone comme agent liant in MATERIAUX & TECHNIQUES, Vol. 95, N° 4/5 (2007)
PermalinkDevelopment of multi-thickness AS4/PEEK stringers using efficient process / Howell DeWayne in JEC COMPOSITES MAGAZINE, N° 80 (04/2013)
PermalinkDéveloppement et optimisation de préformes tissées 3D-multiaxiales / Ahmad Rashed Labanieh in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 24, N° 1 (01-02-03/2014)
PermalinkDéveloppement de structures composites intelligentes / A. Collaine ; J.-M. Freyburger ; F. Laurent in MATERIAUX & TECHNIQUES, Vol. 97, N° 1 (2009)
PermalinkDiscontinuous LFT composites for structural aerospace applications / Vincent Labatut in JEC COMPOSITES MAGAZINE, N° 96 (04/2015)
PermalinkDe la draisienne aux vélos actuels par l'évolution des matériaux / Philippe Pichat in L'ACTUALITE CHIMIQUE, N° 395 (04/2015)
PermalinkDraping gripper system improves the speed and quality of RTM processing / Mirko Hertrich in JEC COMPOSITES MAGAZINE, N° 110 (01-02/2017)
PermalinkElaboration and characterisation of ZnO thin films / S. Benramache in MATERIAUX & TECHNIQUES, Vol. 100, N° 6/7 (2012)
PermalinkElasticité des empilements granulaires proche de la transition de blocage / Corentin Coulais in MATERIAUX & TECHNIQUES, Vol. 103, N° 3 (2015)
PermalinkL'essentiel de mécanique / Pascal Lussiez / Malakoff : Dunod (2018)
PermalinkEtude de cas sur le renforcememnt d'ouvrage par matériaux composites / Didier Germain in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 22, N° 2 (05-06-07-08/2012)
PermalinkÉtude du comportement en vibration transversale des plaques composites multicouches antisymétriques / L. Bouyaya in MATERIAUX & TECHNIQUES, Vol. 99, N° 4 (2011)
PermalinkÉtude des propriétés physico-chimiques, thermiques et mécaniques des fibres d’alfa / Dalila Hammiche in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 25, N° 1 (01-02-03/2015)
PermalinkEvaluation de la dispersion des propriétés mécaniques d'un matériau composite par sous-échantillonnage / Pierre Pineau in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 22, N° 3 (09-10-11-12/2012)
PermalinkExtension of the Bending-Gradient theory to thick plates buckling: application to Cross Laminated Timber walls / Olivier Perret in MATERIAUX & TECHNIQUES, Vol. 104, N° 4 (2016)
PermalinkLa fabrication additive et les matériaux / Ariana Fuga in MATERIAUX & TECHNIQUES, Vol. 102, N° 2 (2014)
PermalinkFace-sheet analysis ant thermo-physical property characterization of OOA and autoclave panels / S. G. Miller in SAMPE JOURNAL, Vol. 48, N° 5 (09-10/2012)
PermalinkFPP technology : industrial end-to-end automation for complex preforms in JEC COMPOSITES MAGAZINE, N° 109 (11-12/2016)
PermalinkFree design tools with unmatched easy, speed and sophistication / Stephen W. Tsai in JEC COMPOSITES MAGAZINE, N° 71 (03/2012)
PermalinkFrom fibre to façade / Danny Wilms Floet in JEC COMPOSITES MAGAZINE, N° 74 (07-2012)
PermalinkFrom inception to insertion : successful products and applications using nickel nanostrands / Nathan Hansen in SAMPE JOURNAL, Vol. 47, N° 3 (05-06/2011)
Permalink