Accueil
Catégories
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
Valorisation of tannery waste and animal by-product for acoustics applications / Tesfay Gebryergs in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CXVI, N° 6 (06/2021)
[article]
Titre : Valorisation of tannery waste and animal by-product for acoustics applications Type de document : texte imprimé Auteurs : Tesfay Gebryergs, Auteur ; C. Sivaranjani, Auteur ; Nishad Fathima Nishter, Auteur Année de publication : 2021 Article en page(s) : p. 198-202 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Caractérisation
Composites -- Moulage par compression
Cuirs et peaux -- Déchets -- Recyclage
Déchets -- Valorisation
Essais dynamiques
Isolation acoustique
Laine
Matériaux -- Propriétés acoustiques
Mélange
Mesure
Porosité
Résistance à la traction
Son -- Absorption
Tannage -- DéchetsIndex. décimale : 675.2 Préparation du cuir naturel. Tannage Résumé : Disposal of chromium-containing solid wastes generated from the leather industry poses a major threat to tanners worldwide. Herein, we propose a strategy to utilize chrome shaving waste for sound absorption application by blending it with natural fiber, wool. The composites were prepared at various ratios with different thickness by compression molding method and subjected to characterizations like scanning electron microscope, porosity measurements, and tensile strength analysis. The sound absorption behavior of the composites was evaluated using the two-microphone impedance tube method. The results indicate that the composites with higher thickness show better sound absorption at higher frequencies when compared to the natural wool and composites with lesser thicknesses. Thus, this material can be used as a sound-absorbing material thereby paving the alternative use of leather waste utilization. Note de contenu : - MATERIALS AND METHODS
- METHODS : Preparation of acoustic composites - Characterization of acoustic materials
- RESULTS AND DISCUSSIONS : Morphology - Porosity - Tensile strength - Sound absorption coefficient studiesDOI : https://doi.org/10.34314/jalca.v116i6.4308 En ligne : https://drive.google.com/file/d/1cxw-Smkf2KcoYY8HDhSHOx2ZYSx_lMUl/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=36042
in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA) > Vol. CXVI, N° 6 (06/2021) . - p. 198-202[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 22829 - Périodique Bibliothèque principale Documentaires Disponible Vêtements militaires légers pour protection chimique / Bertram Böhringer in TEXTILES A USAGES TECHNIQUES (TUT), N° 68 (06-07-08/2008)
[article]
Titre : Vêtements militaires légers pour protection chimique Type de document : texte imprimé Auteurs : Bertram Böhringer, Auteur Année de publication : 2008 Article en page(s) : p. 14-19 Langues : Multilingue (mul) Catégories : Absorbants et adsorbants
Equipement de protection individuelle
Filtres
Industrie militaire
Perméabilité
Protection chimique
Résistance à la déchirure
Résistance à la traction
Substances dangereuses
Textiles et tissus à usages techniques
Vêtements de protectionIndex. décimale : 677.4 Textiles artificiels Résumé : Les armes de destruction massive ont été efficacement bannies dans la plupart des pays qui ont signé l'Acte de non-prolifération pour leur fabrication et leur utilisation. Aussi, l'usage de ces armes n'est plus prévu dans le cadre d'opérations militaires normales, mais plus certainement au cours d'actions terroristes. Note de contenu : - Les besoins des utilisateurs
- Filtres adsorbants perméables à l'air
- Développement des matériaux filtrants adsorbants, perméables à l'air
- Caractéristiques de protection
- FIGURES : 1. Filtre Saratoga adsorbant et perméable à l'air - 2. Rôle des filtres adsorbants, perméables à l'air - 3. résistance à la déchirure - 4. Résistance à la traction - 5. Poids des filtres adsorbants, perméables à l'air - 6. Nombre de cycles de lavage des filtres Saratoga - 7. Nombre de jours de port des filtres Saratoga - 8. Comparaison entre les filtres perméables à l'air et les matériaux barrière - 9. Contamination adsorbée par la peau protégée par un matériau barrière et par le SaratogaEn ligne : https://drive.google.com/file/d/11AVyMhcqeErbG5xJBsO8HmXLZQLnkUJ3/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=29550
in TEXTILES A USAGES TECHNIQUES (TUT) > N° 68 (06-07-08/2008) . - p. 14-19[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 010448 - Périodique Bibliothèque principale Documentaires Disponible Waterless dyeing of polylactic acid with disperse dyes using decamethylcyclopentasiloxane as medium / Jianguo Wu ; Guojie Ma ; Qufu Wei in COLORATION TECHNOLOGY, Vol. 139, N° 3 (06/2023)
[article]
Titre : Waterless dyeing of polylactic acid with disperse dyes using decamethylcyclopentasiloxane as medium Type de document : texte imprimé Auteurs : Jianguo Wu, Auteur ; Guojie Ma, Auteur ; Qufu Wei, Auteur Année de publication : 2023 Article en page(s) : p. 306-313 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Caractérisation
Décaméthylcyclopentasiloxane
Fibres textiles -- Propriétés mécaniques
Fibres textiles synthétiques -- Propriétés tinctoriales
Polylactique, AcideL'acide polylactique (anglais : polylactic acid, abrégé en PLA) est un polymère entièrement biodégradable utilisé dans l'alimentation pour l'emballage des œufs et plus récemment pour remplacer les sacs et cabas en plastiques jusqu'ici distribués dans les commerces. Il est utilisé également en chirurgie où les sutures sont réalisées avec des polymères biodégradables qui sont décomposés par réaction avec l’eau ou sous l’action d’enzymes. Il est également utilisé pour les nouveaux essais de stent biodégradable.
Le PLA peut-être obtenu à partir d'amidon de maïs, ce qui en fait la première alternative naturelle au polyéthylène (le terme de bioplastique est utilisé). En effet, l'acide polylactique est un produit résultant de la fermentation des sucres ou de l'amidon sous l'effet de bactéries synthétisant l'acide lactique. Dans un second temps, l'acide lactique est polymérisé par un nouveau procédé de fermentation, pour devenir de l'acide polylactique.
Ce procédé conduit à des polymères avec des masses molaires relativement basses. Afin de produire un acide polylactique avec des masses molaires plus élevées, l'acide polylactique produit par condensation de l'acide lactique est dépolymérisé, produisant du lactide, qui est à son tour polymérisé par ouverture de cycle.
Le PLA est donc l’un de ces polymères, dans lequel les longues molécules filiformes sont construites par la réaction d’un groupement acide et d’une molécule d’acide lactique sur le groupement hydroxyle d’une autre pour donner une jonction ester. Dans le corps, la réaction se fait en sens inverse et l’acide lactique ainsi libéré est incorporé dans le processus métabolique normal. On obtient un polymère plus résistant en utilisant l'acide glycolique, soit seul, soit combiné à l’acide lactique.
Résistance à la traction
Teinture -- Fibres textiles synthétiquesIndex. décimale : 667.3 Teinture et impression des tissus Résumé : Polylactic acid (PLA) fibre as a new generation of eco-friendly polyester fibre is expected to substitute polyethylene terephthalate (PET) fibre to be an important textile fibre raw material. However, there exist severe strength loss and light dyeing colour by the traditional water bath dyeing method, which seriously affect the promotion and application of PLA fibre in the textile fields. Therefore, it is necessary to study waterless dyeing method for PLA. Decamethylcyclopentasiloxane (D5) possesses excellent physical and chemical properties with the characteristics of odourless, non-flammable, and stable to various chemicals, which has been studied to be used as a waterless dyeing medium for PET fabric. In this study, D5 was selected as the medium to study the waterless dyeing process and properties for PLA. The effects of disperse dye dosage, dyeing temperature, dyeing time and liquor ratio on the dyeing properties of PLA fabric were investigated. The results showed that the optimal dyeing process conditions were as follows: the dye dosage was 4%, dyeing temperature and time were 120°C and 40 min, respectively, and the liquor ratio was 1:10. Then PLA was dyed by three different colour disperse dyes using the optimal process which were compared with the traditional water bath. The results showed that the properties of dyed PLA fabrics with D5 could reach the dyeing effect of the traditional water bath method, while causing less influence on its mechanical property. Therefore, this research proved that D5 can be used as a dyeing medium for PLA fabric to substitute the traditional water bath dyeing. Note de contenu : - EXPERIMENTS : Materials - Dyeing process - Characterisation
- RESULTS AND DISCUSSION : Effect of the dye dosage on PLA dyeing properties - Effect of the dyeing temperature on PLA dyeing properties -
Effect of dyeing time on PLA dyeing property - Effect of the liquor ratio on PLA dyeing properties - Comparison of PLA dyeing in D5 and traditional water bath
- Table 1 : Dyeing properties and tensile strength of polylactic acid (PLA) zipper tapes with different dye dosages
- Table 2 : Dyeing properties and tensile strength of polylactic acid (PLA) zipper tapes with different dyeing temperatures
- Table 3 : Dyeing properties and tensile strength of polylactic acid (PLA) zipper tape with different dyeing times
Effect of the liquor ratio on PLA dyeing properties
- Table 4 : Dyeing properties and tensile strength of polylactic acid (PLA) zipper tapes with different liquor ratios
Comparison of PLA dyeing in D5 and traditional water bath
- Table 5 : Dyeing properties and tensile strength of polylactic acid (PLA) zipper tape using decamethylcyclopentasiloxane (D5) medium and water bathDOI : https://doi.org/10.1111/cote.12652 En ligne : https://onlinelibrary.wiley.com/doi/epdf/10.1111/cote.12652 Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=39540
in COLORATION TECHNOLOGY > Vol. 139, N° 3 (06/2023) . - p. 306-313[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 24086 - Périodique Bibliothèque principale Documentaires Disponible What is the most suitable material combination / Christian Hopmann in KUNSTSTOFFE INTERNATIONAL, Vol. 112, N° 2 (2022)
[article]
Titre : What is the most suitable material combination : Manufacture of a rear license plate light in a highly integrated production cell Type de document : texte imprimé Auteurs : Christian Hopmann, Auteur ; Ingrid Sturm, Auteur ; Jonas Gerads, Auteur Année de publication : 2022 Article en page(s) : p. 48-51 Langues : Anglais (eng) Catégories : Assemblages multimatériaux
Automobiles -- Eclairage
Conduction électrique
Diodes électroluminescentes
Matières plastiques -- Moulage par injection
Matières plastiques dans les automobiles
Polycarbonates
Polyméthacrylate de méthyleLe poly(méthacrylate de méthyle) (souvent abrégé en PMMA, de l'anglais Poly(methyl methacrylate)) est un polymère thermoplastique transparent obtenu par polyaddition dont le monomère est le méthacrylate de méthyle (MMA). Ce polymère est plus connu sous son premier nom commercial de Plexiglas (nom déposé), même si le leader global du PMMA est Altuglas International9 du groupe Arkema, sous le nom commercial Altuglas. Il est également vendu sous les noms commerciaux Lucite, Crystalite, Perspex ou Nudec.
Productique
Résistance à la traction
Thermocinétique
Transmission de vapeur d'humiditéIndex. décimale : 668.4 Plastiques, vinyles Résumé : The aim of this joint project is to develop a production cell in which a rear license plate light can be manufactured with hybrid processes without any additional steps such as bonding. Some of the necessary analyses and pre-testing of the material combinations resulting from the structure of the product - plastic housing and optics plus metal conductive tracks - are presented in this article. Note de contenu : - New production concept shortens process chain
- How conductive are the test specimens ?
- What is the bond strength of the imks specimens ?
- Composite strength of the optical materials
- Media tightness of two-component parts
- Fig. 1 : Specific electrical conductivities of all material combinations from a metallic solder and a standard or thermally conductive plastic
- Fig. 2 : Necessary pull-out forces for all material composites. Both the metallic solders can withstand the highest extraction forces in combination with TC110
- Fig. 3 : Tensile strength of the produced 2-component specimens with declining bond strength in increasing thermal conductivity of the materials
- Fig. 4 : Schematic illustration of the test set-up for the WVTR measurement
- Fig. 5 : Results of the WVTR measurements of the 2-component specimens as a function of the material area percentagesEn ligne : https://drive.google.com/file/d/1pFH67RTYCDOBORpaCYRrZtKQP2x8ulnG/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=37310
in KUNSTSTOFFE INTERNATIONAL > Vol. 112, N° 2 (2022) . - p. 48-51[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23299 - Périodique Bibliothèque principale Documentaires Disponible
[article]
Titre : Yarns from bio-based polymers Type de document : texte imprimé Année de publication : 2018 Article en page(s) : p. 57-59 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Allongement (mécanique)
Biopolymères -- Propriétés mécaniques
Etudes comparatives
Fibres textiles synthétiques
Huile de ricin et constituants
Maïs et constituants
Polyamide 410Le polyamide 410 (PA 410), dérivé 70% de l'huile de ricin est commercialisé sous le nom EcoPaXX par DSM. Le PA 410 est un polyamide de haute performance qui combine les avantages d'un point de fusion élevé (environ . 250 ° C), une faible absorption d'humidité et une excellente résistance aux diverses substances chimiques.
Polyamide 66
Polyéthylène téréphtalate
Polylactique, AcideL'acide polylactique (anglais : polylactic acid, abrégé en PLA) est un polymère entièrement biodégradable utilisé dans l'alimentation pour l'emballage des œufs et plus récemment pour remplacer les sacs et cabas en plastiques jusqu'ici distribués dans les commerces. Il est utilisé également en chirurgie où les sutures sont réalisées avec des polymères biodégradables qui sont décomposés par réaction avec l’eau ou sous l’action d’enzymes. Il est également utilisé pour les nouveaux essais de stent biodégradable.
Le PLA peut-être obtenu à partir d'amidon de maïs, ce qui en fait la première alternative naturelle au polyéthylène (le terme de bioplastique est utilisé). En effet, l'acide polylactique est un produit résultant de la fermentation des sucres ou de l'amidon sous l'effet de bactéries synthétisant l'acide lactique. Dans un second temps, l'acide lactique est polymérisé par un nouveau procédé de fermentation, pour devenir de l'acide polylactique.
Ce procédé conduit à des polymères avec des masses molaires relativement basses. Afin de produire un acide polylactique avec des masses molaires plus élevées, l'acide polylactique produit par condensation de l'acide lactique est dépolymérisé, produisant du lactide, qui est à son tour polymérisé par ouverture de cycle.
Le PLA est donc l’un de ces polymères, dans lequel les longues molécules filiformes sont construites par la réaction d’un groupement acide et d’une molécule d’acide lactique sur le groupement hydroxyle d’une autre pour donner une jonction ester. Dans le corps, la réaction se fait en sens inverse et l’acide lactique ainsi libéré est incorporé dans le processus métabolique normal. On obtient un polymère plus résistant en utilisant l'acide glycolique, soit seul, soit combiné à l’acide lactique.
Polymères -- Biodégradation
Résistance à la tractionIndex. décimale : 677.4 Textiles artificiels Résumé : From eliminating plastic microbeads in household and cosmetic products to the drive to clean up the 'Great pacific garbage natch' – the mass of plastic pollution floating between Hawaii and California - efforts to reduce the usage of petrochemical-based plastics are on the increase, as is public awareness of the problem. It is a doubleedged sword: the need to reduce reliance on fossil-based petrochemicals in favor of products from renewable resources and, at the same time, ensure that the waste produced can be degraded in a way that is not harmful to the environment. In recognition of this problem, the use of yarns made from polylactic acid (PLA), the biodegradable and bioactive polyester derived from renewable resources, has increased in recent years. However, creating high-tensile, low weight yarns from PLA for demanding technical applications has proven a significant challenge to manufacture, until now. Recent research by PHP Fibers GmbH, Wuppertal/Germany,a division of Indorama Ventures, Bangkok Thailand, revealed a number of potential candidates for bio-based alternatives for fossil-based fibers, resulting in 2 new products: Diolen 150BT and Enka Nylon Bio. Sustainability and reducing global environmental impact are important aspects of the company's vision for the future. One of the leading recyclers of polyethylene terephthalate (PET) with operations in Europe, America and Asia, the group is committed to being an environmentally responsible corporate citizen. It already recycles over 4.5 billion bottlesper annum resulting in a reduction of approx. 335,000 tons of co, emissions. For PHP Fibers, a leading supplier of high-performance yarns with many years of experience in the automotive industry and other challenging applications, the need to reduce CO2 emissions and a desire to become independent of fossil-based fiber products was a natural extension of this vision. Derived from the renewable raw materials corn starch (Diolen 150BT) and castor oil (Enka Nylon Bio), both products are thermoplastic polymers suitable for fiber spinning. Note de contenu : - Fiber products based on corn strach
- Fiber products based on castor oil
- A promising future
- Fig. 1 : Under industrial composting conditions at 75% RH, Diolen 150BT yarn completely biodegrades within 6 weeks
- Fig. 2 : PLA tenacity/elongation curve : Diolen 150BT demonstrates very good tensile performance over textile yarns
- Fig. 3 : Bio-based Enka Nylon Bio proides a very good dropin for fossil-based PA 66 with a zero CO2 footprint
- Fig. 4 : Enka Nylon tenacity/elongation curve. The tensile characteristics of Enka Nylon Bio are very comprable to those of fossil-based PA 66 technical yarns
- Table 1 : Polymer properties of bio-based PLA polymer vs. fossil-based PET polymer
- Table 2 : Polymer properties of bio-based PA 4.10 vs. fossil-based PA 6.6En ligne : https://drive.google.com/file/d/1Dkn841BXB5tEmox91AoeMJbs7V5UQweY/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=31257
in CHEMICAL FIBERS INTERNATIONAL > (10/2018) . - p. 57-59[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 20259 - Périodique Bibliothèque principale Documentaires Disponible