Accueil
Catégories
> Fer
FerVoir aussi
|
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
Iron as an alternative drier for curing of high-solid alkyd coatings / Barbara Pirš in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 12, N° 6 (11/2015)
[article]
Titre : Iron as an alternative drier for curing of high-solid alkyd coatings Type de document : texte imprimé Auteurs : Barbara Pirš, Auteur ; Bogdan Znoj, Auteur ; Saša Skale, Auteur ; Jožefa Zabret, Auteur ; Jerneja Godnjavec, Auteur ; Peter Venturini, Auteur Année de publication : 2015 Article en page(s) : p. 965-974 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Fer
Fourier, Spectroscopie infrarouge à transformée de
Polyalkydes
Revêtements:Peinture
Rhéologie
SiccatifsUn siccatif est une substance qui joue un rôle de catalyseur en accélérant le séchage ou durcissement (polymérisation) d'un matériau tel une huile ou une peinture à base d'huile (pour le bâtiment ou les artistes).
Spectroscopie d'impédance électrochimiqueIndex. décimale : 667.9 Revêtements et enduits Résumé : Alkyds are widely used polymers in the coating industry for decorative and industrial applications due to their low price, performance, diversity, and containment of renewable constituents. They have been of particular interest in research over the past decade owing to new legislative requirements focused on the reduction of volatile organic coatings (VOC) and the replacement of Cobalt (Co) driers. In the present work, the commercially accessible Fe (bispidon) drier and the Co (bis (2-ethylhexanoate)) drier were studied in high-solid (HS) alkyd coatings that are consistent with allowed VOC values as stipulated by actual EU legislation. Curing kinetic properties of the alkyd oxidation process were analyzed using FTIR spectroscopy. The influence of Fe and Co driers on crosslinking was further evaluated in terms of viscoelastic properties and surface hardness measurements. Finally, cured coating films were compared with the EIS method in order to determine the influence of driers on crosslinked polymer structures and pore resistance of HS alkyd coatings. We compared Fe and Co driers in HS long-oil alkyd coatings. Coatings with Fe drier showed comparable Final Drying Times but dissimilar crosslinking kinetic activity compared with the Co drier. Fe drier enable more uniformity through the entire thickness of the HS alkyd coating and consequently has lower diffusion of ions through the film. Note de contenu : - EXPERIMENTAL : Materials and sample preparation - analytical methods
- RESULTS AND DISCUSSION : Film formation characteristics - Chemical curing during film formation process - Physical properties of coating film - Electrochemical characteristics of cured coating filmDOI : 10.1007/s11998-015-9724-x En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-015-9724-x.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=24930
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 12, N° 6 (11/2015) . - p. 965-974[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 17585 - Périodique Bibliothèque principale Documentaires Disponible Nouveau traité de chimie minérale. tome XVII, 1er fascicule / Paul Pascal / Paris : Masson (1967)
Titre : Nouveau traité de chimie minérale. tome XVII, 1er fascicule : Fer Type de document : texte imprimé Auteurs : Paul Pascal, Directeur de publication, rédacteur en chef Editeur : Paris : Masson Année de publication : 1967 Importance : XXXIX-938 p. Présentation : ill. Format : 26 cm Note générale : Index - Bibliogr. Langues : Français (fre) Catégories : Chimie minérale
FerIndex. décimale : 546 Chimie minérale Résumé : TRIADE Fe, Co, Ni : Les éléments de transition (généralités) - Etats de valence ionique ou d'oxydation de la triade Fe, Co, Ni - Magnétisme des ions - Dérivés organométalliques / FER : propriétés physiques - Propriétés chimiques - Combinaisons du fer avec les autres éléments. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=216 Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 0446 546 PAS XVII-1 Monographie Bibliothèque principale Documentaires Disponible Organic–inorganic hybrid sol–gel coatings for metal corrosion protection : a review of recent progress / R. B. Figueira in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 12, N° 1 (01/2015)
[article]
Titre : Organic–inorganic hybrid sol–gel coatings for metal corrosion protection : a review of recent progress Type de document : texte imprimé Auteurs : R. B. Figueira, Auteur ; C. J. R. Silva, Auteur ; E. V. Pereira, Auteur Année de publication : 2015 Article en page(s) : p. 1-35 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Alliages
Anticorrosion
Cuivre
Fer
MagnésiumLe magnésium est l'élément chimique de numéro atomique 12, de symbole Mg.
Le magnésium est un métal alcalino-terreux. Il s’agit du neuvième élément le plus abondant de l'univers
. Il est le produit, dans de grandes étoiles vieillissantes, de l'addition séquentielle de trois noyaux d'hélium à un noyau carbo. Lorsque de telles étoiles explosent en tant que supernovas, une grande partie du magnésium est expulsé dans le milieu interstellaire où il peut se recycler dans de nouveaux systèmes stellaires. Le magnésium est le huitième élément le plus abondant de la croûte terrestreet le quatrième élément le plus commun de la Terre (après le fer, l'oxygène et le silicium), constituant 13 % de la masse de la planète et une grande partie du manteau de la planète. C'est le troisième élément le plus abondant dissous dans l'eau de mer, après le sodium et le chlore.
Les atomes de magnésium existent dans la nature uniquement sous forme de combinaisons avec d'autres éléments, où il présente invariablement l'état d'oxydation +2. L'élément pur est produit artificiellement par réduction ou électrolyse. Il est hautement réactif en poudre et en copeaux mais, laissé à l'air libre, il se revêt rapidement d'une mince couche d'oxyde étanche réduisant sa réactivité (passivation par oxydation). Le métal pur brûle aisément sous certaines conditions (en produisant une lumière brillante, blanche, éblouissante caractéristique). En mécanique il est utilisé principalement comme composant dans les alliages d'aluminium-magnésium (parfois appelés magnalium). Le magnésium est moins dense que l'aluminium et l'alliage est apprécié pour sa légèreté et sa résistance plus grande (mécanique et chimique). (Wikipedia)
Matériaux hybrides
Métaux -- Revêtements protecteurs
SiloxanesLes siloxanes sont une classe de composés du silicium dont la formule empirique est R2SiO, où R est un groupe radical qui peut être organique. Des exemples représentatifs sont [SiO(CH3)2]n (diméthylsiloxane) et [SiO(C6H5)2]n (diphénylsiloxane), où n est typiquement supérieur à 4. Ces composés peuvent être des hybrides organiques et inorganiques. Les chaînes organiques confèrent au composé des propriétés hydrophobes alors que la chaîne principale -Si-O-Si-O- est purement inorganique.
Le mot siloxane est dérivé de Silicium, Oxygène et alkane.
Des siloxanes peuvent être trouvés dans des produits tels que des cosmétiques, des déodorants, des enduits hydrophobes pour pare-brise, des peintures et certains savons.
Les siloxanes polymérisés (polysiloxanes) sont appelés silicones1,2.
Le siloxane est massivement utilisé dans l'industrie cosmétique (rouges à lèvre, conditionneurs et shampooings, déodorants, etc.).
Une application récente du Siloxane D5 (2001) a été trouvée dans le nettoyage à sec des textiles en remplacement du perchloroéthylène. Ce procédé est très répandu aux États-Unis et au Royaume-Uni. Il devient de plus en plus courant en Europe continentale dont la France, afin de promouvoir l'usage de procédés écologiques et respectueux de la santé humaine.
Sol-gel, ProcédéIndex. décimale : 667.9 Revêtements et enduits Résumé : This paper is a review of the most recent and relevant achievements (from 2001 to 2013) on the development of organic–inorganic hybrid (OIH) coatings produced by sol–gel-derived methods to improve resistance to oxidation/corrosion of different metallic substrates and their alloys. This review is focused on the research of OIH coatings based on siloxanes using the sol–gel process conducted at an academic level and aims to summarize the materials developed and identify perspectives for further research. The fundamentals of sol–gel are described, including OIH classification, the interaction with the substrate, their advantages, and limitations. The main precursors used in the synthesis of OIH sol–gel coatings for corrosion protection are also discussed, according to the metallic substrate used. Finally, a multilayer system to improve the resistance to corrosion is proposed, based on OIH coatings produced by the sol–gel process, and the future research challenges are debated. Note de contenu : - SOL-GEL PROCESS FUNDAMENTALS AND OIHs CLASSIFICATION :
- SOL-GEL COATINGS FOR METALS : Organic-inorganic hybrid (OIH) sol-gel coatings for corrosion protection - OIH coatings for corrosion protection of iron-based alloys - OIH coatings for corrosion protection of copper-based alloys - OIH coatings for corrosion protection for zinc-based alloys HDGS - OIH coatings for corrosion protection of magnesium-based alloys
- LIMITATIONS OF ORGANIC-INORGANIC HYBRID SOL-GEL COATINGS FOR CORROSION PROTECTION
- FUTURE AND RESEARCH CHALLENGES ON ORGANIC-INORGANIC HYBRID MATERIALS FOR CORROSION PROTECTIONDOI : 10.1007/s11998-014-9595-6 En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-014-9595-6.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=23204
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 12, N° 1 (01/2015) . - p. 1-35[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 16952 - Périodique Bibliothèque principale Documentaires Disponible Preparation and characterization of a phosphorous free and non-nitrogen antiscalant in industrial cooling systems / C. Fu in TENSIDE, SURFACTANTS, DETERGENTS, Vol. 48, N° 1/2010 (01-02/2011)
[article]
Titre : Preparation and characterization of a phosphorous free and non-nitrogen antiscalant in industrial cooling systems Type de document : texte imprimé Auteurs : C. Fu, Auteur ; Y. Zhou, Auteur ; J. Huang, Auteur ; H. Xie, Auteur ; G. Liu, Auteur ; W. Wu, Auteur ; W. Sun, Auteur Année de publication : 2011 Article en page(s) : p. 60-66 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Caractérisation
Dispersions et suspensions
Fer
Phosphate de calcium
PhosphoreIndex. décimale : 668.1 Agents tensioactifs : savons, détergents Résumé : A novel nonpolluting type of calcium phosphate and iron(III) antiscalant MCn was synthesized. The observation shows that MCn causes a disordered calcium phosphate. Furthermore, both calcium phosphate and iron(III) inhibition increase with increasing degree of polymerization of MCn from 5 to 13, and the dosage of MCn plays an important role on calcium phosphate and iron(III) inhibition. Inhibition mechanism is proposed the interactions between calcium or iron ions and polyethylene glycol (PEG) are the fundamental impetus to restrain the formation of the scale in cooling water systems. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=10674
in TENSIDE, SURFACTANTS, DETERGENTS > Vol. 48, N° 1/2010 (01-02/2011) . - p. 60-66[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 012778 - Périodique Bibliothèque principale Documentaires Disponible Preparation of metal chelating active packaging materials by laminated photografting / Zhuangsheng Lin in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 13, N° 2 (03/2016)
[article]
Titre : Preparation of metal chelating active packaging materials by laminated photografting Type de document : texte imprimé Auteurs : Zhuangsheng Lin, Auteur ; Eric A. Decker, Auteur ; Julie M. Goddard, Auteur Année de publication : 2016 Article en page(s) : p. 395-404 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Acide polyacrylique
Chélates
Copolymères greffés
Emballages en matières plastiques
Fer
Matériaux -- Propriétés barrières
polyacide hydroxamique
Polypropylène
Traîtements de surfaceIndex. décimale : 667.9 Revêtements et enduits Résumé : Active packaging materials with surface immobilized metal chelating ligands were prepared by laminated photografting technique. The resulting materials presented transition metal scavenging properties with potential application in non-migratory antioxidant active packaging materials. Photografting of functional polymer ligands is typically performed in an oxygen-free environment, requiring a nitrogen inerting step, which limits potential industrial scale-up. Laminated photografting eliminates the need for nitrogen inerting by sandwiching the monomer solution between base material and an oxygen barrier layer. In this study, we demonstrated the ability to synthesize metal chelating active packaging materials, previously prepared by standard batch photografting, using a laminated photografting technique. The polypropylene-graft-poly(acrylic acid) and polypropylene-graft-poly(hydroxamic acid) chelating films prepared by laminated photografting presented similar surface chemistry as those reported previously, as characterized by infrared spectroscopy, and presented ferric ion chelating capacity of 182 ± 29 and 89 ± 10 nmol/cm2, respectively, at pH 5.0. The reported laminated photografting represents a coating technology with potential for adaptation to roll-to-roll manufacture of metal chelating films on an industrial scale. Note de contenu : - EXPERIMENTAL METHODS AND MATERIALS : Materials - Surface modification - Surface characterization - Iron chelating capacity - Statistics
- RESULTS AND DISCUSSION : Surface characterization - Iron chelating capacityDOI : 10.1007/s11998-015-9767-z En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-015-9767-z.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=26123
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 13, N° 2 (03/2016) . - p. 395-404[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 17962 - Périodique Bibliothèque principale Documentaires Disponible Préparation et réactivité des films sol-gel TiO2 sur les alliages FeCrAl et estimation de l'énergie d'adhérence des couches d'alumines / R. Chegroune in MATERIAUX & TECHNIQUES, Vol. 101, N° 2 (2013)
PermalinkPrévention de l'altération de monuments historiques en pierre due à la corrosion d'armatures métalliques / Murielle Bach in L'ACTUALITE CHIMIQUE, N° 312-313 (10-11/2007)
PermalinkPermalinkPropriétés rhéologiques des fluides magnétorhéologiques / J. Claracq in LES CAHIERS DE RHEOLOGIE, Vol. XVI, N° 1 (10/1998)
PermalinkReaction of gelatin with Cr(III) Al(III) and Fe(III) : Investigation by spectrofluorometry / Chen Jiping in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 92, N° 6 (11-12/2008)
PermalinkRéactivité électrochimique d'oxydes mixtes divisés de fer(II) et de fer(III) incorporés dans une électrode à pâte de carbone à liant conducteur / Zaki Zaki Sharara / 1983
PermalinkPermalinkA semi-aza-crown-based chemosensor for colorimetric detection of iron(III) and iron(II) in aqueous media with large bathochromic shift in COLORATION TECHNOLOGY, Vol. 135, N° 2 (04/2019)
PermalinkA study of the microstructure, micro abrasive wear and corrosion resistance of HVOF-sprayed, FeSiNICr-based alloy coating deposited on grey cast iron-relevance to automotive applications / M. Shunmuga Priyan in SURFACE COATINGS INTERNATIONAL, Vol. 95, 4 (08/2012)
PermalinkThe characteristics of oxidized lactose-metal complexes and their interaction with collagen / Chen Hui in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 91, N° 5 (09-10/2007)
PermalinkThe effects of pulse plating variables on morphology and corrosion behavior of Zn–Fe alloy coatings / A. Roshanghias in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 9, N° 2 (03/2012)
PermalinkThe infuence of metal complex dye stability and dye interaction in aqueous solution on within-skin, within-pack and pack to pack colour variation / W. R. Dyson in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 63, N° 1 (01-02/1979)
PermalinkThe rapid determination of iron, chromium, zirconium and aluminium in leather / M. Kapel in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 63, N° 5 (09-10/1979)
PermalinkThe sonochemical decolorisation of textile azo dye CI Reactive Orange 127 / Celalettin Özdemir in COLORATION TECHNOLOGY, Vol. 127, N° 4 (2011)
PermalinkTreatment of textile dyeing wastewater by electrocoagulation using Fe and Al electrodes : optimisation of operating parameters using central composite design / Mehmet Kobya in COLORATION TECHNOLOGY, Vol. 130, N° 3 (06/2014)
Permalink