Accueil
Détail de l'auteur
Auteur Christian Hopmann
Commentaire :
- RWTH Aachen - Germany
- Institute of Plastics Processing (IKV) - Aachen - Germany
|
Documents disponibles écrits par cet auteur
Ajouter le résultat dans votre panier Affiner la recherche
Numerical prediction of barrier properties / Christian Hopmann in KUNSTSTOFFE INTERNATIONAL, Vol. 105, N° 11 (11/2015)
[article]
Titre : Numerical prediction of barrier properties : Integrative simulation shortens development time and cost of PET bottles Type de document : texte imprimé Auteurs : Christian Hopmann, Auteur ; Benjamin Twardowski, Auteur Année de publication : 2015 Article en page(s) : p. 34-37 Langues : Anglais (eng) Catégories : Analyse numérique
Bouteilles en matières plastiques
Matériaux -- Propriétés barrières
Oxygène
Perméation
Polyéthylène téréphtalateIndex. décimale : 668.4 Plastiques, vinyles Résumé : Bottles made of polyethylene terephthalate (PET) are increasingly used in the bottling of oxygen-sensitive products with high barrier requirements. This trend is especially evident on the fruit juice shelves of supermarkets. Due to the large amount of time and effort needed for the experimental determination of a bottle’s O2 barrier properties, a numerical approach was investigated with the aim of faster bottle development. Note de contenu : - O2 permeation through PET
- Stretch ratio-dependent barrier properties
- Numerical calculation of the barrier properties
- Application on a PET bottleEn ligne : https://drive.google.com/file/d/1s3i2szqe1PCVuOQo-um-KvwM1b7URSnU/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=24983
in KUNSTSTOFFE INTERNATIONAL > Vol. 105, N° 11 (11/2015) . - p. 34-37[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 17618 - Périodique Bibliothèque principale Documentaires Disponible Out of the shadow into the light / Christian Hopmann in KUNSTSTOFFE INTERNATIONAL, Vol. 112, N° 1 (2022)
[article]
Titre : Out of the shadow into the light : Part 7 of the Series : How the digital shadow enlightens real processes in the PIC 4.0 Type de document : texte imprimé Auteurs : Christian Hopmann, Auteur ; Pascal Bibow, Auteur Année de publication : 2022 Article en page(s) : p. 6-8 Langues : Anglais (eng) Catégories : Données
Industrie 4.0Le concept d’Industrie 4.0 correspond à une nouvelle façon d’organiser les moyens de production : l’objectif est la mise en place d’usines dites "intelligentes" ("smart factories") capables d’une plus grande adaptabilité dans la production et d’une allocation plus efficace des ressources, ouvrant ainsi la voie à une nouvelle révolution industrielle. Ses bases technologiques sont l'Internet des objets et les systèmes cyber-physiques.
Numérisation
Ombre numérique
Presses à injecter
Simulation par ordinateurIndex. décimale : 668.4 Plastiques, vinyles Résumé : The digital shadow is the core concept of the Cluster of Excellence "Internet of Production" at RWTH Aachen University. It represents the data trace of an asset to describe its real behavior. In the Plastics Innovation Center 4.0 (PIC 4.0), digital shadows, e.g. the data trace of a sensor, are used to optimize processes taking into account real behavior and to determine simulation quality. Note de contenu : - Testbeds create use-case-related digital shadows
- Simulation, machine and mold provide different digital shadows
- The digital shadow brings clarity
- User-friendly process setup
- Fig. 1 : Data traces of the injection molding machine about the screw acceleration, from simulation about the flow-front-velocity and from sensors about the real filling-behavior exemplary for a honeycomb-structured part
- Fig. 2 : The interconnection of data traces from simulation and machine enables further extension of optimization strategies with respect to injection profiles at an injection molding machineEn ligne : https://drive.google.com/file/d/1vonx-b1NPzla4rvgNCDMjPIVwg5bcWTl/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=37201
in KUNSTSTOFFE INTERNATIONAL > Vol. 112, N° 1 (2022) . - p. 6-8[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23221 - Périodique Bibliothèque principale Documentaires Disponible Plastic automobile windows / Christian Hopmann in KUNSTSTOFFE PLAST EUROPE, Vol. 95, N° 2/2005 (02/2005)
[article]
Titre : Plastic automobile windows Type de document : texte imprimé Auteurs : Christian Hopmann, Auteur ; Sebastian Göbel, Auteur ; Jan Forster, Auteur Année de publication : 2005 Article en page(s) : p. 22-27 Note générale : Bibliogr. Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Process technology - Plastic is finding increasing use as a replacement for glass in automobile windows. An extremely dynamic market is developing, but one that places special requirements on materials, designs and production techniques. Success depends on an efficient logistical chain that addresses the product-specific requirements and the complex manufacturing processes. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=7531
in KUNSTSTOFFE PLAST EUROPE > Vol. 95, N° 2/2005 (02/2005) . - p. 22-27[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 000132 - Périodique Bibliothèque principale Documentaires Disponible Plastic optics in multiple layers / Christian Hopmann in KUNSTSTOFFE INTERNATIONAL, Vol. 104, N° 6 (06/2014)
[article]
Titre : Plastic optics in multiple layers : The Institute of Plastics Processing (IKV) researched the economic multilayer injection molding of thick-walled optical components Type de document : texte imprimé Auteurs : Christian Hopmann, Auteur ; Malte Röbig, Auteur ; Paul Walach, Auteur Année de publication : 2014 Article en page(s) : p. 40-43 Langues : Anglais (eng) Catégories : Couches épaisses
Matériel optique
Matières plastiques -- Moulage par injection
Structures multicouchesIndex. décimale : 668.4 Plastiques, vinyles Résumé : The molding of thick-walled optical components made of plastics is not only a technical challenge. Until now, there is no economic production method for these precision components. A new option is the approach to produce thick-walled lenses in a multilayered structure. As a result the cycle time can be shortened significantly and production processes become more economical. Note de contenu : - Fundamentals of multilayer injection molding
- Mold technology for the multilayer principle
- Bond strength and optical quality of the multilayer injection moldingEn ligne : https://drive.google.com/file/d/1Xbzd4lbC9UFjKaildg9N-I0vHHHCY4jQ/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=21626
in KUNSTSTOFFE INTERNATIONAL > Vol. 104, N° 6 (06/2014) . - p. 40-43[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 16367 - Périodique Bibliothèque principale Documentaires Disponible Plastics industry 4.0 / Christian Hopmann / Munchen [Germany] : Hanser (2021)
Titre : Plastics industry 4.0 : Potentials and applications in plastics technology Type de document : texte imprimé Auteurs : Christian Hopmann, Auteur ; Mauritius Schmitz, Auteur Editeur : Munchen [Germany] : Hanser Année de publication : 2021 Importance : XIII-303 p. Présentation : ill. Format : 25 cm ISBN/ISSN/EAN : 978-1-56990-796-2 Prix : 100 E Note générale : Index - Bibliogr. Langues : Anglais (eng) Catégories : Automatisation
Industrie 4.0Le concept d’Industrie 4.0 correspond à une nouvelle façon d’organiser les moyens de production : l’objectif est la mise en place d’usines dites "intelligentes" ("smart factories") capables d’une plus grande adaptabilité dans la production et d’une allocation plus efficace des ressources, ouvrant ainsi la voie à une nouvelle révolution industrielle. Ses bases technologiques sont l'Internet des objets et les systèmes cyber-physiques.
Internet des objetsL'Internet des objets représente l'extension d'Internet à des choses et à des lieux du monde physique. Alors qu'Internet ne se prolonge habituellement pas au-delà du monde électronique, l'internet des objets (IdO, ou IoT pour Internet of Things en anglais) représente les échanges d'informations et de données provenant de dispositifs présents dans le monde réel vers le réseau Internet. L'internet des objets est considéré comme la troisième évolution de l'Internet, baptisée Web 3.0 (parfois perçu comme la généralisation du Web des Objets mais aussi comme celle du Web sémantique) qui fait suite à l'ère du Web Social. L'internet des objets est en partie responsable de l'accroissement du volume de données générées sur le réseau, à l'origine du Big Data. L'internet des objets revêt un caractère universel pour désigner des objets connectés aux usages variés, dans le domaine de la e-santé, de la domotique ou du Quantified Self.
Matières plastiques -- Applications industrielles
Matières plastiques -- IndustrieIndex. décimale : 668.4 Plastiques, vinyles Résumé : "Plastics Industry 4.0" provides a sophisticated insight into the development of the plastics industry in terms of digitalization and Industry 4.0, i.e. the Fourth Industrial Revolution. The background to these increasingly important topics is discussed along with provision of the prerequisite knowledge regarding process complexity and modeling as well as data acquisition to build the foundation of data driven digital processes. Furthermore, the facets of so-called cyber-physical systems including their key components and interfaces are discussed and illustrated using industrial application as well as scientific use cases.
Aimed at decision makers in the plastics industry, engineers in industry, including those in R&D and process and product development, as well as researchers and students in universities, this book provides the inspiration to connect with Plastics Industry 4.0, and thereby stimulate innovation in companies, processes, products, and research.Note de contenu : - 1. INTRODUCTION : Potentials and benefits of industry 4.0 - Challenges for successful implementation of industry 4.0
- 2. DATA ACQUISITION AND PROCESS MONITORING AS ENABLER FOR INDUSTRY 4.0 : The necessity of data acquisition - Gaining insights into the process - Data acquisition methods - The different types of quality control
- 3. CYBER-PHYSICAL SYSTEMS : Computer integrated manufacturing as conceptual foundation for cyber-physical production systems - CPPS in plastic sprocessing - Communication capability of CPPS components in injection molding - Planning and realizing a CPPS in plastics processing
- 4. MODELS AND ARTIFICIAL INTELLIGENCE : Model quality - Three different categories of models
- 5. GLOBAL CONNECTIVITY : Data availability - Data management - IT infrastructure - Machine and data interfaces - Data systems
- 6. DIGITAL ENGINEERING : Introduction - Process simulation - Result analysis and mapping - Part simulation - Artificial neural networks in virtual process development
- 7. COMPLEX VALUE CHAIN : Introduction to complex value chains - Shop floor management - Examples of complex value chains in plastics processing
- 8. ASSISTANT SYSTEMS : Requirements and functionalities regarding assistant systems - Simulation-based assistance for process setup - Predictive maintenance - Augmented reality and virtual reality as visual support - Commercially available toolsPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=36966 Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23205 668.4 HOP Monographie Bibliothèque principale Documentaires Disponible Polymer stents / Christian Hopmann in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 2 (02/2012)
PermalinkPotential solutions for the industrialization of FRP / Rainer Dahlmann in KUNSTSTOFFE INTERNATIONAL, Vol. 103, N° 10 (10/2013)
PermalinkPermalinkA practicable way to produce continuous fiber-reinforced hollow articles / Christian Hopmann in KUNSTSTOFFE INTERNATIONAL, Vol. 104, N° 4 (04/2014)
PermalinkPrecise prediction of the deformation of inserts / Christian Hopmann in KUNSTSTOFFE INTERNATIONAL, Vol. 104, N° 2 (02/2014)
PermalinkPrecise process control with InjectiX / Katharina Hornberg in KUNSTSTOFFE INTERNATIONAL, Vol. 113, N° 3 (2023)
PermalinkPrecision injection-compression molding / Christian Hopmann in KUNSTSTOFFE INTERNATIONAL, Vol. 103, N° 7 (07/2013)
PermalinkPredicting part properties precisely / Christian Hopmann in KUNSTSTOFFE INTERNATIONAL, Vol. 101, N° 7 (07/2011)
PermalinkProcess chain for the production of hybrid medical products / Moritz Mascher in KUNSTSTOFFE INTERNATIONAL, Vol. 112, N° 3 (2022)
PermalinkProcess control in injection moulding / Walter Michaeli in KUNSTSTOFFE PLAST EUROPE, Vol. 94, N° 1/2004 (01/2004)
PermalinkProcess-optimized hybrid yarns for the fiber-spraying process / Christina Scheffler in TECHNICAL TEXTILES, Vol. 66, N° 1 (2023)
PermalinkProcess-optimized hybrid yarns for the fiber-spraying process / Christina Scheffler in MAN-MADE FIBERS INTERNATIONAL, Vol. 73, N° 2 (2023)
PermalinkProcess reliability with projectile / Christian Hopmann in KUNSTSTOFFE INTERNATIONAL, Vol. 103, N° 12 (12/2013)
PermalinkProcess set-up through machine learning / Christian Hopmann in KUNSTSTOFFE INTERNATIONAL, Vol. 108, N° 6 (06-07/2018)
PermalinkPermalink