Accueil
Catégories
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
Film formation mechanism of two-component waterborne polyurethane coatings / Charles R. Hegedus in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 68, N° 852 (01/1996)
[article]
Titre : Film formation mechanism of two-component waterborne polyurethane coatings Type de document : texte imprimé Auteurs : Charles R. Hegedus, Auteur ; Andrew G. Gilicinski, Auteur ; Robert J. Haney, Auteur Année de publication : 1996 Article en page(s) : p. 51-61 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Coalescence (Sciences physiques)
Dispersions et suspensions
Formation de film
Isocyanates
Polyuréthanes
Réactions chimiques
Revêtements bi-composant:Peinture bi-composant
Revêtements en phase aqueuse:Peinture en phase aqueuseIndex. décimale : 667.9 Revêtements et enduits Résumé : Two-component (2K) waterborne polyurethane coatings are a new technology which has been demonstrated in a number of heavy duty applications. They exhibit performance properties equivalent to 2K solvent-borne polyurethanes, with the advantage of reduced volatile organic compounds (VOCs). Although the use of these systems has been demonstrated successfully, the details of their film formation mechanism have not been established. The objective of this work was to propose and confirm the film formation mechanism of these systems. A dynamic series of interrelated events which occur during the process was identified using a number of analytical techniques to study two isocyanate/ hydroxyl functional dispersion systems. The mechanism is presented in terms of an event timeline that chronicles the critical events which occur prior to and after application of the coating. Film property development after application also was evaluated and these results were analyzed in terms of the proposed film formation mechanism. Note de contenu : - BACKGROUND ON FILM FORMATION
- PROPOSED FILM FORMATION MECHANISM FOR 2K WATERBORNE POLYURETHANE COATINGS
- EXPERIMENTAL : Materials and coating preparation - Equipment and procedures
- RESULTS AND DISCUSSION : Particle coalescence in the admixed state - Isocyanate reaction in the admixed state - Evaporation of volatiles and particle coalescence after application - Isocyanate reaction afetr application - Development of film integrityPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=18310
in JOURNAL OF COATINGS TECHNOLOGY (JCT) > Vol. 68, N° 852 (01/1996) . - p. 51-61[article]Réservation
Réserver ce document
Exemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité 003513 - Périodique Bibliothèque principale Documentaires Disponible 003522 - Périodique Bibliothèque principale Documentaires Exclu du prêt Finding the right cure / Stephen Davidson in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 192, N° 4451 (04/2002)
[article]
Titre : Finding the right cure Type de document : texte imprimé Auteurs : Stephen Davidson, Auteur Année de publication : 2002 Article en page(s) : p. 24-26 Langues : Anglais (eng) Catégories : Bois -- Revêtements
Dispersions et suspensions
Inhibiteurs (chimie)
Oxygène
Peinture -- Recyclage
Polymères cationiques
Revêtements -- Séchage sous rayonnement
Revêtements -- Séchage sous rayonnement:Peinture -- Séchage sous rayonnement
Revêtements poudre:Peinture poudre
Technologie médicaleIndex. décimale : 667.9 Revêtements et enduits Résumé : Radiation curing equipment is beginning to enjoy a period of development. The author looks at what strides are being taken.
One of the most important demands made by users of radiation curing is the availability and reliability of equipment. The area of aquipment includes issues of running costs and ease of introduction or retro-fitting to existing coating lines.
A great step forward in electron beam curing has been the introduction of more affordable equipement, which runs at a lower accelerating voltage than earlier commercial e.b.units (J Chrusciel, Proceedings RadTech Europe Basel, 2001, 367-373). Equipment that has a lower accelerating voltage tends to benefit from greater reliability. this is because of the longer life of both the metal foil windows and the electrongun filaments. The extent to which electrons will penetrate coatings is related to the accelerating voltage and the thickness of the coating.
Penetration of thick coatings is achievable with quite modest voltages (for a 25 mm thick coating only 110 kVolts is required). Because e.b. curing is carried out under a nitrogen blanket, oxygen inhibition is not a problem, and for radical curing processes an initiator does not have to be used.
As a result, the cure occurs at ambient or slightly higher temperatures (dependent upon the thickness of the coating and the thermal conductivity of the substrate). The lack of a photoinitiator in a formulation means that the cured formulations do not contain migratable species originating from the this source.Note de contenu : - Packaging issues
- Oxygen inhibition
- Wood coatings
- Aqueous dispersions
- Powder coatings
- Cationically curable materials
- Medical applications
- Recycling technologiesPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=28093
in POLYMERS PAINT COLOUR JOURNAL - PPCJ > Vol. 192, N° 4451 (04/2002) . - p. 24-26[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 000326 - Périodique Bibliothèque principale Documentaires Disponible A finer route to protective coatings / Audrey Drinberg in EUROPEAN COATINGS JOURNAL (ECJ), N° 4 (04/2014)
[article]
Titre : A finer route to protective coatings : Air-drying waterborne nanodispersions give high performance Type de document : texte imprimé Auteurs : Audrey Drinberg, Auteur ; Irina Tarasova, Auteur Année de publication : 2014 Article en page(s) : p. 30-35 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Colloides
Copolymère vinyle alkyde
Dispersions et suspensions
Nanoparticules
Polymérisation par oxydation
Potentiel zeta
Résistance aux brouillard salin
Réticulation (polymérisation)
Revêtement -- Séchage
Revêtements en phase aqueuse
Stabilité au stockage
Transition vitreuseIndex. décimale : 667.9 Revêtements et enduits Résumé : Oxidatively drying vinylated alkyd dispersions have been developed, based on a technique for producing very fine nanodispersions. They provide good physical properties for high-performance protective coatings, including salt spray resistance, and high storage stability with zero VOC content. Note de contenu : - How the VA dispersions are prepared
- The kinetics of emulsification and importance of Tg
- Particle size is in the nano range
- Zeta potential measurements confirm stability
- How double bonds modify drying
- Gel fraction content in the films is determined
- Selecting a drier for aqueous VA dispersions
- An effective and environmentally friendly formulationEn ligne : https://drive.google.com/file/d/1DrTFMC61pBirsZd-F-COUf2RK1f-IWTf/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=21014
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 4 (04/2014) . - p. 30-35[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 16166 - Périodique Bibliothèque principale Documentaires Disponible Fluides électro et magnéto rhéologiques / G. Bossis in LES CAHIERS DE RHEOLOGIE, Vol. X, N° 3-4 (11/1992)
[article]
Titre : Fluides électro et magnéto rhéologiques Type de document : texte imprimé Auteurs : G. Bossis, Auteur ; H. Clercx, Auteur ; Y. Grasselli, Auteur ; E. Lemaire, Auteur ; A. Meunier, Auteur Année de publication : 1992 Article en page(s) : p. 17-34 Note générale : Bibliogr. Langues : Français (fre) Catégories : Dispersions et suspensions
Fluides magnétiques
Fluides, Mécanique des
RhéologieIndex. décimale : 532.05 Mécanique des fluides et des liquides - Dynamique (cinétique et cinématique) Résumé : Les fluides électro et magnéto-rhéologiques sont des suspensions de particules solides, de taille voisine du micron, qui se polarisent sous l'effet d'un champ électrique ou magnétique. On obtient alors une agrégation transitoire des particules sous forme d'une structure anisotrope qui modifie considérablement les propriétés rhéologiques de la suspension. Outre l'intérêt que présentent ces fluides dans les applications mettant en jeu une viscosité pilotable par de l'électronique, ils sont également attractifs par la richesse des phénomènes physiques mis en jeu. On essaiera dans cet article de donner une vue d'ensemble des comportements rhéologiques de ces fluides en insistant tout particulièrement sur les aspects structuraux - à l'échelle de la particule où à une échelle intermédiaire - qui permettent d'expliquer la rhéologie de ces fluides en présence d'un champ. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=5999
in LES CAHIERS DE RHEOLOGIE > Vol. X, N° 3-4 (11/1992) . - p. 17-34[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 002098 - Périodique Bibliothèque principale Documentaires Disponible Foam jackets for steel columns / Nadine Baumgartl in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 203, N° 4584 (05/2013)
[article]
Titre : Foam jackets for steel columns Type de document : texte imprimé Auteurs : Nadine Baumgartl, Auteur Année de publication : 2013 Article en page(s) : p. 42-43 Langues : Anglais (eng) Catégories : Dispersions et suspensions
IgnifugeantsComposé chimique utilisé pour réduire l'inflammabilité. Il peut être incorporé au produit durant sa fabrication ou appliqué ultérieurement à sa surface.
Mousses (matériaux)
Polymères en émulsionIndex. décimale : 667.9 Revêtements et enduits Résumé : To prevent steel frames of skyscrapers and stadiums from buckling within minutes during a fire, they are provided with special fire protection coatings. Wacker has developed a dispersion, which ensures the necessary elasticity, strength and adhesion of the protective layer. Note de contenu : - Heat makes steel columns unstable
- Heat barrier
- Binder choice is crucial
- Meeting environmental needsEn ligne : https://drive.google.com/file/d/1fdURUp4pnejiFA03nIMyEZYtkLotoeMD/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=18556
in POLYMERS PAINT COLOUR JOURNAL - PPCJ > Vol. 203, N° 4584 (05/2013) . - p. 42-43[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 15080 - Périodique Bibliothèque principale Documentaires Disponible Formation et dynamique des gels de laponite / A. Mourchid in LES CAHIERS DE RHEOLOGIE, Vol. X, N° 3-4 (11/1992)
PermalinkFormulation et formation, 1. Textes des conférences journées ENS Cachan, Mai 1989, option formulation Ecoles d'Ingénieurs, travaux pratiques : pharmacie galénique, agrochimie, peintures et vernis, colles, stabilité de suspensions, photochimie / Société Française de Chimie / Poitiers : Service enseignements supérieurs-didactique de la chimie (1990)
PermalinkFormulation et formation, 3. Formulation et formation. Volume 3 / Société Française de Chimie / Poitiers : Service enseignements supérieurs-didactique de la chimie (1991)
PermalinkFormulation et formation, 4. Rencontres industrie-enseignants / Société Française de Chimie / Poitier : Service Enseignements Supérieurs-didactique de la chimie (SESDiC) (1994)
PermalinkFormulation des produits et matériaux / Anne-Marie Pensé-Lhéritier / Paris : Hermès Science Publications (2010)
PermalinkFormulation des solides divisés / Léa Metlas-Komunjer / Les Ulis : EDP Sciences (2009)
PermalinkFormulations sébo-résistantes pour une adhésion cutanée améliorée / Tatyana Abel Roberman in EXPRESSION COSMETIQUE, N° Hors-série (12/2020)
PermalinkFumed metal oxide dispersions expand aqueous inkjet printing substrates / Tianqi Liu in COATINGS WORLD, Vol. 24, N° 3 (03/2019)
PermalinkFumed silica dispersions / Matthew Linares in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 198, N° 4520 (01/2008)
PermalinkGraphene, an additive for the coatings market / Lynn Chikosha in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 212, N° 4675 (06/2022)
PermalinkGreen coating technologies / Andrea Knebel-Kyriakidis in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 199, N° 4539 (08/2009)
PermalinkGreen issues / Rainer Höfer in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 196, N° 4504 (09/2006)
PermalinkGreener manufacturing process for chain stopped alkyd paint / Maryam Amra Jordaan in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 208, N° 4641 (05/2018)
PermalinkGrinding and dispersing / Harry Way in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 196, N° 4506 (11/2006)
PermalinkPermalink