Accueil
Catégories
> Aluminium
L'aluminium est un élément chimique, de symbole Al et de numéro atomique 13. C’est un métal pauvre, malléable, de couleur argent, qui est remarquable pour sa résistance à l’oxydation13 et sa faible densité. C'est le métal le plus abondant de l'écorce terrestre et le troisième élément le plus abondant après l'oxygène et le silicium ; il représente en moyenne 8 % de la masse des matériaux de la surface solide de notre planète. L'aluminium est trop réactif pour exister à l'état natif dans le milieu naturel : on le trouve au contraire sous forme combinée dans plus de 270 minéraux différents, son minerai principal étant la bauxite, où il est présent sous forme d’oxyde hydraté dont on extrait l’alumine. Il peut aussi être extrait de la néphéline, de la leucite, de la sillimanite, de l'andalousite et de la muscovite.
L'aluminium métallique est très oxydable, mais est immédiatement passivé par une fine couche d'alumine Al2O3 imperméable de quelques micromètres d'épaisseur qui protège la masse métallique de la corrosion. On parle de protection cinétique, par opposition à une protection thermodynamique, car l’aluminium reste en tout état de cause très sensible à l'oxydation. Cette résistance à la corrosion et sa remarquable légèreté en ont fait un matériau très utilisé industriellement. L'aluminium est un produit industriel important, sous forme pure ou alliée, notamment dans l'aéronautique, les transports et la construction. Sa nature réactive en fait également un catalyseur et un additif dans l'industrie chimique ; il est ainsi utilisé pour accroître la puissance explosive du nitrate d'ammonium. Aluminium
Commentaire :
L'aluminium est un élément chimique, de symbole Al et de numéro atomique 13. C’est un métal pauvre, malléable, de couleur argent, qui est remarquable pour sa résistance à l’oxydation13 et sa faible densité. C'est le métal le plus abondant de l'écorce terrestre et le troisième élément le plus abondant après l'oxygène et le silicium ; il représente en moyenne 8 % de la masse des matériaux de la surface solide de notre planète. L'aluminium est trop réactif pour exister à l'état natif dans le milieu naturel : on le trouve au contraire sous forme combinée dans plus de 270 minéraux différents, son minerai principal étant la bauxite, où il est présent sous forme d’oxyde hydraté dont on extrait l’alumine. Il peut aussi être extrait de la néphéline, de la leucite, de la sillimanite, de l'andalousite et de la muscovite.
L'aluminium métallique est très oxydable, mais est immédiatement passivé par une fine couche d'alumine Al2O3 imperméable de quelques micromètres d'épaisseur qui protège la masse métallique de la corrosion. On parle de protection cinétique, par opposition à une protection thermodynamique, car l’aluminium reste en tout état de cause très sensible à l'oxydation. Cette résistance à la corrosion et sa remarquable légèreté en ont fait un matériau très utilisé industriellement. L'aluminium est un produit industriel important, sous forme pure ou alliée, notamment dans l'aéronautique, les transports et la construction. Sa nature réactive en fait également un catalyseur et un additif dans l'industrie chimique ; il est ainsi utilisé pour accroître la puissance explosive du nitrate d'ammonium. Voir aussi
|
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
Oxidising degradation of Valonia extract and utilisation of the products. Part 2. Combination tannages of degraded product using 10% H2O2 with Cr(III) and AI(III) / Bi Shi in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 85, N° 1 (01-02/2001)
[article]
Titre : Oxidising degradation of Valonia extract and utilisation of the products. Part 2. Combination tannages of degraded product using 10% H2O2 with Cr(III) and AI(III) Type de document : texte imprimé Auteurs : Bi Shi, Auteur ; Ying Di, Auteur ; Lijiang Song, Auteur Année de publication : 2001 Article en page(s) : p. 19-23 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Aluminium L'aluminium est un élément chimique, de symbole Al et de numéro atomique 13. C’est un métal pauvre, malléable, de couleur argent, qui est remarquable pour sa résistance à l’oxydation13 et sa faible densité. C'est le métal le plus abondant de l'écorce terrestre et le troisième élément le plus abondant après l'oxygène et le silicium ; il représente en moyenne 8 % de la masse des matériaux de la surface solide de notre planète. L'aluminium est trop réactif pour exister à l'état natif dans le milieu naturel : on le trouve au contraire sous forme combinée dans plus de 270 minéraux différents, son minerai principal étant la bauxite, où il est présent sous forme d’oxyde hydraté dont on extrait l’alumine. Il peut aussi être extrait de la néphéline, de la leucite, de la sillimanite, de l'andalousite et de la muscovite.
L'aluminium métallique est très oxydable, mais est immédiatement passivé par une fine couche d'alumine Al2O3 imperméable de quelques micromètres d'épaisseur qui protège la masse métallique de la corrosion. On parle de protection cinétique, par opposition à une protection thermodynamique, car l’aluminium reste en tout état de cause très sensible à l'oxydation. Cette résistance à la corrosion et sa remarquable légèreté en ont fait un matériau très utilisé industriellement.
L'aluminium est un produit industriel important, sous forme pure ou alliée, notamment dans l'aéronautique, les transports et la construction. Sa nature réactive en fait également un catalyseur et un additif dans l'industrie chimique ; il est ainsi utilisé pour accroître la puissance explosive du nitrate d'ammonium.
Chrome
Cuirs et peaux -- Propriétés physiques
Liqueurs de tannage -- Analyse
Oxydation
Résistance à la transpiration
Tannage combinéLe tannage combiné se dit des tannages qui allient deux familles ou genre de tannage pour obtenir un résultat additionnant les qualités complémentaires des tannins mis en œuvre par exemple Chrome-Végétal ou Chrome-Synthétique
Tannage minéralTannage dans lequel interviennent différents minéraux. Le plus répandu est le tannage aux sels de chrome, mais aussi à l’aluminium
Tannage végétal
Température de retrait
Valonia et constituantsValonia est un genre d'algues vertes de la famille des Valoniaceae. La taille d'une seule cellule pluri-nucléée peut atteindre 2 cm chez certaines espèces. (Wikipedia)Index. décimale : 675.2 Préparation du cuir naturel. Tannage Résumé : Trials described in this paper showed that Perval-10, the oxidised degradation product of valonia extract using 10 % H2O2(w/w), had a synergistic effect with Cr(III). The combination tannages using 5 7 % Perval-10 and 1.0-1.5 % Cr2O3 produced leather with shrinkage temperatures above 100°C, higher than that of the corresponding chrome tannage and a combination tannage using 15 % valonia extract. The synergistic reaction of Perval-10 and Al(III) was not as effective as with Cr(III), but still produced leather with a shrinkage temperature above 100°C, when 7 % Perval-10 was used. The tanning sequence in combination tannages using Perval-10 is not critical, perhaps due to its moderate astringency and rapid penetration rate. The vegetable tanned characterer of leathers tanned by combination tannages using Perval-10 was largely eliminated, so that the tannages are suitable for producint quality leathers similar to a chrome tannage. Note de contenu : - EXPERIMENTAL PROCEDURES : 1) Vegetable-Cr (III) combination tannage - 2) Cr(III)-vegetable combination tannage - 3) Vegetable-Al(III) combination tannage
- DETERMINATIONS OF Cr2O3 CONTENTS IN SPENT TANNING LIQUORS AND PHYSICAL PROPERTIES OF LEATHERS
- RESULTS AND DISCUSSION :
- Table 1 : Shrinkage temperature ( C) of leather in vegetable compound-Cr(III) combination tannage
- Table 2 : Filling property (%) and grain feature of oxidised valonia-Cr(lll) combination tannage
- Table 3 : Shrinkage temperature ( C) of leather in Cr( III )-Perval-10 combination tannage
- Table 4 : Filling property (%) and features of leather in Cr(lll)-Perval-10 combination tannage
- Table 5 : Contents (g/l) of Cr2O3 in waste float of combination tannage
- Table 6 : Physical properties of leathers of combination tannages
- Table 7 : Perspiration resistance of leathers of combination tannages
- Table 8 : Shrinkage temperature ( C) of tannin compound-AI(III) combination tannageEn ligne : https://drive.google.com/file/d/1eWaszcdmTeLeVu8OO7t-FeQ5vT9I-HJG/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=40590
in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC) > Vol. 85, N° 1 (01-02/2001) . - p. 19-23[article]Oxidized maltodextrin : A novel ligand for aluminum-zirconium complex tanning / Xueru Guo in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CXVI, N° 5 (05/2021)
[article]
Titre : Oxidized maltodextrin : A novel ligand for aluminum-zirconium complex tanning Type de document : texte imprimé Auteurs : Xueru Guo, Auteur ; Yue Yu, Auteur ; Ya-Nan Wang, Auteur ; Bi Shi, Auteur Année de publication : 2021 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Aluminium L'aluminium est un élément chimique, de symbole Al et de numéro atomique 13. C’est un métal pauvre, malléable, de couleur argent, qui est remarquable pour sa résistance à l’oxydation13 et sa faible densité. C'est le métal le plus abondant de l'écorce terrestre et le troisième élément le plus abondant après l'oxygène et le silicium ; il représente en moyenne 8 % de la masse des matériaux de la surface solide de notre planète. L'aluminium est trop réactif pour exister à l'état natif dans le milieu naturel : on le trouve au contraire sous forme combinée dans plus de 270 minéraux différents, son minerai principal étant la bauxite, où il est présent sous forme d’oxyde hydraté dont on extrait l’alumine. Il peut aussi être extrait de la néphéline, de la leucite, de la sillimanite, de l'andalousite et de la muscovite.
L'aluminium métallique est très oxydable, mais est immédiatement passivé par une fine couche d'alumine Al2O3 imperméable de quelques micromètres d'épaisseur qui protège la masse métallique de la corrosion. On parle de protection cinétique, par opposition à une protection thermodynamique, car l’aluminium reste en tout état de cause très sensible à l'oxydation. Cette résistance à la corrosion et sa remarquable légèreté en ont fait un matériau très utilisé industriellement.
L'aluminium est un produit industriel important, sous forme pure ou alliée, notamment dans l'aéronautique, les transports et la construction. Sa nature réactive en fait également un catalyseur et un additif dans l'industrie chimique ; il est ainsi utilisé pour accroître la puissance explosive du nitrate d'ammonium.
Croûte (cuir)On entend par "cuir en croûte" des cuirs ayant subi les opérations jusqu'au tannage, à l'exclusion de toute opération de corroyage ou de finissage, mais qui, par opposition aux wet-blue ont été séchés.
Cuirs et peaux -- Propriétés physiques
Maltodextrine
Oxydation
Poids moléculaires
Post-tannage
Taille des particules
Tannage minéralTannage dans lequel interviennent différents minéraux. Le plus répandu est le tannage aux sels de chrome, mais aussi à l’aluminium
ZirconiumIndex. décimale : 675 Technologie du cuir et de la fourrure Résumé : Hydrogen peroxide (H2O2) oxidized maltodextrin was prepared as the ligand for aluminum–zirconium complex tanning. The effects of catalyst dosage, initiation temperature, and H2O2 dosage on maltodextrin oxidation were investigated. FT-IR analysis demonstrated that carboxyl groups were successfully introduced into oxidized maltodextrin. The carboxyl content and degradation degree of oxidized maltodextrin increased with the increase of H2O2 dosage. Maltodextrin oxidized by 40% H2O2 and 0.015% Cu–Fe catalyst at an initiation temperature of 70°C (OD-40) with moderate carboxyl group (6.75 mmol/g) and molecular weight (Mw 450) promoted the penetration and fixation of aluminum–zirconium salts in leather and showed better tanning performance, such as hydrothermal stability and porosity of leather, than traditional citric acid ligand. Note de contenu : - EXPERIMENTAL : Materials - Preparation of oxidized maltodextrin - Determination of decomposition rate of H2O2 - Determination of carboxyl content - Determination of colority - Fourier Transform Infrared (FT-IR) spectroscopy analysis - Determination of molecular weight and particle size - Tanning trials
- RESULTS AND DISCUSSION : Effect of catalyst dosage on maltodextrin oxidation - Effect of initiation temperature on maltodextrin oxidation - Effect of H2O2 dosage on maltodextrin oxidation - Tanning performance
- Table 1 : AlZr complex tanning process for cattle hide
- Table 2 : Post-tanning process
- Table 3 : Properties of tanned leather
- Table 4 : Physical properties of crust leatherDOI : https://doi.org/10.34314/jalca.v116i5.4293 En ligne : https://drive.google.com/file/d/1HVgMS3-lKqGrvz4WJbsKSv7H_dpO-003/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=35758
in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA) > Vol. CXVI, N° 5 (05/2021)[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 22726 - Périodique Bibliothèque principale Documentaires Disponible Oxidizing degradation of Valonia extract and utilization of the products - Part 3 : Auxiliary tanning effects of degraded producs using 20% and 30% H202 / Ying Di in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 85, N° 5 (09-10/2001)
[article]
Titre : Oxidizing degradation of Valonia extract and utilization of the products - Part 3 : Auxiliary tanning effects of degraded producs using 20% and 30% H202 Type de document : texte imprimé Auteurs : Ying Di, Auteur ; Bi Shi, Auteur ; Lijiang Song, Auteur ; Qiaoe Wang, Auteur Année de publication : 2001 Article en page(s) : p. 171-174 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Aluminium L'aluminium est un élément chimique, de symbole Al et de numéro atomique 13. C’est un métal pauvre, malléable, de couleur argent, qui est remarquable pour sa résistance à l’oxydation13 et sa faible densité. C'est le métal le plus abondant de l'écorce terrestre et le troisième élément le plus abondant après l'oxygène et le silicium ; il représente en moyenne 8 % de la masse des matériaux de la surface solide de notre planète. L'aluminium est trop réactif pour exister à l'état natif dans le milieu naturel : on le trouve au contraire sous forme combinée dans plus de 270 minéraux différents, son minerai principal étant la bauxite, où il est présent sous forme d’oxyde hydraté dont on extrait l’alumine. Il peut aussi être extrait de la néphéline, de la leucite, de la sillimanite, de l'andalousite et de la muscovite.
L'aluminium métallique est très oxydable, mais est immédiatement passivé par une fine couche d'alumine Al2O3 imperméable de quelques micromètres d'épaisseur qui protège la masse métallique de la corrosion. On parle de protection cinétique, par opposition à une protection thermodynamique, car l’aluminium reste en tout état de cause très sensible à l'oxydation. Cette résistance à la corrosion et sa remarquable légèreté en ont fait un matériau très utilisé industriellement.
L'aluminium est un produit industriel important, sous forme pure ou alliée, notamment dans l'aéronautique, les transports et la construction. Sa nature réactive en fait également un catalyseur et un additif dans l'industrie chimique ; il est ainsi utilisé pour accroître la puissance explosive du nitrate d'ammonium.
Cuirs et peaux -- Propriétés physiques
Groupement carboxyle
Oxydation
Oxydes de chrome
Tanins végétaux
Tannage combinéLe tannage combiné se dit des tannages qui allient deux familles ou genre de tannage pour obtenir un résultat additionnant les qualités complémentaires des tannins mis en œuvre par exemple Chrome-Végétal ou Chrome-Synthétique
Température de retrait
Valonia et constituantsValonia est un genre d'algues vertes de la famille des Valoniaceae. La taille d'une seule cellule pluri-nucléée peut atteindre 2 cm chez certaines espèces. (Wikipedia)Index. décimale : 675.2 Préparation du cuir naturel. Tannage Résumé : Perval 20 and Perval 30 are oxidized degraded products of valonia extract prepared using 20 % and 30 % H2O2 (w/w). Single-bath combination tannages of Perval 20 with Cr(III) or Al(III) and tanning using Perval 30 Cr(III) complex were studied. The combination of 1.5-3.0 % Perval 20 and 1.0-1.5 % Cr2O3 produced leathers with shrinkage temperatures above 110 C, so did the Perval 30 — Cr(III) complex in similar offers. The combination tannage of 1.8% Perval 20 and 1.5 Al(III) in a single bath produced leather of Ts = 96°C, 26°C higher than aluminium tanning. The more remarkable synergistic effects of these two products with Cr(III) and Al(III) are due to their increasing carboxyl contents, as shown in the paper. It could be seen that the reduced chrome and chrome-free tannages established here would be more practical because of simplified processes alike to chrome tanning and elimination of the vegetable tanned character of leathers. Note de contenu : - 1) Determination of carboxyl in degraded products
- 2) single—bath combination tannages of Perval 20 and Cr(III)
- 3) Single—bath combination tannages of Perval 20 and Al(III)
- 4) Preparation and application of Perval 30 - Cr(III) complex tanning agent
- 5 ) Determinations of physical properties of leathers and Cr2O3 contents in spent tanning liquors
- Table 1 : Carboxyl content of valonia extract and its oxidized degradation products
- Table 2 : Features of the leather tanned by Perval 20 - Cr(Ill) single-bath combination tannage
- Table 3 : Comparison of Perval 20 and sodium phthalate in single-bath tanning
- Table 4 : Features of the leather tanned by Penal 20 - Al(llI) single-bath combination tannage
- Table 5 : Features of the leather tanned by Penal 30 - Cr(lll) complex
- Table 6 : Physical properties of leathers tanned by typical tannagesEn ligne : https://drive.google.com/file/d/1plJBdO9k9fnZGf7loRwTYCfo8NPimzfM/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=40232
in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC) > Vol. 85, N° 5 (09-10/2001) . - p. 171-174[article]Paints and coatings monitored by laser-induced breakdown spectroscopy / Taesam Kim in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 4, N° 3 (09/2007)
[article]
Titre : Paints and coatings monitored by laser-induced breakdown spectroscopy Type de document : texte imprimé Auteurs : Taesam Kim, Auteur ; Chhiu-Tsu Lin, Auteur ; Vari Minassian, Auteur ; Tinh Nguyen, Auteur Année de publication : 2007 Article en page(s) : p. 241-253 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Acier L'acier est un alliage métallique utilisé dans les domaines de la construction métallique et de la construction mécanique.
L'acier est constitué d'au moins deux éléments, le fer, très majoritaire, et le carbone, dans des proportions comprises entre 0,02 % et 2 % en masse1.
C'est essentiellement la teneur en carbone qui confère à l'alliage les propriétés du métal qu'on appelle "acier". Il existe d’autres métaux à base de fer qui ne sont pas des aciers comme les fontes et les ferronickels par exemple.
Algorithmes
Alliages
AluminiumL'aluminium est un élément chimique, de symbole Al et de numéro atomique 13. C’est un métal pauvre, malléable, de couleur argent, qui est remarquable pour sa résistance à l’oxydation13 et sa faible densité. C'est le métal le plus abondant de l'écorce terrestre et le troisième élément le plus abondant après l'oxygène et le silicium ; il représente en moyenne 8 % de la masse des matériaux de la surface solide de notre planète. L'aluminium est trop réactif pour exister à l'état natif dans le milieu naturel : on le trouve au contraire sous forme combinée dans plus de 270 minéraux différents, son minerai principal étant la bauxite, où il est présent sous forme d’oxyde hydraté dont on extrait l’alumine. Il peut aussi être extrait de la néphéline, de la leucite, de la sillimanite, de l'andalousite et de la muscovite.
L'aluminium métallique est très oxydable, mais est immédiatement passivé par une fine couche d'alumine Al2O3 imperméable de quelques micromètres d'épaisseur qui protège la masse métallique de la corrosion. On parle de protection cinétique, par opposition à une protection thermodynamique, car l’aluminium reste en tout état de cause très sensible à l'oxydation. Cette résistance à la corrosion et sa remarquable légèreté en ont fait un matériau très utilisé industriellement.
L'aluminium est un produit industriel important, sous forme pure ou alliée, notamment dans l'aéronautique, les transports et la construction. Sa nature réactive en fait également un catalyseur et un additif dans l'industrie chimique ; il est ainsi utilisé pour accroître la puissance explosive du nitrate d'ammonium.
Chromates
Galvanisation
Phosphates
Qualité -- Contrôle
Surfaces -- AnalyseIndex. décimale : 667.9 Revêtements et enduits Résumé : Two algorithms-peak picking and peaks correlation-have been compiled in a portable laser-induced breakdown spectroscopy (LIBS) system and used specifically for spectral fingerprinting of paints and coatings, which contain multiple ingredients and require several application steps. The LIBS technique starts with a laser shot on the specimen surface, detection of the emission of the elements present, and analysis of the sample compositions. The LIBS system has been successfully illustrated for the identification and analysis of coating substrates, surface pretreatments, and primer and topcoat paints obtained in the lab and at field sites. The results indicate that, despite the compositional complexity in organic metal finishing, the spectral fingerprint of paints and coatings can be effectively determined by the LIBS technique. The advantages of LIBS technique over other conventional methods, such as EDX, are that it is quasi-nondestructive (<100 µm of sample size), requires no sample preparation, is fast (within minutes), is user-friendly (for nontechnical personnel), and is capable of application both online and at the field sites. Note de contenu : EXPERIMENTAL PROCEDURE : Construction of a laser-induced materials analyzer - Materials of paints and coatings -
RESULTS AND DISCUSSION : LIBS : an in-situ and quasi-nondestructive analytical technique - LIBS characterization of substrates - LIBS characterization of surface pretreatment
layer on substrates - LIBS identification of paints and coating ingredients - Paint failure analysis for the on-site field samples : two casesDOI : 10.1007/s11998-007-9029-9 En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-007-9029-9.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=3639
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 4, N° 3 (09/2007) . - p. 241-253[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 008270 - Périodique Bibliothèque principale Documentaires Disponible Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1 : Coatings prepared from coating - Norme EN 12206-1 / Comité Européen de Normalisation / Bruxelles [Belgique] : CEN (2004)
Titre : Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1 : Coatings prepared from coating - Norme EN 12206-1 Type de document : texte imprimé Auteurs : Comité Européen de Normalisation, Auteur Editeur : Bruxelles [Belgique] : CEN Année de publication : 2004 Importance : 25 p. Présentation : ill. Format : 30 cm Note générale : Annexes - Bibliogr. Langues : Anglais (eng) Catégories : Aluminium L'aluminium est un élément chimique, de symbole Al et de numéro atomique 13. C’est un métal pauvre, malléable, de couleur argent, qui est remarquable pour sa résistance à l’oxydation13 et sa faible densité. C'est le métal le plus abondant de l'écorce terrestre et le troisième élément le plus abondant après l'oxygène et le silicium ; il représente en moyenne 8 % de la masse des matériaux de la surface solide de notre planète. L'aluminium est trop réactif pour exister à l'état natif dans le milieu naturel : on le trouve au contraire sous forme combinée dans plus de 270 minéraux différents, son minerai principal étant la bauxite, où il est présent sous forme d’oxyde hydraté dont on extrait l’alumine. Il peut aussi être extrait de la néphéline, de la leucite, de la sillimanite, de l'andalousite et de la muscovite.
L'aluminium métallique est très oxydable, mais est immédiatement passivé par une fine couche d'alumine Al2O3 imperméable de quelques micromètres d'épaisseur qui protège la masse métallique de la corrosion. On parle de protection cinétique, par opposition à une protection thermodynamique, car l’aluminium reste en tout état de cause très sensible à l'oxydation. Cette résistance à la corrosion et sa remarquable légèreté en ont fait un matériau très utilisé industriellement.
L'aluminium est un produit industriel important, sous forme pure ou alliée, notamment dans l'aéronautique, les transports et la construction. Sa nature réactive en fait également un catalyseur et un additif dans l'industrie chimique ; il est ainsi utilisé pour accroître la puissance explosive du nitrate d'ammonium.
Métaux -- Revêtements:Métaux -- Peinture
Revêtements -- Normes:Peinture -- Normes
Revêtements en bâtiment:Peinture en bâtimentIndex. décimale : 667.6 Peintures Résumé : This Part of EN 12206 specifies requirements and the corresponding methods of test relating to the organic coating of aluminium and aluminium alloy extrusions, sheet and preformed sections for architectural purposes, using coating powders. It also describes :
a) the pretreatment of the substrate prior to the coating process ;
b) the coating powder ;
c) the coating process ;
d) the final product.
Each item is dealt with separately in this Part of EN 12206 so that any interested party can ensure compliance appropriate to its area of responsibility.Classification ICS : 87.040 Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=32782 Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 20862 EN 12206-1 Norme Bibliothèque principale Documentaires Disponible Patinated surface effects / Nergis Savar in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 201, N° 4559 (04/2011)
PermalinkPCD vein technology facilitates composite machining / Mohamed Hamadi in JEC COMPOSITES MAGAZINE, N° 77 (12/2012)
PermalinkPeintures et vernis. Essais de corrosion par immersions-émersions alternées dans une solution tamponnée de chlorure de sodium - Norme ISO 15710 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (2002)
PermalinkPeintures et vernis. Panneaux normalisés pour essai - Norme NF EN ISO 1514 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2016)
PermalinkPerfect tightening control in INTERNATIONAL SURFACE TECHNOLOGY (IST), Vol. 7, N° 2 (2014)
PermalinkPerformance of steel, aluminium and thermoplastic composite beam structures / Michael Ruby in JEC COMPOSITES MAGAZINE, N° 82 (07/2013)
PermalinkPhysical properties of Al-doped ZnO films deposited on nonwoven substrates by radio frequence magnetron sputtering / Bingyao Deng in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 5, N° 3 (09/2008)
PermalinkPhysico-chemical study on micelle formation of chromium-aluminium synthetic tanning materials in various environments and at various temperatures and its application to leather / A. B. Mandal in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 67 (Année 1983)
PermalinkPhysico-chemical study on micelle formation of chromium-aluminium synthetic tanning materials in various environments and at various temperatures and its application to leather / A. B. Mandal in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 66 (Année 1982)
PermalinkPigments et matières de charges. Dioxyde de titane. Détermination de la teneur en éléments d'addition par spectrométrie d'absorption atomique / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1989)
PermalinkPlasma for aviation and aerospace industries / Wally Hansen in INTERNATIONAL SURFACE TECHNOLOGY (IST), Vol. 8, N° 1 (2015)
PermalinkPolyamide resin dispersion offers beneficial properties for coated roll stock uses / Palitha K. Abeywardena in ADHESIVES AGE, Vol. 40, N° 2 (02/1997)
PermalinkPOSS functionalized with mixed fluoroalkyl and methacryloxy substituents as modifiers for UV-curable coatings / Agnieszka Marcinkowska in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 16, N° 1 (01/2019)
PermalinkPowder coating enters a new dimension in INTERNATIONAL SURFACE TECHNOLOGY (IST), Vol. 5, N° 1 (2012)
PermalinkPreparation and characterization of hydrogen-containing silicone oil-modified polyurethane/Al composite coating with low-infrared emissivity / Weigang Zhang in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 19, N° 3 (05/2022)
PermalinkPreparation and tribological properties of MAO-PVA/PTFE self-lubricating composite coating on aluminum alloy surface in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 21, N° 1 (01/2024)
PermalinkPreparation of alkali-resistant aluminum pigment encapsulated with fluoropolymer by in situ polymerization / Pengchao Men in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 18, N° 5 (09/2021)
PermalinkPreparation of encapsulated aluminium pigments by emulsion polymerization and their characterization / Th. Batzilla in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 70, N° 881 (06/1998)
PermalinkPretreatment with condensate of glyoxal and n-thioureidopyromellitamic acid for a stable aluminium tannage / Hongru Wang in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 88, N° 4 (07-08/2004)
PermalinkProcess chain for the production of hybrid medical products / Moritz Mascher in KUNSTSTOFFE INTERNATIONAL, Vol. 112, N° 3 (2022)
PermalinkProtective behaviors of 2-mercaptobenzothiazole intercalated Zn–Al-layered double hydroxide coating / Yuhua Dong in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 11, N° 5 (09/2014)
PermalinkQuality boosting plasma / Ines A. Melamies in INTERNATIONAL SURFACE TECHNOLOGY (IST), Vol. 10, N° 3 (2017)
PermalinkQuelques exemples d'illustration de concepts de base de la chimie à l'aide de matériaux du quotidien / Jean-Louis Vignes in L'ACTUALITE CHIMIQUE, N° 374 (05/2013)
PermalinkRadar and lidar suitable car paints - From the view of a pigment manufacturer / Adalbert Huber in COATINGS TECH, Vol. 20, N° 5 (09-10/2023)
PermalinkReaction of gelatin with Cr(III) Al(III) and Fe(III) : Investigation by spectrofluorometry / Chen Jiping in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 92, N° 6 (11-12/2008)
PermalinkReduced angle sensitivity of structural coloration on an industrial aluminium platform / Rachel Odessey in COLORATION TECHNOLOGY, Vol. 136, N° 3 (06/2020)
PermalinkReducing a company's ecological footprint with powder coating in INTERNATIONAL SURFACE TECHNOLOGY (IST), Vol. 9, N° 2 (2016)
PermalinkReflections on a sparkling trade / Peter Wissling in EUROPEAN COATINGS JOURNAL (ECJ), N° 1/2011 (01/2011)
PermalinkPermalinkReliable adhesion on snow / Claude Hosotte in ADHESION - ADHESIVES + SEALANTS, Vol. 19, N° 4/2022 (2022)
PermalinkRising to the challenge of a chrome-free world / Harish Mistry in SURFACE COATINGS INTERNATIONAL, Vol. 106.2 (03-04/2023)
PermalinkRobust superamphiphobic aluminum surfaces : fabrication and investigation / Z. E. Zhao in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 16, N° 6 (11/2019)
PermalinkA safe and sustainable shift to metal cans / Robyn McMillan in COATINGS TECH, Vol. 19, N° 5 (05-06/2022)
PermalinkSeeking soft leathers with a tight grain / David Rabinovich in WORLD LEATHER, Vol. 14, N° 5 (08-09/2001)
PermalinkSeparation and analysis of Zr-Al-Ti complex tanning agent components / Wang Kangjian in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 97, N° 2 (03-04/2013)
PermalinkShining under the spotlight / Oliver Kipfmüller in EUROPEAN COATINGS JOURNAL (ECJ), N° 3 (03/2013)
PermalinkSimple determination of fast curing parameters for bonded structures / Jan Ditter in ADHESION - ADHESIVES + SEALANTS, Vol. 17, N° 1/2020 (2020)
PermalinkSimple matting for indoor and outdoor use / Thomas Czeczatka in EUROPEAN COATINGS JOURNAL (ECJ), N° 12 (12/2022)
PermalinkSimply stir in : scatter-free red / Javier Morcillo Ruiz in EUROPEAN COATINGS JOURNAL (ECJ), N° 3 (03/2019)
PermalinkPermalinkA smart anticorrosion coating based on hollow silica nanocapsules with inorganic salt in shells / Dong Zhao in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 14, N° 1 (01/2017)
PermalinkSolid state NMR analysis for hide powder tanned by aluminum, silicon and phosphorus tanning agents before and after hydrothermal denaturation / Jun Liu in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CXVI, N° 10 (10/2021)
PermalinkPermalinkStabilising pearlescent pigments / Ulrich Schmidt in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 197, N° 4519 (12/2007)
PermalinkStabilization of aluminium pigments in aqueous alkaline media by styrene copolymers / Bodo Müller in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 67, N° 846 (07/1995)
Permalink