Accueil
Catégories
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
Plastiques. Méthodes d'essai pour la détermination des effets de l'immersion dans des produits chimiques liquides - Norme NF EN ISO 175 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2000)
Titre de série : Plastiques Titre : Méthodes d'essai pour la détermination des effets de l'immersion dans des produits chimiques liquides - Norme NF EN ISO 175 Type de document : texte imprimé Auteurs : Association Française de Normalisation (Paris) , Auteur Editeur : Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) Année de publication : 2000 Importance : 21 p. Présentation : ill. Format : 30 cm Note générale : Annexes - Bibliogr. Langues : Français (fre) Catégories : Eau
Essais (technologie) -- Normes
Liquides (Chimie)
Matières plastiques -- Analyse
Matières plastiques -- Normes
Produits chimiques
Test d'immersionIndex. décimale : 668.4 Plastiques, vinyles Résumé : Le présent document prescrit une méthode d'exposition d'éprouvettes en plastique exemptes de toute contrainte extérieure, à des agents chimiques liquides, ainsi que des méthodes de détermination des variations de caractéristiques, résultant d'une telle exposition. Indice de classement : T 51-029 Classification ICS : 83.080.01 Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=17661 Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 14750 T 51-029 Norme Bibliothèque principale Documentaires Disponible Plastiques renforcés de verre textile. Traitement à l'eau chaude en vue de la mesure de l'évolution des caractéristiques - Norme NF T 57-107 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1986)
Titre de série : Plastiques renforcés de verre textile Titre : Traitement à l'eau chaude en vue de la mesure de l'évolution des caractéristiques - Norme NF T 57-107 Type de document : texte imprimé Auteurs : Association Française de Normalisation (Paris) , Auteur Editeur : Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) Année de publication : 1986 Importance : 4 p. Format : 30 cm Catégories : Composites à fibres de verre -- Normes
Eau chaude
Essais (technologie) -- Normes
Essais dynamiques
Matières plastiques -- Normes
Mesure
Renforts textiles
Test d'immersionIndex. décimale : 668.4 Plastiques, vinyles Résumé : Cette norme permet de préjuger du comportement à long terme des plastiques renforcés de verre, dans des conditions préalablement fixées, mais n'apporte pas forcément de corrélation avec un vieillissement naturel. Elle a été jugée cependant intéressante pour différentes applications de ces produits. Indice de classement : T 57-107 Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=19075 Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 15439 T 57-107 Norme Bibliothèque principale Documentaires Disponible A polyurethane coating using CoMOF-BTA metal-organic framework for active protection of AA2024-T3 / Izuchukwu K. Nwokolo in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 21, N° 2 (03/2024)
[article]
Titre : A polyurethane coating using CoMOF-BTA metal-organic framework for active protection of AA2024-T3 Type de document : texte imprimé Auteurs : Izuchukwu K. Nwokolo, Auteur ; Hongwei Shi, Auteur ; Alexander I. Ikeuba, Auteur ; Wanyu Zhang, Auteur ; Fuchun Liu, Auteur ; En-Hou Han, Auteur Année de publication : 2024 Article en page(s) : p. 521-535 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Aluminium -- Alliages
Anticorrosifs
Anticorrosion
Caractérisation
Electrochimie
Essais d'adhésion
Essais de brouillard salin
Polyuréthanes
Revêtements organiques
Test d'immersionIndex. décimale : 667.9 Revêtements et enduits Résumé : CoMOF-BTA, a new metal-organic framework with inherent corrosion inhibition ability was prepared via a one-step solvothermal process and characterized using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and thermal analyses. Immersion and polarization tests were conducted to evaluate the ability of CoMOF-BTA to resist corrosion on AA2024-T3 alloy in NaCl solution. In addition, CoMOF-BTA particles were incorporated into polyurethane coatings to produce active anti-corrosion coatings, whose corrosion protection capabilities were assessed using electrochemical methods and salt spray analysis. The impedance results show that polyurethane coatings containing CoMOF-BTA have coating resistances (Rcoat) that are around two orders of magnitude higher than that without the CoMOF-BTA particles. The salt spray analysis also indicates the corrosion protection ability of coatings containing CoMOF-BTA particles after a long period of exposure. The results demonstrate that CoMOF-BTA improved the ability of AA2024-T3 to resist corrosion and confirm the anti-corrosion properties of CoMOF-BTA-laden coatings by the controlled release of BTA molecules in NaCl solution. This study offers a new anti-corrosion MOF material and active coating for the protection of aluminum alloys against corrosion. Note de contenu : - MATERIALS AND METHODS : Material - Synthesis of CoMOF-BTA - Characterization - Immersion tests on bare sample - Electrochemical tests - Adhesion test - Salt spray experiment
- RESULTS AND DISCUSSION : Characterization - Corrosion resistance of CoMOF-BTA on AA2024-T3 - Effects of CoMOF-BTA on polyurethane coating
- Table 1 : Chemical composition of Aluminum alloy 2024-T3 in wt.%
- Table 2 : Fitting results of polarization curves of the bare AA2024-T3 samples immersed in 3.5 wt.% NaCl and the extract solution of 2 wt. % CoMOF-BTA at 298 KDOI : https://doi.org/10.1007/s11998-023-00835-x En ligne : https://link.springer.com/content/pdf/10.1007/s11998-023-00835-x.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=40774
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 21, N° 2 (03/2024) . - p. 521-535[article]Polyurethane urea dispersions with better balance of properties / Monica Fuensanta in EUROPEAN COATINGS JOURNAL (ECJ), N° 2 (02/2019)
[article]
Titre : Polyurethane urea dispersions with better balance of properties : Polyester and polycarbonate soft segments enhance crystallinity, viscoelasticity, ageing and hydrolytic resistance of PUU films Type de document : texte imprimé Auteurs : Monica Fuensanta, Auteur ; José Miguel Martin-Martinez, Auteur ; Francisco Rodriguez-Llansola, Auteur ; Victor Costa, Auteur ; Manuel Colera, Auteur Année de publication : 2019 Article en page(s) : p. 108-115 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Adhésion
Caoutchouc styrène-butadiène
Copolymère uréthane-urée
Copolymères -- Synthèse
Essais de pelage
Polycarbonates
Polyesters
Résistance à l'hydrolyse
Revêtements en phase aqueuse
Test d'immersion
Thermogravimétrie
ViscoélasticitéIndex. décimale : 667.9 Revêtements et enduits Résumé : Environmental regulations are driving the rapid growth of water-borne polyurethane urea dispersions (WPUUs) have good film-forming abilities at low temperatures and the resulting polyurethane urea (PUU) coatings show high flexibility, good chemical resistance and good adhesion to various substrates. Note de contenu : - Preparatory work
- Characterisation of PUU films containing polyester and polycarbonate soft segments
- Adhesion before and after accelerated ageing of joints made with W)PAD+PCD) and WPAD°WPCD dispersions
- Ageing of PUU films containing polyester and polycarbonate soft segments
- Fig. 1 : General scheme of the synthesis procedure of WPUUs and PUUs made with mixture of polyols
- Fig. 2a : Variation of derivative of the weight as function of temperature for FPad and FPCD films
- Fig. 2b : Variation of derivative of the weight as function of temperature for films made with mixtures of polyols and with WPad+WPCD blends
- Fig. 3 : X-ray diffractograms of FPad and FPCD films
- Fig. 4a : Variation of storage modulus (G') as function of temperature for FPad and FPCD films
- Fig. 4b : Variation of storage modulus (G') as a function of temperature for PUUs made with mixtures of polyols and with WPad+WPCD blends
- Fig. 5 : T-peel strength of surface treated vulcanized SBR rubber/WPUU+5 wt% hardener/roughned leather joints as a function of the immersion time in water at 70°C. Locus of failure : CS, cohesive failure of the rubber ; CA, cohesive failure of the adhesive ; M, mixed failure (CS°CA)
- Fig. 6 : Photos of PUU films after immersion in water at 70°C for 3 days
- Fig. 7 : ATR-IR spectra of FPad and FPCD films before and after immersion in water at 70°C for 3 days
- Fig. 8 : Variation of derivative of the weight as a function of temperature for FPad and FPCD films before and after immersion in water at 70°C for 3 days. TGA experimentsEn ligne : https://drive.google.com/file/d/1ai4tQ4v1i_caWcS5wljcTjwGAg1id-ji/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=31687
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 2 (02/2019) . - p. 108-115[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 20597 - Périodique Bibliothèque principale Documentaires Disponible Practical in-plant evaluation of two FBE abrasion-resistant overcoat systems / Emre Aksu in JOURNAL OF PROTECTIVE COATINGS & LININGS (JPCL), Vol. 33, N° 7 (07/2016)
[article]
Titre : Practical in-plant evaluation of two FBE abrasion-resistant overcoat systems Type de document : texte imprimé Auteurs : Emre Aksu, Auteur ; Alan Kehr, Auteur ; Matt Dabiri, Auteur Année de publication : 2016 Article en page(s) : p. 22-29 Langues : Américain (ame) Catégories : Adhésion
Anticorrosion
Eau chaude
Epoxydes
Essais de résilience
Essais dynamiques
Porosité
Qualité -- Contrôle
Résistance à l'abrasion
Résistance à la fusion
Revêtement époxy lié par fusion
Revêtements -- Propriétés mécaniques
Revêtements multicouches
Revêtements protecteurs
Souplesse (mécanique)
Test d'immersion
Tuyauterie
Tuyauterie -- ProtectionIndex. décimale : 667.9 Revêtements et enduits Résumé : In this article, the authors illustrate a comparison between a new flexible version of an abrasion-resistant overcoat (ARO) coating system and two ARO coatings at a total thickness of 20 mils, two single-layer fusion-bonded epoxy (FBE) coatings, and two dual-layer FBE (2LFBE) systems at a thickness of 60 mils. Note de contenu : - Coating process
- Thickness of evaluated systems
- The cathodic disbondment test (CDT) : Short-term cathodic disbondment testing - Long-term cathodic disbondment testing - Flexibility
- Hot-water soak adhesion (HWS)
- Porosity
- FIGURES : 1. For this set of tests, a profilometer measured a peak to valley height of 70-to-100 µm (~3 – 4 mil) and an average peak count of 41/cm (104/in) - 2. Both the short- and long-term CD tests were conducted at 65 C (150 F), -3.5 V (calomel reference electrode) and a 3-percent NaCl electrolyte - 3. Short-term cathodic disbondment results - 4. Long-term cathodic disbondment results - 5. A crack on a bended sample under 40 times magnification. Any coating crack seen at 40 times magnification constituted a failure - 6. While the flexible ARO layer showed a low level of porosity, almost none was seen in the remaining samples for either layer - 7. Average passing impact resistance results
- TABLES : 1. Different coating thickness systems for the tests - 2. Average flexibility results for different mandrels - 3. Average hot water soak adhesion results - 4. Average porosity ratings of coating layers - 5. Test averages according to coating typeEn ligne : http://www.paintsquare.com/archive/?fuseaction=view&articleid=5867 Format de la ressource électronique : Web Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=28418
in JOURNAL OF PROTECTIVE COATINGS & LININGS (JPCL) > Vol. 33, N° 7 (07/2016) . - p. 22-29[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 18240 - Périodique Bibliothèque principale Documentaires Disponible Primed for VOC reduction / Marie Josée Déry-Chauvette in EUROPEAN COATINGS JOURNAL (ECJ), N° 7-8 (07-08/2017)
PermalinkRheological and adhesive properties of soft responsive hydrogels in aqueous media / M. Vahdati in RHEOLOGIE, Vol. 38 (12/2020)
PermalinkRheological and thermal characterization of polymer coatings : a case study / Menas S. Vratsanos in COATINGS TECH, Vol. 14, N° 7 (07/2017)
PermalinkSelf-healing hybrid coating of phytic acid/silane for improving the corrosion resistance of magnesium alloy / Yan Li in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 15, N° 3 (05/2018)
PermalinkSilane coupling agent (SCA) pretreatment and polycaprolactone (PCL) coating for enhanced corrosion resistance for magnesium / Jialin Niu in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 16, N° 1 (01/2019)
PermalinkSkin oxygen tension is improved by immersion in oxygen-enriched water / Stacey Allan Reading in INTERNATIONAL JOURNAL OF COSMETIC SCIENCE, Vol. 35, N° 6 (12/2013)
PermalinkSolvent-free rigid 2K polyurethanes for protective coatings / Matthias Wintermantel in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 204, N° 4592 (01/2014)
PermalinkPermalinkSurfactant concepts redesigned / Silfredo Javier Bohorquez in EUROPEAN COATINGS JOURNAL (ECJ), N° 9 (09/2017)
PermalinkSustainable microcapsules for self-healing and corrosion protection in powder coatings / Vimal Saimi in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 210, N° 4661 (05/2020)
PermalinkTextiles. Tests for colour fastness - Part E01 : Colour fastness to water - Norme NF EN ISO 105-E01 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2013)
PermalinkThe effect of glass transition temperature of commercial epoxy-amine coatings on their performance in marine environment / Muhammad Ahsan Bashir ; Heng Li ; Vivian B. Farstad in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 20, N° 3 (05/2023)
PermalinkUtilisation of waste plaintain (Musa paradisiaca) peels and waste polystyrene in the development of reinforced polymer composites / Adewale George Adeniyi in INTERNATIONAL POLYMER PROCESSING, Vol. XXXV, N° 3 (07/2020)
PermalinkWater permeation and corrosion resistance of single- and two-component hydrophobic polysiloxane barrier coatings / X. Sun in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 14, N° 6 (11/2017)
PermalinkWater vapor transmission properties of acrylic organic coatings / Réka Lilla Kovács in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 18, N° 2 (03/2021)
Permalink