Accueil
Catégories
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
[article]
Titre : 3D view of sustainability : Why recycled films are not necessarily sustainable Type de document : texte imprimé Auteurs : Lars Kraus, Auteur ; Tim C. Pohl, Auteur ; Ilka Pfisterer, Auteur ; Christian Hopmann, Auteur ; Martin Facklam, Auteur Année de publication : 2020 Article en page(s) : p. 11-15 Langues : Anglais (eng) Catégories : Économie circulaire L'économie circulaire est une expression générique désignant un concept économique qui s'inscrit dans le cadre du développement durable et s'inspirant notamment des notions d'économie verte, d’économie de l'usage ou de l'économie de la fonctionnalité, de l'économie de la performance et de l'écologie industrielle (laquelle veut que le déchet d'une industrie soit recyclé en matière première d'une autre industrie ou de la même).
Son objectif est de produire des biens et services tout en limitant fortement la consommation et le gaspillage des matières premières, et des sources d'énergies non renouvelables ;
Selon la fondation Ellen Mac Arthur (créée pour promouvoir l'économie circulaire1), il s'agit d'une économie industrielle qui est, à dessein ou par intention, réparatrice et dans laquelle les flux de matières sont de deux types bien séparés ; les nutriments biologiques, destinés à ré-entrer dans la biosphère en toute sécurité, et des intrants techniques ("technical nutrients"), conçus pour être recyclés en restant à haut niveau de qualité, sans entrer dans la biosphère
Environnement -- Etudes d'impact
Evaluation
Films plastiques
Matières plastiques -- Industrie -- Aspect de l'environnement
Matières plastiques -- RecyclageIndex. décimale : 668.4 Plastiques, vinyles Résumé : The increasing volume of plastic waste and the growing pollution of the oceans by such waste have brought the sustainable handling of plastic products into the focus of society and politics. Both recycling and bioplastics can be a part of a strategy for greater sustainability, but they are not free of side effects. In order to avoid irrational decisions, it is important to assess their effects comprehensively. Note de contenu : - How can sustainability be comprehensively assessed ?
- Structure of a general calculation method
- Evaluation based on various case studies
- Example : Fruit and vegetable bag
- Fig. 1 : Challenges in the production and use of plastics and demands of society
- Fig. 2 : Phases in the preparation of a life cycle assessment accordint to DIN EN ISO 14040/14044
- Fig. 3 : Allocation of responsibilities for the use of recyclate and the manufacture of recyclable products with a 50-50 allocation
- Fig. 4 : Life cycle and considered process and transport steps for creating and LCA with SimaPro based on Reifenhäuser data
- Fig. 5 : Impact assessment method according to ReCIPe 2016
- Fig. 6 : Balance sheet for fruit and vegetable bags use in the supermarket from fossil and bio-based plastic
- Fig. 7 : Balance sheet for a packaging film for interior applications from virgin material and recyclateEn ligne : https://drive.google.com/file/d/1qxgpl9qm4OUqRxD9IihIs_aFRV-qLDK0/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=33830
in KUNSTSTOFFE INTERNATIONAL > Vol. 110, N° 1 (01/2020) . - p. 11-15[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 21510 - Périodique Bibliothèque principale Documentaires Disponible L'Allemagne innove en matière de recyclage / H. Kaiser in CAOUTCHOUCS & PLASTIQUES, N° 750 (05/1996)
[article]
Titre : L'Allemagne innove en matière de recyclage Type de document : texte imprimé Auteurs : H. Kaiser, Auteur ; S. Kirsch, Auteur Année de publication : 1996 Article en page(s) : p. 47-50 Note générale : Bibliogr. Langues : Français (fre) Catégories : Matières plastiques -- Recyclage Index. décimale : 668.4 Plastiques, vinyles Résumé : Le producteur Hüls et la société Metallgesellschaft ont mis au point une unité-pilote destinée au recyclage des appareils ménagers électriques. Note de contenu : - Groupes de produits adaptés au procédé
- Essai-pilote de recyclage
- Traitement mécaniquePermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=24577
in CAOUTCHOUCS & PLASTIQUES > N° 750 (05/1996) . - p. 47-50[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 002572 - Périodique Bibliothèque principale Documentaires Disponible An experimental study on the properties of recycled high-density polyethylene / A. G. Toroslu in INTERNATIONAL POLYMER PROCESSING, Vol. 36, N° 5 (2021)
[article]
Titre : An experimental study on the properties of recycled high-density polyethylene Type de document : texte imprimé Auteurs : A. G. Toroslu, Auteur Année de publication : 2021 Article en page(s) : p. 557-563 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Alumine
Conduction électrique
Essais dynamiques
Matières plastiques -- Propriétés mécaniques
Matières plastiques -- Recyclage
Microscopie électronique à balayage
Polyéthylène haute densité
Thermocinétique
ViscositéIndex. décimale : 668.4 Plastiques, vinyles Résumé : Recycling of plastic materials has become more environmentally important than recycling of other materials. The most important problem during recycling is the presence of oil, dirt, dust and metal particles that are mixed with plastic materials. These mixtures can change their its mechanical and physical properties and it is quite costly to remove them completely. Removing iron alloy particles from plastic is possible by using the magnetic method. However, removing non-metallic materials requires extra processing. In this study, the use of recycled High-Density Polyethylene (rHDPE) without an expensive cleaning processes has been investigated. Different amounts of aluminium oxide (Al2O3) were added to High Density Polyethylene (HDPE) to simulate the effect of non-metallic material involved. The effect of these contamination rates on the mechanical and physical properties of HDPE was examined in detail. For this purpose, recyclable materials were produced by mixing rHDPE with 1%, to 7% Al2O3. The results show that up to 7% of the mixture has acceptable effects on the properties of HDPE. When the results of the experiments are examined, it is observed that there is a 3.74% change in the elastic modulus of the material. This means, that up to 7% non-metal contaminated rHDPE material can be used without any costly recycling process. Note de contenu : - Preparation of samples
- Injection parameters
- Scanning electron microscopy (sem)
- Tensile testing
- Melt flow index (mfi)
- Material hardness
- Electrical conductivity
- Thermal conductivityDOI : https://doi.org/10.1515/ipp-2020-4071 En ligne : https://drive.google.com/file/d/13X_MTOZianLe1z702Im_j6QqOCvhv5xX/view?usp=shari [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=36522
in INTERNATIONAL POLYMER PROCESSING > Vol. 36, N° 5 (2021) . - p. 557-563[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23735 - Périodique Bibliothèque principale Documentaires Disponible An irreplaceable additive / Ingo Sartorius in KUNSTSTOFFE INTERNATIONAL, Vol. 109, N° 6-7 (06-07/2019)
[article]
Titre : An irreplaceable additive : USe and recovery of TiO2 in plastics products Type de document : texte imprimé Auteurs : Ingo Sartorius, Auteur ; Ulrich Schlotter, Auteur Année de publication : 2019 Article en page(s) : p. 6-8 Langues : Anglais (eng) Catégories : Dioxyde de titane
Matières plastiques -- Additifs
Matières plastiques -- Recyclage
ProductionIndex. décimale : 668.4 Plastiques, vinyles Résumé : Every year, several million tons of titanium dioxide are produced worldwide and added to, among other things, plastics products as well as to paints and dyes, food, cosmetic products or medicines. The EU Commission is currently considering the classification of titanium oxide as a suspicious substance which may potentionally cause cancer. A current study provides well-founded data on the use and recovery of titanium dioxide in plastics processing and recycling. Note de contenu : - Detailed analysis in three steps
- Specialist interviews along the value chain
- TiO2 consumption in plastics applications and waste
- Assessment by market stakeholders
- Fig. 1 : The study has qualified i.a. waste streams with respect to their TiO2 content. Only post-consumer waster were considered
- Fig. 2 : Titanium dioxide use in plastics conversion in Germany [kt]
- Table 1 : Distribution of TiO2 in plastic wastes
- Table 2 : TiO2 containing wastes relevant for the study according to their waste code number (code numbers with * indicate hazardous wastes ; the totalEn ligne : https://drive.google.com/file/d/1mpW43xsm-gBBtX9j-iCoM1w2feIYu_97/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=32974
in KUNSTSTOFFE INTERNATIONAL > Vol. 109, N° 6-7 (06-07/2019) . - p. 6-8[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 21073 - Périodique Bibliothèque principale Documentaires Disponible Assessment of the PVC waste addition effect on the concrete mechanical performance / Mourad Boutlikht in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 33, N° 2 (04/2023)
[article]
Titre : Assessment of the PVC waste addition effect on the concrete mechanical performance Type de document : texte imprimé Auteurs : Mourad Boutlikht, Auteur ; Kamel Hebbache, Auteur ; Abdellah Douadi, Auteur ; Seifeddine Tabchouche, Auteur Année de publication : 2023 Article en page(s) : p. 85-94 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Analyse de variance En statistique, l'analyse de la variance (terme souvent abrégé par le terme anglais ANOVA : ANalysis Of VAriance) est un ensemble de modèles statistiques utilisés pour vérifier si les moyennes des groupes proviennent d'une même population. Les groupes correspondent aux modalités d'une variable qualitative (p. ex. variable : traitement; modalités : programme d'entrainement sportif, suppléments alimentaires ; placebo) et les moyennes sont calculés à partir d'une variable continue (p. ex. gain musculaire).
Ce test s'applique lorsque l'on mesure une ou plusieurs variables explicatives catégorielles (appelées alors facteurs de variabilité, leurs différentes modalités étant parfois appelées "niveaux") qui ont de l'influence sur la loi d'une variable continue à expliquer. On parle d'analyse à un facteur lorsque l'analyse porte sur un modèle décrit par un seul facteur de variabilité, d'analyse à deux facteurs ou d'analyse multifactorielle sinon. (Wikipedia)
Chlorure de polyvinyle
Contraintes (mécanique)
Granulométrie
Matériaux cimentaires -- Propriétés mécaniques
Matières plastiques -- Recyclage
Traction (mécanique)Index. décimale : 668.4 Plastiques, vinyles Résumé : The purpose of this study is to investigate the possibility of using the polyvinyl chloride (PVC) wastes as a concrete manufacturing material without pre-treatment. The purpose is also to contribute for restricting environmental pollution and exploitation of natural resources, through the stabilization and the solidification of PVC wastes in concrete. The aim of this experimental study is to evaluate experimentally the fresh and cured properties of PVC concrete based in comparison with ordinary concrete (OC). This study consists in collecting PVC waste, especially the used PVC pipes rejected in nature, and incorporate it into concrete by substitution of sand with different volume ratios (5%, 10% and 15%). In this study, two different shapes (Fiber and Fine) of PVC were considered. According to the test results, the addition of PVC waste in concrete as a partial replacement for natural sand conducts to decrease the workability of fresh concrete. It was noticed that, the concrete with PVC fiber shows a lower workability comparatively with fine PVC concrete. It was also observed that the PVC fiber improves the concrete compressive strength. It increases with increasing the replacement ratio of PVC waste. However, the increase in the ratio of fine PVC leads to a decrease in compressive strength. The better mechanical performance factor (MPF) was obtained for concrete mixes with high PVC fiber and moderate PVC fine ratios. The collected outcomes would contribute to helpful information for recycling PVC waste in concrete mixes. Note de contenu : - EXPERIMENTAL PROGRAM : Materials - Concrete mixtures
- RESULTS AND DISCUSSION : Workability for various concrete mixtures - Compressive strength - Split tensile strength
- STATISTICAL STUDY : The factorial experimental results - Mathematical models - Analysis of the compressive strength results
- Table 1 : Properties of coarse and fine aggregates
- Table 2 : Sieve analysis of coarse aggregate (8/16)
- Table 3 : Sieve analysis of coarse aggregate (16/25)
- Table 4 : Sieve analysis of fine aggregate (sand)
- Table 5 : Properties of Fine and Fiber PVCTable 6. Sieve analysis of fine PVC
- Table 7 : The used mixes details for a cubic meter of concrete
- Table 8 : Values of weight and slump for various mixtures of concrete
- Table 9 : Compressive strength of concrete mixtures
- Table 10 : Split tensile strength of concrete mixtures
- Table 11 : Fitting results summary
- Table 12 : Variance analysis (ANOVA) for derived modelsDOI : https://doi.org/10.18280/rcma.330203 En ligne : https://www.iieta.org/download/file/fid/96185 Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=39960
in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES > Vol. 33, N° 2 (04/2023) . - p. 85-94[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 24246 - Périodique Bibliothèque principale Documentaires Disponible Automatic melt filtration / Guido Radig in KUNSTSTOFFE INTERNATIONAL, Vol. 101, N° 2 (02/2011)
PermalinkAutomotive components made of packaging / Matthias Henning in KUNSTSTOFFE INTERNATIONAL, Vol. 110, N° 1 (01/2020)
PermalinkPermalinkBalancing environmental sustainability improvements and economic constraints / Corina Ross in CHEMICAL FIBERS INTERNATIONAL, (10/2021)
PermalinkBecoming part of the solution / Volker Scheel in KUNSTSTOFFE INTERNATIONAL, Vol. 107, N° 6-7 (06-07/2017)
PermalinkBetween new material mix and energy efficiency / Daniel Schwendemann in KUNSTSTOFFE INTERNATIONAL, Vol. 111, N° 8 (2021)
PermalinkBroyage, l'étape indispensable au recyclage in PLASTIQUES & ELASTOMERES MAGAZINE, N° 55-1 (01-02/2003)
PermalinkBroyage et séparation de matériaux polymériques sans fragilisation cryogénique. Approche fractographique du réacteur de division et transposition des techniques minéralurgiques de séparation / Abdelaziz Ait Amer / 1997
PermalinkBulky production scrap / Michael Heinzlreiter in KUNSTSTOFFE INTERNATIONAL, Vol. 106, N° 10 (10/2016)
PermalinkPermalinkPermalinkChemical modification in the extruder / Reinhard Bauer in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 12 (12/2012)
Permalink"Chemical recycling is not yet ready for commercial use" / Florian Streifinger in KUNSTSTOFFE INTERNATIONAL, Vol. 110, N° 1 (01/2020)
PermalinkCircular economy of PET waste by loop recycling - dream, fiction or reality ? / Ulrich Thiele in CHEMICAL FIBERS INTERNATIONAL, (10/2018)
PermalinkClosing the recycling loop / Michael Schlipf in KUNSTSTOFFE INTERNATIONAL, Vol. 104, N° 6 (06/2014)
PermalinkColleagues or competitors ? How chemical and mechanical recycling component each other / Klaus Lederer in KUNSTSTOFFE INTERNATIONAL, Vol. 112, N° 1 (2022)
PermalinkCollecter plus pour recycler plus / Fanny Perrin d'Arloz in PLASTIQUES & CAOUTCHOUCS MAGAZINE, N° 893 (05/2012)
PermalinkCombining the best of two polymer worlds / David Becker in KUNSTSTOFFE INTERNATIONAL, Vol. 106, N° 12 (12/2016)
PermalinkComment recycler les emballages multicouches / Céline Chevallier in PLASTIQUES & CAOUTCHOUCS MAGAZINE, N° 986 (12/2022)
PermalinkComment réduire l'empreinte environnementale ? / Amandine Ibled in GALVANO ORGANO, N° 802 (05/2011)
PermalinkCompatibilisants : Valoriser les déchets / B. Leseur in CAOUTCHOUCS & PLASTIQUES, N° 716 (09/1992)
PermalinkConception et modélisation d'un outil de coupe étagé pour le broyage des matières plastiques / Jamel Louati in MATERIAUX & TECHNIQUES, N° 10-11-12/04 (10-11-12/2004)
PermalinkCroissance et valorisation des matières plastiques à l'horizon 2020 / Michel Loubry in L'ACTUALITE CHIMIQUE, N° 422-423 (10-11/2017)
PermalinkPermalinkLa cryogénie au service du recyclage / Pramod Gujral in CAOUTCHOUCS & PLASTIQUES, N° 781 (11/1999)
PermalinkLes déchets plastiques utilisés comme compost / Claude Burdery in CAOUTCHOUCS & PLASTIQUES, N° 772 (11/1998)
PermalinkA la découverte du tissu recyclé de la Renault Zoé / Julie Thoin-Bousquié in USINE NOUVELLE (L'), N° 3666 (02/07/2020)
PermalinkLe défi des polymères en mélange / Françoise Guyonnet in PLASTIQUES & CAOUTCHOUCS MAGAZINE, N° 889 (11/2011)
PermalinkDegradable epoxy resin for sustainable carbon fibre composites / Bo Liang in JEC COMPOSITES MAGAZINE, N° 83 (08-09/2013)
PermalinkDeinking film using gentle wash process / Michal Prochazka in PLASTICS INSIGHTS, Vol. 113, N° 7 (2023)
PermalinkPermalinkDevelopment of leather cutting board from plastic waste / Fitsum Etefa Ahmed in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CXVI, N° 12 (12/2021)
PermalinkDevelopment of new type of plastics / Daisuke Sasaki in JEC COMPOSITES MAGAZINE, N° 136 (09-10/2020)
PermalinkDevelopment of a recycled polymer coating for steel corrosion protection : An adhesion study / F. Bourgés-Ficoteaux in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 70, N° 884 (09/1998)
PermalinkDéveloppement d'emballages barrière recyclables et/ou compostables / Thierry Falher in PLASTIQUES & CAOUTCHOUCS MAGAZINE, N° 985 (10-11/2022)
PermalinkLes différents plastiques recyclés passés au crible / Jérôme Piejak in PLASTIQUES & CAOUTCHOUCS MAGAZINE, N° 908 (12/2013)
PermalinkDigitalization instead of disruption / Jens P. Siepmann in KUNSTSTOFFE INTERNATIONAL, Vol. 108, N° 10 (10/2018)
PermalinkDigitalization optimizes the compounding process / Martina Walzer in PLASTICS INSIGHTS, Vol. 113, N° 9 (2023)
PermalinkPermalinkL'écoconception impose sa marque / Fabian Tubiana in PLASTIQUES & CAOUTCHOUCS MAGAZINE, N° 964 (03/2020)
PermalinkPermalinkEconomie circulaire. Le recyclage chimique monte en puissance / Alexandre Couto in INDUSTRIE & TECHNOLOGIES, N° 1029 (03/2020)
PermalinkEffect of feeding strategy on the mechanical properties of PP/recycled EPDM/PP-G-MA blends / P. Mahallati in INTERNATIONAL POLYMER PROCESSING, Vol. XXIX, N° 2 (05/2014)
PermalinkElectrifying lightweight design / Michael Müller in KUNSTSTOFFE INTERNATIONAL, Vol. 106, N° 1 (01-02/2016)
PermalinkL'emballage tire son épingle du jeu in PLASTIQUES & CAOUTCHOUCS MAGAZINE, N° 916 (11/2014)
PermalinkEngineering industry launches blue competence initiative in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 12 (12/2012)
PermalinkEnvironmental design / Hermann Onusseit in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 195, N° 4484 (01/2005)
PermalinkEnvironmental structural adhesives / Sally Sinai in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 200, N° 4555 (12/2010)
PermalinkPermalinkEvaluation of structures and morphologies of recycled PC/PET blends fabricated by high-shear kneading processing / A. Ishigami in INTERNATIONAL POLYMER PROCESSING, Vol. XXXII, N° 5 (11/2017)
PermalinkExploiting molecular mobility / Thomas Pichler in KUNSTSTOFFE INTERNATIONAL, Vol. 104, N° 2 (02/2014)
PermalinkPermalinkFeedstock recycling and pyrolysis of waste plastics / John Scheirs / Chichester [United Kingdom] : John Wiley & Sons Ltd (2006)
PermalinkPermalinkFlexible injection solutions with adapter plates / Adam Czech in KUNSTSTOFFE INTERNATIONAL, Vol. 113, N° 1 (2023)
PermalinkFlexible stays flexible / Verena Menz in KUNSTSTOFFE INTERNATIONAL, Vol. 103, N° 11 (11/2013)
PermalinkFood safe post consumer recyclate / Christoph Wöss in KUNSTSTOFFE INTERNATIONAL, Vol. 110, N° 5 (2020)
PermalinkPermalinkFor more climate protection in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 7 (07/2012)
PermalinkFrom bottle to blade / Emiliano Frulloni in JEC COMPOSITES MAGAZINE, N° 136 (09-10/2020)
PermalinkFrom fishing net to particle foam / Hans Axel Kristensen in KUNSTSTOFFE INTERNATIONAL, Vol. 110, N° 9 (2020)
PermalinkFrom plastic waste to a sustainable bicycle / Michael Pöpke in KUNSTSTOFFE INTERNATIONAL, Vol. 113, N° 3 (2023)
PermalinkFrom the sea to electronics / Sebastian Hoerold in KUNSTSTOFFE INTERNATIONAL, Vol. 110, N° 5 (2020)
PermalinkFrom waste collector to the plastic recycler / Reinhard Bauer in KUNSTSTOFFE INTERNATIONAL, Vol. 109, N° 3 (03/2019)
PermalinkUn futur au pluriel / Henri Saporta in EMBALLAGES MAGAZINE, N° 974 (11/2015)
PermalinkGetting recyclates into series production / James Mitchell in PLASTICS INSIGHTS, Vol. 113, N° 8 (2023)
PermalinkGlycol turns the extruder into a turbo / Franz-Xavier Keilbach in KUNSTSTOFFE INTERNATIONAL, Vol. 112, N° 1 (2022)
PermalinkGlycolytic depolymerization of PET waste using MP-diol and utilization of recycled product for UV-curable wood coating / Vandana Jamdar in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 15, N° 2 (03/2018)
PermalinkHigh-quality recycled plastics obtained directly from flakes / Thomas Köpplmayr in KUNSTSTOFFE INTERNATIONAL, Vol. 112, N° 1 (2022)
PermalinkHimont s'attaque au désassemblage / Francesco Forcucci in CAOUTCHOUCS & PLASTIQUES, N° 716 (09/1992)
PermalinkImpact environnemental & plasturgie. L'importance du recyclage et de l'ACV / Jacques Thébault in PLASTILIEN, N° 3 (04/2021)
PermalinkImproved process and component quality when using recycled materials / Stefan Kruppa in KUNSTSTOFFE INTERNATIONAL, Vol. 107, N° 11 (11/2017)
PermalinkImproved processing of recyclates / Anne-Laureen Lauven in KUNSTSTOFFE INTERNATIONAL, Vol. 112, N° 2 (2022)
PermalinkIncorporation de matières plastiques recyclées : comment obtenir la certification / Laetitia Goldszmidt in PLASTIQUES & CAOUTCHOUCS MAGAZINE, N° 988 (03-04/2023)
PermalinkIndispensables polymères in LA RECHERCHE, N° 458 (12/2011)
PermalinkInfeed granulator for thermoforming in KUNSTSTOFFE INTERNATIONAL, Vol. 103, N° 4 (04/2013)
PermalinkInnovative architectural design using composites as construction materials / Henri Chapelle in JEC COMPOSITES MAGAZINE, N° 85 (11-12/2013)
PermalinkInnover avec les matériaux polymères / Dominique Appert in PLASTILIEN, N° 106 (04/2014)
PermalinkIntégration de recyclé : une nouvelle approche expérimentale avec Varimos / Hikmet Houichi in PLASTIQUES & CAOUTCHOUCS MAGAZINE, N° 957-958 (06-07/2019)
PermalinkIntégrer la fin de vie in EMBALLAGES MAGAZINE, N° 951 (04/2013)
PermalinkPermalinkPermalinkPermalinkLong-chained and high-viscous / Benjamino R. Formisano in KUNSTSTOFFE INTERNATIONAL, Vol. 107, N° 12 (12/2017)
PermalinkMaîtriser la fin de vie des emballages à usage unique / Arnaud Littner in PLASTIQUES & CAOUTCHOUCS MAGAZINE, N° 973 (03/2021)
PermalinkMatières plastiques et environnement / Claude Duval / Paris : Dunod (2004)
PermalinkLes matières plastiques face aux défis de l'automobile / Carole Lembezat in PLASTIQUES & CAOUTCHOUCS MAGAZINE, N° 919 (03/2015)
PermalinkMechanical properties and fracture morphology of blends of PC with PMMA / Sungkyu Lee in INTERNATIONAL POLYMER PROCESSING, Vol. XXVII, N° 5 (11/2012)
PermalinkMelt filtration on the injection molding machine / Reinhard Bauer in KUNSTSTOFFE INTERNATIONAL, Vol. 103, N° 4 (04/2013)
PermalinkPermalinkMorphology, mechanical and thermal properties of recycled PC/ABS blends processed via vane extruder / Y. Q. Zhao in INTERNATIONAL POLYMER PROCESSING, Vol. XXIX, N° 2 (05/2014)
PermalinkNew from old / Ulrike Steigemann in KUNSTSTOFFE INTERNATIONAL, Vol. 101, N° 11 (11/2011)
PermalinkNew livery for SSP reactor / Hans Schnell in KUNSTSTOFFE INTERNATIONAL, Vol. 105, N° 1-2 (01-02/2015)
PermalinkNew technology for production of BCF yarn from recycled PET / Lassad Nasri in CHEMICAL FIBERS INTERNATIONAL, Vol. 67, N° 1 (03/2017)
PermalinkNew trends in composites and plastics recycling / Frédéric Ruch in JEC COMPOSITES MAGAZINE, N° 136 (09-10/2020)
Permalink