Accueil
Catégories
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
[article]
Titre : Quantifying haptics : Comparing the haptics and physical measurement of surfaces of wooden flooring Type de document : texte imprimé Auteurs : Gerhard Grüll, Auteur ; Igor Scotland, Auteur ; Irène Spitaler, Auteur ; Martin Teibinger, Auteur Année de publication : 2013 Article en page(s) : p. 96-99 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Analyse sensorielle
Bois
Confort
Microscopie électronique à balayage
Revêtements de sols
Rugosité
Température
ToucherIndex. décimale : 667.9 Revêtements et enduits Résumé : What are the factors that influence haptics and the comfortable feel of surfaces of the different surface properties of wooden floorings, particularly when the wood has been treated with oil or wax ? Results of the assessment by touch of the haptics and perceived temperature of different surfaces by test persons were compared to quantitative measurements of surface roughness and thermal properties. Note de contenu : - Measuring roughness with SEM
- Correlating the results of the test persons with the profilometry
- Temperature perception via hands and feet
- Untreated felt warmerEn ligne : https://drive.google.com/file/d/1D3iBFmyRJSVZ6yLeQpsJlahlwu8BMkCa/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=17717
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 3 (03/2013) . - p. 96-99[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 14777 - Périodique Bibliothèque principale Documentaires Disponible Reactive hot melts / Peter J. Bedwell in ADHESIVE TECHNOLOGY, Vol. 15, N° 1 (03/1998)
[article]
Titre : Reactive hot melts Type de document : texte imprimé Auteurs : Peter J. Bedwell, Auteur Année de publication : 1998 Langues : Anglais (eng) Catégories : Adhésifs thermofusibles
Collage
PrépolymèresUn pré-polymère ou prépolymère est un oligomère ou un polymère présentant des groupes réactifs qui lui permettent de participer à une polymérisation ultérieure et d’incorporer ainsi plusieurs unités monomères dans au moins une chaîne de la macromolécule finale.
Les pré-polymères peuvent être di-fonctionnels (c'est le cas des pré-polymères téléchéliques) ou plurifonctionnels. Dans ce dernier cas, ils sont utilisés pour la fabrication de polymères thermodurcissables par réticulation.
Rhéologie
Température
ViscositéIndex. décimale : 668.3 Adhésifs et produits semblables Résumé : The contuining demand for increased production speeds in most adhesive applications, coupled with the need to use materials that are less harmful to the environment - and still meet high-bonding specifications - means that reactive hot melts are fulfilling the needs of an expanding niche market. Note de contenu : - Reactive hot melts
- Application of reactive hot melts
- Expanding niche market
- Fig. 1 : Relationship between viscosity and temperature
- Fig. 2 : Schematic representation of conventional bonding process
- Fig. 3 : Schematic representation of reactive hot melt bonding process
- Fig. 4 : Formation of reactive prepolymer
- Fig. 5 : Reaction of prepolymer with moisture to form prepolymer
- Fig. 6 : Reaction of prepolymer with substrate
- Fig. 7 : Reactive hot melt propertiesPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=37384
in ADHESIVE TECHNOLOGY > Vol. 15, N° 1 (03/1998)[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 001979 - Périodique Bibliothèque principale Documentaires Disponible
[article]
Titre : Réticulation des finissages - partie 2 Type de document : texte imprimé Auteurs : Marie Avesque, Auteur Année de publication : 2020 Article en page(s) : p. 14-18 Langues : Français (fre) Catégories : Caractérisation
Carbodiimides
Cuirs et peaux -- Finition
Cuirs et peaux d'agneaux
Essais (technologie)
Essais de résilience
Essais dynamiques
Frottements (mécanique)
Isocyanates
Polyuréthanes
Réticulants
Réticulation (polymérisation)
TempératureIndex. décimale : 675 Technologie du cuir et de la fourrure Résumé : Dans "CTC" entreprise de juin 2019, nous avions présenté la partie théorique et chimique de la réticulation des finissages (polyuréthane et carbodiimide ou polyuréthane et isocyanate). Nous annoncions qu'une étude CTC était en cours afin de comprendre au mieux la réticulation et d'en étudier les conditions optimales en fonction des résines et réticulants utilisés.
Cet article présente les résultats obtenus lors d'essais effectués sur la plateforme tannerie de CTC. L'ensemble de ces essais ont été effectués sur un même lot de cuirs semi-finis (agneaux stain chrome teint en rouge).Note de contenu : - DESCRIPTION DES ESSAIS : Produits sélectionnés - Plan d'essais - Conditions fixes
- RESULTATS : Mode de présentation des résultats - Paramètre quantité - Paramètre température - Paramètre plaquage - Paramètre résine
- Fig. 1 : Réticulants et résines sélectionnés
- Fig. 2 : Exemple de tableau de variations (plan d'essais) pour couple 1
- Fig. 3 : Exemple de test de frottement humide pour le couple A
- Fig. 4 : Résultats des trois carbodiimides
- Fig. 5 : Résultats des deux isocyanates
- Fig. 6a et 6 b : Exemples de résultats
- Fig. 7 : Pourcentage d'amélioration en fonction des quantités de réticulants
- Fig. 8 : Pourcentage d'amélioration en fonction des températures
- Fig. 9 : Nombre de cuirs validés en fonction des températures
- Fig. 10 : Pourcentage d'amélioration en fonction du plaquage
- Fig. 11 : Pourcentage d'amélioration en fonction des PUEn ligne : https://drive.google.com/file/d/1OzTbW3dRxCbnMJM1ahQWTXsjv4ueBxSZ/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=34311
in CTC ENTREPRISES > (05-06/2020) . - p. 14-18[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 21796 - Périodique Bibliothèque principale Documentaires Disponible Rheological behaviour of alkali solubilized collagen from limed bovine split wastes / Chen Yihui in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 97, N° 5 (09-10/2013)
[article]
Titre : Rheological behaviour of alkali solubilized collagen from limed bovine split wastes Type de document : texte imprimé Auteurs : Chen Yihui, Auteur ; Li Guoyin, Auteur ; Jia Yun, Auteur Année de publication : 2013 Article en page(s) : p. 195-199 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Bases (chimie)
Collagène
Collagène -- Solubilité
Cuirs et peaux -- Déchets
Cuirs et peaux de veaux
Rhéologie
Rhéométrie
Solutions (chimie)
TempératureIndex. décimale : 675 Technologie du cuir et de la fourrure Résumé : The rheological behaviour of alkali solubilized collagen solutions (ASCS) from calf limed splits was modeled to investigate the effects of temperatures (25, 27.5, 30 and 32.5°C) and concentration (8, 10 and 15mg/m1) on its fluid type using viscometrical rheometry. ASCS were reconstructed by using a power-law mode) and exhibited the typical pseudoplastic behaviour with flow behaviour index values, n<1. n increased with increasing concentration but decreased with increasing temperature. The dynamic viscoelastic properties of ASCS were determined by means of oscillatory rheometry at different pH, concentrations and temperatures in the ranges 2.5 to 8, 5-15mg/nnl and 25-35°C, respectively. The values of storage modulus (G'), loss modulus (G") and complex viscosity (?*) decreased with increasing pH from 2.5 to 7, and then increased as pH increased further. Meanwhile, G', G", ?* and relaxation times increased with the increase of collagen concentration, but decreased with increasing temperature and behaved without regularity at 35°C. Note de contenu : - EXPERIMENTAL METHODS : Preparation of ASC - Preparation of ASC solutions - Rheological characterization of ASC solutions - Modelling of fluid flow behaviour using power law
- RESULTS AND DISCUSSION : Model of fluid flow behaviour using power law - Effects of concentration on dynamic rheological properties - Effects of the pH of ASC solution on dynamic rheological properties - Effects of temperature on dynamic rheological propertiesEn ligne : https://drive.google.com/file/d/1hQTDRjuARXTTocj-_biEyARqmu88BR0e/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=19567
in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC) > Vol. 97, N° 5 (09-10/2013) . - p. 195-199[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 15601 - Périodique Bibliothèque principale Documentaires Disponible Rheological characterization and thermal stability of different intrinsic viscosity poly(ethylene terephthalate) in air and nitrogen / S.-C. Chen in INTERNATIONAL POLYMER PROCESSING, Vol. XXXI, N° 3 (07/2016)
[article]
Titre : Rheological characterization and thermal stability of different intrinsic viscosity poly(ethylene terephthalate) in air and nitrogen Type de document : texte imprimé Auteurs : S.-C. Chen, Auteur ; X.-M. Zhang, Auteur ; M. Liu, Auteur ; J.-P. Ma, Auteur ; W.-X. Lu, Auteur ; W.-X. Chen, Auteur Année de publication : 2016 Article en page(s) : p. 292-300 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Analyse thermique
Caractérisation
Essais accélérés (technologie)
Groupement carboxyle
Matières plastiques -- Séchage
Poids moléculaires
Polyéthylène téréphtalate
Rhéologie
Stabilité thermique
Température
ViscositéIndex. décimale : 668.4 Plastiques, vinyles Résumé : Four PET samples of different intrinsic viscosity values based on diverse manufacturing processes were characterized for their linear viscoelasticity using a parallel plate rheometer. Thermal stability and frequency sweep experiments were performed in the melt state at 270 °C. The influences of drying temperature, testing atmosphere (air or nitrogen), and preparation (granules vs. samples cut from compression molded sheets) were investigated. Results indicated that a higher drying temperature promoted complex viscosity significantly and compression molded sheets generated irreversible structural changes in harsh conditions. The samples measured in air decreased because of thermo-oxidation degradation, whereas that in nitrogen unexpectedly increased slightly because of polycondensation without surface renewal. The role of carboxyl end group towards PET thermal stability was found to be influenced by the atmosphere. Note de contenu : - EXPERIMENTAL : Materials - Intrinsic viscosity tests - Carboxyl end group analysis - Thermal analysis - Molecular weight characterization - Rheological measurements
- RESULTS AND DISCUSSION : Performance analysis of PETs - Effect of drying on rheology behavior - Testing atmosphere - Processing PETs into sheets - IV analysis of residual PETs - Thermal stabilityDOI : 10.3139/217.3138 En ligne : https://drive.google.com/file/d/1vIbcKYjluJNrr003FVW-jzfU_SJyZ7pY/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=26641
in INTERNATIONAL POLYMER PROCESSING > Vol. XXXI, N° 3 (07/2016) . - p. 292-300[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 18175 - Périodique Bibliothèque principale Documentaires Disponible Rhéologie des fluides complexes / DEPEGEC (I.U.T. - Le Montet; Villers les Nancy cedex) / Villers les Nancy cedex : DEPEGEC (n.d.)
PermalinkRhéologie sous pression de polymères fondus contenant un agent moussant dissous / Christian Carrot
PermalinkSelf-reinforced thermoplastic composites / Hans-Peter Heim in KUNSTSTOFFE INTERNATIONAL, Vol. 104, N° 3 (03/2014)
PermalinkSimulation of dry spinning processes / Walter Arne in CHEMICAL FIBERS INTERNATIONAL, Vol. 70, N° 1 (03/2020)
PermalinkSimultaneous determination of arbutin and its decomposed product hydroquinone in whitening creams using high-performance liquid chromatography with photodiode array detection: effect of temperature and pH on decomposition / J. S. Jeon in INTERNATIONAL JOURNAL OF COSMETIC SCIENCE, Vol. 37, N° 6 (12/2015)
PermalinkSolutions micellaires rhéofluidifiantes : corrélations entre les propriétés rhéologiques et optiques. Influence de la température / C. Humbert in LES CAHIERS DE RHEOLOGIE, Vol. XVI, N° 1 (10/1998)
PermalinkPermalinkPermalinkSome ways lead to Rome, but some do not / Christopherus Bader in KUNSTSTOFFE INTERNATIONAL, Vol. 104, N° 6 (06/2014)
PermalinkStorage qualities of wet-blue leathers / Alan E. Russell in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 59 (Année 1975)
PermalinkPermalinkStudies of the application of biocolorant for leather dyeing using Monascus Purpureus / A. Tamil Selvi in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CXIII, N° 4 (04/2018)
PermalinkStudy of bonding formation between the filaments of PLA in FFF process / Achraf Kallel in INTERNATIONAL POLYMER PROCESSING, Vol. XXXIV, N° 4 (08/2019)
PermalinkStudy of the desorption of hydrolysed reactive dyes from cotton fabrics in an ethanol–water solvent system / Caiyun Hang in COLORATION TECHNOLOGY, Vol. 130, N° 2 (04/2014)
PermalinkStudy on the degreasing of sheepskin by subcritical CH2Cl2 / Shanshan Yu in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 105, N° 2 (03-04/2021)
Permalink