Accueil
Catégories
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
[article]
Titre : Beat the heat : New challenges for curing material on heat-sensitive substrates Type de document : texte imprimé Auteurs : N. Julian K. Danvers, Auteur Année de publication : 2002 Article en page(s) : p. s4-s7 Langues : Américain (ame) Catégories : Adhésifs -- Séchage sous rayonnement électronique
Adhésifs -- Séchage sous rayonnement ultraviolet
Coût de production
Entretien et réparations
Micro-ondes
Réticulation (polymérisation)Index. décimale : 668.3 Adhésifs et produits semblables Résumé : While the lamp head in itself is the primary generator for the heat, this article has tried to demonstrate the factors and technology available in this area to deal with this issue. The exact system used depends on the type and scale of application. Microwave technology has particular advantage in powder, fiber optic, hard coat and plastic component applications. A water-filtered lamp here is better suited to webstyle processes.
There is a significant overlap between the suitability of UV sources for different applications. Some of the processes involved can be complex. For example, when curing a coating onto pine, heat is a major issue due to sap rising from the wood and damaging the coating. A recent case has seen electrode technology removed in favor of the lower heat and high intensities associated with microwave.
With a three-dimensional object, the short length on a microwave system becomes a major advantage when trying to cover the whole surface with an even UV dose. Automotive headlights generally use a three-lamp arrangement to achieve this result.
When dealing with large sheets or webs, a water-cooled or filtered system becomes more advantageous due to the continuous span. For example, the printing of a bank note onto either paper or plastic will use this style technology. The choice of lamp head is a complex issue and the factors affecting the design chosen are not straightforward as it is in a trade-off situation. What I have aimed to do is highlight the area that needs to be considered to enable the reader to better judge the situation.Note de contenu : - Reflector Technologies
- Focus, UV Intensity & Aspect Ratio
- Operational Differences
- Maintenance & Operating CostsEn ligne : https://drive.google.com/file/d/1RXonadhnfSTnMruk10x7emcXrqshSXP3/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=19992
in ADHESIVES AGE > Vol. 45, N° 3 (03/2002) . - p. s4-s7[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 001469 - Périodique Bibliothèque principale Documentaires Disponible Being competitive with large scale staple fiber production lines - a customer case study in CHEMICAL FIBERS INTERNATIONAL, Vol. 62, N° 2 (05/2012)
[article]
Titre : Being competitive with large scale staple fiber production lines - a customer case study Type de document : texte imprimé Année de publication : 2012 Article en page(s) : p. 98-99 Langues : Anglais (eng) Catégories : Coût -- Contrôle
Coût de production
Production -- Gestion
Textiles et tissus -- IndustrieIndex. décimale : 677 Textiles Résumé : With the switch from the small lines of 100 tons/day each to one 300 ton/ day line for staple fiber production, a leading producer in Asia has reduced its production costs by 25-30 %. A solid track record of manufacturing high capacity staple fiber lines and experience in customized engineering solutions, were the factors to partner with Oerlikon Neumag. The strong cooperation as a team between both parties made a successful solution possible within a limited building space and tight schedule. This cooperation is an example of how a long term partnership evolves. En ligne : https://drive.google.com/file/d/14fG-wGMmXTNW9tf48-TSFlb4ZWXLYPSz/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=15861
in CHEMICAL FIBERS INTERNATIONAL > Vol. 62, N° 2 (05/2012) . - p. 98-99[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 13959 - Périodique Bibliothèque principale Documentaires Disponible Being competitive with large scale staple fiber production lines - a customer case study / Christina Mallin in CHEMICAL FIBERS INTERNATIONAL, (10/2012)
[article]
Titre : Being competitive with large scale staple fiber production lines - a customer case study Type de document : texte imprimé Auteurs : Christina Mallin, Auteur Année de publication : 2012 Article en page(s) : p. 63-64 Langues : Anglais (eng) Catégories : Coût -- Contrôle
Coût de production
Production -- Gestion
Textiles et tissus -- IndustrieIndex. décimale : 677 Textiles Résumé : With the switch from the small lines of 100 tons/day each to one 300 ton/ day line for staple fiber production, a leading producer in Asia has reduced its production costs by 25-30 %. A solid track record of manufacturing high capacity staple fiber lines and experience in customized engineering solutions, were the factors to partner with Oerlikon Neumag. The strong cooperation as a team between both parties made a successful solution possible within a limited building space and tight schedule. This cooperation is an example of how a long term partnership evolves. En ligne : https://drive.google.com/file/d/1DmGV1zExsmQ1frkBsnJ3XMheeq3x3JoU/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=16340
in CHEMICAL FIBERS INTERNATIONAL > (10/2012) . - p. 63-64[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 14248 - Périodique Bibliothèque principale Documentaires Disponible Better pelletization under water / Jürgen Bartl in KUNSTSTOFFE INTERNATIONAL, Vol. 106, N° 9 (09/2016)
[article]
Titre : Better pelletization under water : Die plate wear protection doubles service life Type de document : texte imprimé Auteurs : Jürgen Bartl, Auteur Année de publication : 2016 Article en page(s) : p. 102-104 Langues : Anglais (eng) Catégories : Coût -- Contrôle
Coût de production
Durée de vie (Ingénierie)
Granulateurs
Granulation
PolyoléfinesUne polyoléfine, parfois appelée polyalcène, désigne un polymère aliphatique saturé, synthétique, issu de la polymérisation d'une oléfine (aussi appelée un alcène) telle l'éthylène et ses dérivés.
La formule générale est -(CH2-CRR')n-, où R et R' peuvent être l'atome d'hydrogène (H) ou les radicaux alkyle apolaires CH3, CH2-CH3, CH2-CH(CH3)2. Il existe aussi des mousses isolantes souples faites à partir de polyoléfine (pour l'isolation thermique de tuyaux plastiques par exemple).
PRESENTATION : Les polyoléfines forment la plus importante famille de matières plastiques, avec quatre représentants (PP, HDPE, LDPE, LLDPE) parmi les plastiques de grande consommation. La consommation mondiale de ces quatre polymères est évaluée à plus de 60 millions de tonnes en 20001.
Seul un petit nombre de polyoléfines a atteint le niveau industriel :
les polyoléfines thermoplastiques semi-cristallines : polyéthylène (PE), polypropylène (PP), polyméthylpentène (PMP), polybutène-1 (PB-1) ;
les polyoléfines élastomères : polyisobutylène (PIB), éthylène-propylène (EPR ou EPM) et éthylène-propylène-diène monomère (EPDM).
PROPRIETES : En raison de leur nature paraffinique, les polyoléfines sont hydrophobes et possèdent en général une grande inertie chimique (aux solvants, acides, bases, etc.). Ces matériaux ont donc une qualité alimentaire. Le collage est très difficile (la surface est particulièrement inerte, des traitements de surface spéciaux sont nécessaires).
Cependant, ils sont sensibles à l'action des UV, et résistent très peu à l'inflammation car leur indice limite d'oxygène est faible (exemple : ILO ~ 17 pour le polyéthylène).
Leur densité est très faible [0,83 (cas du PMP) < d < 0,95] : ils flottent dans l'eau.
Ils sont opaques, sauf le PMP (transparent).Index. décimale : 668.4 Plastiques, vinyles Résumé : A new development in wear prevention on underwater pelletizer die plates is opening up the way to significant reductions in production costs, in particular for the production of polyolefins. This new wear protection is now available for the first time for the die plate of an increased capacity underwater pelletizer for throughputs of up to 70 t/h. Note de contenu : - Properties of common wear prevention materials
- High resistance to wear and corrosion
- Prototype proves and exceeds expectations
- First application for medium-capacity
- FIGURES : 1. The current upper limits of feasibilities : The UG1250 pelletizer is designed for throughputs of up to 120t/h - 2. Wear resistance under practical conditions, the wear resistance of the newly developed NikroDur alloy is up to twice that of the previous standard grade Nikro128, which is likewise based on ferro-titanite (50% demonstrated by pin-on-paper wear test) - 3. Weight loss and corrosion rate : The corrosion resistance of the newly developed NikroDur alloy is up to one third than that of the existing standard grade - 4. The thermal conductivity of the newly developed alloy is 20% lower than that of the Nikrol128 - 5. Optimized arrangement : The large die plate of the UG750W has a larger number of die holes, so enabling an increased output capacity in comparison with the UG750En ligne : https://drive.google.com/file/d/1hBYnbpSOHr_ud7TEhkn90yl1uP13y2CN/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=28048
in KUNSTSTOFFE INTERNATIONAL > Vol. 106, N° 9 (09/2016) . - p. 102-104[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 18341 - Périodique Bibliothèque principale Documentaires Disponible Budgets, écarts et analyse de la performance / Michel Coucoureux / Paris : Nathan (2011)
Titre : Budgets, écarts et analyse de la performance Type de document : texte imprimé Auteurs : Michel Coucoureux, Auteur ; Thierry Cuyaubère, Auteur Editeur : Paris : Nathan Année de publication : 2011 Collection : Nathan Sup, ISSN 0985-9985 Importance : 255 p. Présentation : ill. Format : 24 cm ISBN/ISSN/EAN : 978-2-09-161776-3 Prix : 19,90 E Note générale : Exercices avec corrigés - Index Langues : Français (fre) Catégories : Analyse financière
Analyse financière -- Problèmes et exercices
Contrôle de gestion
Contrôle de gestion -- Problèmes et exercices
Coût de production
Gestion budgétaire
Gestion budgétaire -- Problèmes et exercicesIndex. décimale : 658.15 Gestion financière, capital, investissements, budget Résumé : A partir d'un cours clair et structuré, illustré par de nombreux exemples et accompagné d'applications corrigées, ce deuxième ouvrage consacré au contrôle de gestion :
- répertorie et analyse les différents budgets élaborés au sein des entreprises ;
- étudie les outils de mesure et d'amélioration de la performance (écarts, analyse de la valeur, coût cible ...).Note de contenu : 1. Objectif de la gestion budgétaire
2. Les coûts préétablis
3. L'analyse des écarts sur coûts de production
4. La prévision des ventes
5. Budgets et gestion commerciale
6. Budgets et gestion de la production
7. Budgets et gestion des achats et des stocks
8. La synthèse budgétaire
9. Valeur et coût de la cible
10. La performance : outils et stratégies
11. La responsabilisation des acteursPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=12696 Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 3092 658.15 COU Monographie Bibliothèque principale Documentaires Disponible Can flax replace E-glass in small wind turbine blades ? / Darshil U. Shah in JEC COMPOSITES MAGAZINE, N° 78 (01-02/2013)
PermalinkCarbon fiber development : from polyethylene-based precursors to carbon fibers / Andreas de Palmenaer in CHEMICAL FIBERS INTERNATIONAL, (10/2018)
PermalinkPermalinkConception des pièces injectées en dix chapitres / Jürgen Hasenauer in CAOUTCHOUCS & PLASTIQUES, N° 778 (06-07/1999)
PermalinkConsolidation jet d'eau / Jurgen Heller in L'INDUSTRIE TEXTILE, N° 1336 (11/2001)
PermalinkConsumables or reusable: a case for a more economic and ecological approach / Alan Harper in JEC COMPOSITES MAGAZINE, N° 67 (08-09/2011)
PermalinkCost-effective, fully automated powder coating / J. Wagner in INTERNATIONAL SURFACE TECHNOLOGY (IST), Vol. 11, N° 3 (2018)
PermalinkCost modelling of composite structure / Mathilda Karlsson Hagnell in JEC COMPOSITES MAGAZINE, N° 96 (04/2015)
PermalinkPermalinkDevelopment of low cost degradable polyester fibers / C. C. Lam in CHEMICAL FIBERS INTERNATIONAL, (09/2016)
PermalinkÉlaboration d’un guide de choix de solvants durables / Didier Mariotte in L'ACTUALITE CHIMIQUE, N° 427-428 (03-04/2018)
PermalinkEnergy-efficient production of hydroentangled nonwovens / Joachim Binnig in CHEMICAL FIBERS INTERNATIONAL, Vol. 67, N° 2 (06/2017)
PermalinkPermalinkEvolution and harmonization of aerospace prepregs in JEC COMPOSITES MAGAZINE, N° 89 (05/2014)
PermalinkFabrication à bas coût de biocomposites structuraux / Chung-Hae Park in PLASTIQUES & CAOUTCHOUCS MAGAZINE, N° 937 (03/2017)
PermalinkFacing increasing production costs for inks or coatings ? / Daniel Troxler in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 204, N° 4598 (07/2014)
PermalinkGestion simultanée des coûts et de la qualité en conception : apports et limites du QFD / Frédéric Gauthier in REVUE FRANCAISE DE GESTION INDUSTRIELLE, Vol. 30, N° 4 (12/2011)
PermalinkGlass fibre reinforcement type significantly impacts FRP corrosion performance / Matt Lieser in JEC COMPOSITES MAGAZINE, N° 69 (11-12/2011)
PermalinkGreater transparency / Bernd Elbert in KUNSTSTOFFE INTERNATIONAL, Vol. 103, N° 2 (02/2013)
PermalinkHolistic quality approach for autoclave-injection composite manufacturing / Erik Kappel in JEC COMPOSITES MAGAZINE, N° 96 (04/2015)
PermalinkPermalinkHybrid structures for tailored structural automotive components / Christian Lauter in JEC COMPOSITES MAGAZINE, N° 69 (11-12/2011)
PermalinkPermalinkIntegrated approach reduces production costs / Michael Topp in INTERNATIONAL SURFACE TECHNOLOGY (IST), Vol. 12, N° 1 (2019)
PermalinkIt pays to put more into development / Gerhard Jell in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 10 (10/2012)
PermalinkA knowledge management system for injection molds / Maximilian Hirner in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 7 (07/2012)
PermalinkLight-curable opportunities / Virginia Read in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 17, N° 7 (07/2010)
PermalinkLower pressure in the RTM-process / Wolfgang Raffelt in KUNSTSTOFFE INTERNATIONAL, Vol. 104, N° 9 (09/2014)
PermalinkMaîtriser les coûts et les performances cachés / Henri Savall / Paris : Economica (1989)
PermalinkPermalinkNew fast-curing, two-component, ultra-high-solid paint / Claudia Hetmank in INTERNATIONAL SURFACE TECHNOLOGY (IST), Vol. 10, N° 2 (2017)
PermalinkA new platform for producing Class A surface quality components / Friedrich Lars in JEC COMPOSITES MAGAZINE, N° 121 (05-06/2018)
PermalinkNext generation high-performance polymeric grinding resins for architectural coatings / Thomas Schoenbacher in PAINTINDIA, Vol. LXIV, N° 4 (04/2014)
PermalinkOne-step dyeing of polyethylene terephthalate fabric, combining pretreatment and dyeing using alkali-stable disperse dyes / Aiqin Hou in COLORATION TECHNOLOGY, Vol. 129, N° 6 (12/2013)
PermalinkPermalinkPhénomènes d'oxydation : comment les combattre in PARFUMS COSMETIQUES ACTUALITES, N° 137 (11/1997)
PermalinkPresent and future of basalt fibre technology manufacturing and market development / Sergii Osnos in JEC COMPOSITES MAGAZINE, N° 108 (10/2016)
PermalinkProcessing of polymer matrix composites / P. K. Mallick / Boca Raton [Etats-Unis] : CRC Press - Taylor Francis Group (2018)
PermalinkPultrusion and resin film infusion (RFI) of bi-angle thin-ply NCF / Valentin Neacsu in JEC COMPOSITES MAGAZINE, N° 68 (10/2011)
PermalinkPermalinkLes règles d'or pour établir votre devis / J. -M. Maucotel in CAOUTCHOUCS & PLASTIQUES, N° 759 (05/1997)
PermalinkRight-sizing your materials / Jim Enochs in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 19, N° 5 (05/2012)
PermalinkRolling stock : weight reduction pays off / Philipp Angst in JEC COMPOSITES MAGAZINE, N° 69 (11-12/2011)
PermalinkSelecting optimal molding and material conditions of reinforced polymeric nanocomposites with MWCNT using a multi-criteria decision making model / T. Azdast in INTERNATIONAL POLYMER PROCESSING, Vol. XXXIII, N° 5 (11/2018)
PermalinkSemi-finished fabrics to order / Gerd Rauenbusch in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 9 (09/2012)
PermalinkA study on cost accounting in garment leather manufacturing / E. Yigit in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 90, N° 2 (03-04/2006)
PermalinkTwo colors in one die / Oliver Te Heesen in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 4 (04/2012)
PermalinkUsing LCA to select coatings for optimum environmental and cost performance / Nick J. Hazel in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 68, N° 861 (10/1996)
PermalinkVers la réduction des dépenses d'énergie / Clément Delorme in DOUBLE LIAISON, N° 596 (01/2014)
Permalink