Accueil
Catégories
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
A facile process for fabrication of environmentally safe superhydrophobic surfaces / Tanu Mittal in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 14, N° 6 (11/2017)
[article]
Titre : A facile process for fabrication of environmentally safe superhydrophobic surfaces Type de document : texte imprimé Auteurs : Tanu Mittal, Auteur ; Sangeeta Tiwari, Auteur ; S. K. Tiwari, Auteur Année de publication : 2017 Article en page(s) : p. 1289-1295 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Dioxyde de silicium
Dip-coating
Fluoropolymères
Hydrophobie
Revêtement auto-nettoyant
Revêtements multicouches
Sol-gel, Procédé
Verre -- RevêtementsIndex. décimale : 667.9 Revêtements et enduits Résumé : Superhydrophobic coatings have opened new vistas in the field of self-cleaning surfaces by having improved performance, robustness and preservation of cleaning agents including water. Presently, fluoropolymers are extensively explored and used for this purpose. However, the major drawback accompanying fluoropolymers is formation of environmentally persistent and toxic compounds, viz. PFOA (perfluorooctanoic acid) and PFOS (perfluorooctanesulfonic acid) on their degradation raising concern on their use. In the present study, an effort has been made to develop a facile process by using an environmentally safe material. A simple dip coating technique is reported to fabricate superhydrophobic surface. SiO2 nanoparticles of size 25–30 nm, prepared by sol–gel route, were dip-coated on glass substrate in multilayers followed by coating of a surfactant to achieve homogeneity of SiO2 layers and enhanced binding with subsequent layer of NUVA-2114 [a commercially used fluorotelomer with chemical composition C2F6(CF2CF2)nX]. It was observed that SiO2 nanoparticles and sodium dodecyl sulfate (SDS) surfactant exhibit a synergistic effect on interface stability at optimized SDS concentration. A water contact angle of 152° is achieved. The established method is simple, scalable, environmentally safe and cost-effective. Note de contenu : - EXPERIMENTAL : Materials - Preparation of SiO2 NPs by sol–gel route - Deposition of SiO2 NPs on glass substrate - Deposition of SDS and NUVA 2114 layers over SiO2 NPs - Characterization
- RESULTS AND DISCUSSION : Particle size and morphology of SiO2 NPs - SiO2 NPs deposition on glass substrate - Role of SDS in stabilization of interfaces between various layers
- CONTACT ANGLE AND AFM ANALYSIS
- OPTICAL CHARACTERIZATION
DOI : 10.1007/s11998-017-9927-4 En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-017-9927-4.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=29629
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 14, N° 6 (11/2017) . - p. 1289-1295[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 19441 - Périodique Bibliothèque principale Documentaires Disponible Facile synthesis of fluorine-free, hydrophobic, and highly transparent coatings for self-cleaning applications / Abderrahmane Hamdi in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 18, N° 3 (05/2021)
[article]
Titre : Facile synthesis of fluorine-free, hydrophobic, and highly transparent coatings for self-cleaning applications Type de document : texte imprimé Auteurs : Abderrahmane Hamdi, Auteur ; Julie Chalon, Auteur ; Pascal Laurent, Auteur ; Benoit Dodlin, Auteur ; Elhadj Dogheche, Auteur ; Philippe Champagne, Auteur Année de publication : 2021 Article en page(s) : p. 807-818 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Angle de contact
Caractérisation
Dip-coating
Essais (technologie)
Essais de résilience
HexaméthyldisiloxaneL'hexaméthyldisiloxane ou HMDS est un composé organique de formule semi-développée O[Si(CH3)3]2. C'est un liquide incolore et volatil qui est utilisé comme solvant et réactif. Il est issu de l'hydrolyse du chlorure de triméthylsilyle. Cette molécule est un prototype d'un éther silylique et peut être considérée comme une sous-unité du polydiméthylsiloxane. L'hexaméthyldisiloxane est principalement utilisé comme source du groupe fonctionnel triméthylsilyle, -Si(CH3)3 en synthèse organique. Par exemple, sous catalyse acide, il convertit les alcools et les acides carboxyliques en leur éther et ester triméthylsilyliques correspondants.
Le HMDS est utilisé comme un étalon interne pour calibrer les déplacements chimiques en spectroscopie NMR 1H. Il est plus facile à manipuler car moins volatil que le tétraméthylsilane qui est l'étalon habituel et n'affiche aussi qu'un singulet proche de 0 ppm.
Le HMDS a un pouvoir de solvatation encore plus bas que celui d'alcanes. Il est donc parfois employé pour cristalliser des composés très lipophiles.
Hydrophobie
Revêtement auto-nettoyant
Revêtements organiques
Sol-gel, Procédé
Tétraéthoxysilane
Transparence (optique)Index. décimale : 667.9 Revêtements et enduits Résumé : Non-fluorinated coatings have recently emerged as a new approach to avoid contamination on transparent surfaces. This research work concerns the synthesis of highly transparent, hydrophobic, durable, and self-cleaning coatings as an alternative to fluorine-based coatings used on glass. The developed coating is produced by a chemical route (sol–gel method) using two silica-based precursors, hexamethyldisilazane, and tetraethoxysilane (HMDS/TEOS). Then, the prepared Gel HMDS/TEOS was deposited on glass slides by the dip-coating technique. Afterward, the effects of mechanical durability, water-drop testing, thermal cycling testing, and aging times on the hydrophobicity of the gel were analyzed. The properties of the coating were characterized by optical microscopy, scanning electron microscopy, UV–VIS-NIR spectrophotometry, and contact angle measurement. The results show that the organic modification of the gel by trimethylsilyl (–Si–(CH3)3) groups leads to a homogeneous and a hydrophobic surface. Sufficient dilution of this gel with ethanol has been found to provide a highly transparent coating without losing its hydrophobic property. In addition, the robust and durable coating exhibits high self-cleaning performance suitable for various industrial applications. Note de contenu : - MATERIALS AND METHODS : Materials - Experimental section - Synthesis of hydrophobic silica sol–gel modified with HMDS - Coating characterization - Optical microscopy - Optical transparency - Water contact angle (WCA) measurements - Fourier transform infrared (FTIR) - Sandpaper test - Water-drop impact test - Thermal cycling test
- RESULTS AND DISCUSSION : Reaction mechanism - Optical characterizations - Sandpaper abrasion test - Water-drop impact test - Thermal cycling test - Aging time - Non-stick and self-cleaning test
- Table : Contact angle (CA) and sliding angle (SA) of water and Schneider’s Insect Medium on untreated glass slide and the Gel HMDS/TEOSDOI : https://doi.org/10.1007/s11998-020-00444-y En ligne : https://link.springer.com/content/pdf/10.1007/s11998-020-00444-y.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=35931
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 18, N° 3 (05/2021) . - p. 807-818[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 22785 - Périodique Bibliothèque principale Documentaires Disponible Field testing and ecotoxicity of acrylate-based sol–gel coatings in fresh and seawater / Damir Hamulic in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 20, N° 2 (03/2023)
[article]
Titre : Field testing and ecotoxicity of acrylate-based sol–gel coatings in fresh and seawater Type de document : texte imprimé Auteurs : Damir Hamulic, Auteur ; Ieva Putna-Nimane, Auteur ; Ineta Liepina-Leimane, Auteur ; Inta Dimante-Deimantovica, Auteur ; Peter Rodic, Auteur ; Ingrid Milosev, Auteur Année de publication : 2023 Article en page(s) : p. 687-701 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Acier L'acier est un alliage métallique utilisé dans les domaines de la construction métallique et de la construction mécanique.
L'acier est constitué d'au moins deux éléments, le fer, très majoritaire, et le carbone, dans des proportions comprises entre 0,02 % et 2 % en masse1.
C'est essentiellement la teneur en carbone qui confère à l'alliage les propriétés du métal qu'on appelle "acier". Il existe d’autres métaux à base de fer qui ne sont pas des aciers comme les fontes et les ferronickels par exemple.
Algues marines
Angle de contact
Biodégradation
Corrosion
Daphnie
Ecotoxicologie
Essais (technologie)
Essais de brouillard salin
Essais de résilience
Immersion
Lixiviation
Métaux -- Revêtements protecteurs
Mouillabilité
Polyméthacrylates
SiliconesLes silicones, ou polysiloxanes, sont des composés inorganiques formés d'une chaine silicium-oxygène (...-Si-O-Si-O-Si-O-...) sur laquelle des groupes se fixent, sur les atomes de silicium. Certains groupes organiques peuvent être utilisés pour relier entre elles plusieurs de ces chaines (...-Si-O-...). Le type le plus courant est le poly(diméthylsiloxane) linéaire ou PDMS. Le second groupe en importance de matériaux en silicone est celui des résines de silicone, formées par des oligosiloxanes ramifiés ou en forme de cage (wiki).
SiloxanesLes siloxanes sont une classe de composés du silicium dont la formule empirique est R2SiO, où R est un groupe radical qui peut être organique. Des exemples représentatifs sont [SiO(CH3)2]n (diméthylsiloxane) et [SiO(C6H5)2]n (diphénylsiloxane), où n est typiquement supérieur à 4. Ces composés peuvent être des hybrides organiques et inorganiques. Les chaînes organiques confèrent au composé des propriétés hydrophobes alors que la chaîne principale -Si-O-Si-O- est purement inorganique.
Le mot siloxane est dérivé de Silicium, Oxygène et alkane.
Des siloxanes peuvent être trouvés dans des produits tels que des cosmétiques, des déodorants, des enduits hydrophobes pour pare-brise, des peintures et certains savons.
Les siloxanes polymérisés (polysiloxanes) sont appelés silicones1,2.
Le siloxane est massivement utilisé dans l'industrie cosmétique (rouges à lèvre, conditionneurs et shampooings, déodorants, etc.).
Une application récente du Siloxane D5 (2001) a été trouvée dans le nettoyage à sec des textiles en remplacement du perchloroéthylène. Ce procédé est très répandu aux États-Unis et au Royaume-Uni. Il devient de plus en plus courant en Europe continentale dont la France, afin de promouvoir l'usage de procédés écologiques et respectueux de la santé humaine.
Sol-gel, ProcédéIndex. décimale : 667.9 Revêtements et enduits Résumé : We demonstrate a laboratory and field-testing of six siloxane-based coatings to be potentially used as a topcoat paint on structured steel. The coatings were prepared with acrylate monomers of six chain lengths, from methyl to dodecyl. Coated steel samples were immersed in seawater (the Adriatic Sea, 38‰ salinity) and freshwater (the river Ižica) for up to five months to test their properties. The coated samples were tested for possible leaching when exposed to accelerated harsh environmental conditions. The leachate toxicity was examined against microalgae Desmodesmus subspicatus and microcrustacean Daphnia magna. The ethyl and butyl methacrylate coatings provided the best protective properties compared to those with longer chain lengths. The synthesized coatings show less toxicity than commercial biocide-containing coatings. The developed coatings represent a good starting point for an additional upgrade in the system for offshore or similar applications. Note de contenu : - METHODS AND MATERIALS : Preparation of substrate and coatings - Wettability of the coatings - Laboratory corrosion test - Field immersion test - Accelerated leaching test - Ecotoxicological test with Daphnia magna Straus, 1820 - Algae growth test
- RESULTS AND DISCUSSION : Wettability of the coating surface - Laboratory salt spray chamber test - Field immersion test - Immersion in Ižica river - Ecotoxicological test - Daphnia magna test
- Table 1 : Water contact angle values for hybrid coatings with different lengths of the alkyl chain
- Table 2 : The average amount of fouling coverage percentage after immersion of hybrid sol–gel coatings in the Adriatic SeaDOI : https://doi.org/10.1007/s11998-022-00701-2 En ligne : https://link.springer.com/content/pdf/10.1007/s11998-022-00701-2.pdf?pdf=button Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=39312
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 20, N° 2 (03/2023) . - p. 687-701[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 24056 - Périodique Bibliothèque principale Documentaires Disponible Filaments de para-aramides conducteurs d'électricité avec revêtement d'oxyde d'indium-étain / X. Tao in TEXTILES A USAGES TECHNIQUES (TUT), N° 68 (06-07-08/2008)
[article]
Titre : Filaments de para-aramides conducteurs d'électricité avec revêtement d'oxyde d'indium-étain Type de document : texte imprimé Auteurs : X. Tao, Auteur ; C. Dufour, Auteur ; M. Bouazaoui, Auteur ; M. Lewandowski, Auteur ; V. Koncar, Auteur Année de publication : 2008 Article en page(s) : p. 26-32 Langues : Multilingue (mul) Catégories : Conduction électrique
Dioxyde d'étain
Enduction textile
Fibre aramide
FilamentsFibre de longueur infinie ou extrême comme celle qu'on trouve dans la soie à l'état naturel. Les fibres manufacturées sont extrudées en filaments qui sont transformés en fils continus, en fibres courtes ou en câbles.
Oxyde d'indiumL'oxyde d'indium(III) (In2O3) est un composé chimique, un oxyde amphotère d'indium. (Wikipedia)
Résistance à la traction
Revêtement métallique
Sol-gel, Procédé
Textiles et tissus à usages techniquesIndex. décimale : 677.4 Textiles artificiels Résumé : De fins films transparents d'oxyde d'indium-étain (ITO) ont été déposés par immersion sur un multifilament de para-aramide. Le procédé sol-gel a été adapté à l'utilisation de recuits à des températures plus basses compatibles avec le type de matériau utilisé. Les résultats montrent que le revêtement ITO réduit la résistivité des filaments, ce qui ouvre de nouvelles voies à des applications de tissus conducteurs ou semi-conducteurs. Note de contenu : - Le procédé "sol-gel" par enduction plein bain
- Morphologie
- Résistance à la traction
- Propriétés électriques
- FIGURES : 1. Présence de nano cristaux sur le filament périphérique - 2. Surface sans la présence évidente de nano cristaux (filaments intérieurs) - 3. Faible densité de cristaux (filaments intérieurs) - 4. La couche d'enduction altérée, type 1 -s 5. La couche d'enduction altérée, type 2
- TABLEAUX : 1. Propriétés de résistance des fils de multi filaments de p-aramide avant et après traitement - 2. Résistivité du multi filament p-aramide enduitEn ligne : https://drive.google.com/file/d/1itDckplxCuvV2PQGm1DxJH99WNaSreLM/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=29552
in TEXTILES A USAGES TECHNIQUES (TUT) > N° 68 (06-07-08/2008) . - p. 26-32[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 010448 - Périodique Bibliothèque principale Documentaires Disponible Flame retardant finishing of cotton fabric based on ionic liquid compounds containing boron prepared with the sol-gel method / Mohamed El Messoudi in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 19, N° 5 (09/2022)
[article]
Titre : Flame retardant finishing of cotton fabric based on ionic liquid compounds containing boron prepared with the sol-gel method Type de document : texte imprimé Auteurs : Mohamed El Messoudi, Auteur ; Aicha Boukhriss, Auteur ; Aziz Bentis, Auteur ; Mehdi El Bouchti, Auteur ; Mohamed Ait Chaoui, Auteur ; M'hammed El Kouali, Auteur ; Said Gmouh, Auteur Année de publication : 2022 Article en page(s) : p. 1609-1619 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Bore
CotonLe coton est une fibre végétale qui entoure les graines des cotonniers "véritables"(Gossypium sp.), un arbuste de la famille des Malvacées. Cette fibre est généralement transformée en fil qui est tissé pour fabriquer des tissus. Le coton est la plus importante des fibres naturelles produites dans le monde. Depuis le XIXe siècle, il constitue, grâce aux progrès de l'industrialisation et de l'agronomie, la première fibre textile du monde (près de la moitié de la consommation mondiale de fibres textiles).
Essais (technologie)
Essais de comportement au feu
Essais dynamiques
IgnifugeantsComposé chimique utilisé pour réduire l'inflammabilité. Il peut être incorporé au produit durant sa fabrication ou appliqué ultérieurement à sa surface.
Liquides ioniques
Sol-gel, Procédé
Textiles et tissus -- FinitionRésumé : Cotton (CO) fabrics with flame retardant properties based on ionic liquids: 1-methyl-3-(-((triethoxysilyl)oxy)propyl)-1H-imidazol-3-ium chloride (MCPTS) and 1-(3-(triethoxysilyl)propyl)pyridine-1-ium chloride (PCPTS) with boron from boric acid are successfully obtained via a sol-gel process. Fourier transform infrared spectroscopy (FTIR), optical microscopy analysis, and scanning electron microscopy (SEM) images, were first carried out to characterize the chemical composition and the morphology of the treated and untreated cotton fabrics, respectively. The investigation of flame resistance was evaluated by the vertical burning test. It was observed that the treated cotton fabrics exhibited good flame-retardant properties and did not burn even after 10 s flame application duration and the rate of flame spread was inhibited compared to the pristine cotton fabric. Furthermore, the thermal comportment of cotton fabrics was analyzed by thermogravimetric (TG) analysis and differential scanning calorimeter (DSC). Moreover, the tensile strength of the treated textiles is mostly reserved. In this work, we prove that the sol-gel method using ionic liquids and boron could be used as an effective flame retardant to develop finishing cotton fabrics for textile fireproof applications. Note de contenu : - EXPERIMENTAL : Material - Synthesis of MCPTS and PCPTS salts - Sols synthesis based on MCPTS doped boron - Treatment of cotton fabric - FTIR analysis - Morphological analysis - Vertical flame test - Thermogravimetric analysis - Differential scanning calorimeter (DSC) - Mechanical properties measurements - The washing test
- RESULTS AND DISCUSSION : FTIR analysis - Morphological analysis -
Vertical flame test - Thermogravimetric analysis - Differential scanning calorimeter (DSC) - Mechanical properties measurements - The washing test
- Table 1 : Samples and their structural design
- Table 2 : Results of vertical flammability test of untreated CF and TCF samples
- Table 3 : Thermogravimetric data of untreated and treated CO in air atmosphere
- Table 4 : Data of untreated and treated CODOI : https://doi.org/10.1007/s11998-022-00633-x En ligne : https://link.springer.com/content/pdf/10.1007/s11998-022-00633-x.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=38293
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 19, N° 5 (09/2022) . - p. 1609-1619[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23672 - Périodique Bibliothèque principale Documentaires Disponible PermalinkLa fonctionnalisation des surfaces / Florent Deliane in INDUSTRIE & TECHNOLOGIES, N° 955 (05/2013)
PermalinkFormation et dynamique des gels de laponite / A. Mourchid in LES CAHIERS DE RHEOLOGIE, Vol. X, N° 3-4 (11/1992)
PermalinkGel-sol-gel ou sol-gel-sol ? / Enzo Olivieri in L'ACTUALITE CHIMIQUE, N° 475 (07-08/2022)
PermalinkGel-sol synthesis of surface-treated TiO2 nanoparticles and incorporation with waterborne acrylic resin systems for clear UV protective coatings / Changfeng Chen in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 11, N° 5 (09/2014)
PermalinkGel-sol transitions of chrome tanned leather waste hydrolysate / F. Langmaier in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 85, N° 3 (05-06/2001)
PermalinkGraphene based functional coatings : an introspection / Ravindra Bari in PAINTINDIA, Vol. LXXII, N° 12 (12/2022)
PermalinkHigh temperature protection / Stefan Sepeur in EUROPEAN COATINGS JOURNAL (ECJ), N° 09/2009 (09/2009)
PermalinkHighly moisture-proof polysilsesquioxane coating prepared via facile sol-gel process / Yang Dongjiang in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 3, N° 2 (04/2006)
PermalinkHuman subjective response to aluminum coating surfaces / Marco Ajovalasit in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 16, N° 3 (05/2019)
PermalinkHybrid organic/inorganic coatings produced using a dual-cure mechanism / Jie He in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 9, N° 4 (07/2012)
PermalinkHybrid sol-gel coatings for corrosion protection of galvanized steel in simulated concrete pore solution / Riba B. Figueira in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 13, N° 2 (03/2016)
PermalinkPermalinkHydrophobization, smoothing, and barrier improvements of cellulose nanofibril films by sol–gel coatings / Jari Vartiainen in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 17, N° 1 (01/2020)
PermalinkImpact of hybrid self-assembled nanophase particle-based sol–gel coatings on the localized corrosion behavior of modified 9Cr–1Mo steel in chloride medium / S. Ramya in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 14, N° 1 (01/2017)
Permalink