Accueil
PAINTINDIA . Vol. LVII, N° 4Mention de date : 04/2007Paru le : 15/04/2007 |
Dépouillements
Ajouter le résultat dans votre panierSelf healing coatings / Deeplaxmi L. Chawan in PAINTINDIA, Vol. LVII, N° 4 (04/2007)
[article]
Titre : Self healing coatings Type de document : texte imprimé Auteurs : Deeplaxmi L. Chawan, Auteur Année de publication : 2007 Article en page(s) : p. 71-82 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Anticorrosifs
Colloides
Elastomères
Matériaux hybrides
Métathèse (chimie)
Microcapsules
PolydiméthylsiloxaneLe polydiméthylsiloxane —[O-Si(CH3)2]n—, ou poly(diméthylsiloxane) selon la nomenclature systématique, communément appelé PDMS ou diméthicone, est un polymère organominéral de la famille des siloxanes souvent présent dans les shampoings. On l'y ajoute pour augmenter le volume des cheveux mais il peut également aller boucher les pores du cuir chevelu et rendre les cheveux gras. C'est une des raisons pour lesquelles se laver les cheveux tous les jours est très déconseillé avec un shampooing contenant des silicones.
Il existe également de l'amodiméthicone, qui est un dérivé du diméthicone.
Le polydiméthylsiloxane est un additif alimentaire (E900), utilisé comme antimoussant dans les boissons (Coca-Cola BlāK).
La chaîne de poly(diméthylsiloxane) forme également la structure de base des huiles et des caoutchoucs silicones.
Polymères autoréparants
Revêtement autoréparant:Peinture autoréparante
SiliceLa silice est la forme naturelle du dioxyde de silicium (SiO2) qui entre dans la composition de nombreux minéraux.
La silice existe à l'état libre sous différentes formes cristallines ou amorphes et à l'état combiné dans les silicates, les groupes SiO2 étant alors liés à d'autres atomes (Al : Aluminium, Fe : Fer, Mg : Magnésium, Ca : Calcium, Na : Sodium, K : Potassium...).
Les silicates sont les constituants principaux du manteau et de l'écorce terrestre. La silice libre est également très abondante dans la nature, sous forme de quartz, de calcédoine et de terre de diatomée. La silice représente 60,6 % de la masse de la croûte terrestre continentale.Index. décimale : 667.9 Revêtements et enduits Résumé : The new generation of coatings are developed called self-healing coatings which are made by incorporating microcapsules (60-150 microns in diameter) that contains film formers and corrosion inhibitors. Different methods of self-healing are discussed in the paper. These coatings help greatly to improve products safety and reliability. With help of nanotechnology also several researches are done in these coatings. These coatings are having applications in automotive topcoats, clearcoats, in marine coatings in defense and coatings for glass. Several advances are made in microencapsulated based material systems, which include the development of faster healing kinetics, the ability to heal dynamic crack growth, the development of self-healing elastomeric material systems, and the extension of self-healing to smaller size scales. Note de contenu : - Self healing concept
- Different methods of self-healing : Ring opening metathesis polymerization - Polydimethylsiloxane-based self-healing - By incorporation of Al2O3 Nb - Using colloidal silica
- Incorporation of microcapsule in the coatings
- Smart self healing nanotechnology coatings
- New approach towards developments in self-healing coatings : Self-healing elastomer nanocomposites - Research line
- Benefits of self-healing coatings
- Applications of self-healing coatings : Automotive coatings - Marine Coatings - Coatings or defence - Coatings for glassPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=11472
in PAINTINDIA > Vol. LVII, N° 4 (04/2007) . - p. 71-82[article]Réservation
Réserver ce documentProcess improvement with 'right First time' (RFT) approach / Jaydeb Gayen in PAINTINDIA, Vol. LVII, N° 4 (04/2007)
[article]
Titre : Process improvement with 'right First time' (RFT) approach Type de document : texte imprimé Auteurs : Jaydeb Gayen, Auteur Année de publication : 2007 Article en page(s) : p. 83-89 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Bon du premier coup (Méthode)
Production -- Gestion
Technique de la productionIndex. décimale : 667.9 Revêtements et enduits Résumé : With tighter competition in every industry, delivering just "good" or "defect free" products and service won't guarantee success unless backed by consistency and on-line-delivery. By focusing the process design and value-adding activities, cost cutting can be achieved and the change can contribute to major improvement in on-time delivery. Although improvement to the internal processes is of no interest to the customer, however, enhancing manufacturing capability through the specialized process is the real key to competitiveness. Many manufacturing processes have already been through intense quality scrutiny as routine method is proved to yield nothing and hence it will be looked at some compelling reasons in this article why manufacturing operations can benefit from RFT discipline and how to adopt the approach to meet unique challenge not only to improve the performance but to improve the improvement. Right First Time is defined as the process wherein the batch is released in one go i.e. without any tints or adjustments. Like many systems it may seem impracticable, however, can deliver immensely if implemented meticulously in the plant and has been the cynosure of all eyes along with 'six sigma' and 55' in some of the multinational companies where its benefits are being exploited. The approach is very simple and talks about strict control right from raw materials to process controls and is discussed in detail in this article. Note de contenu : - Definig key objective and requirements
- Identifying core Process
- Measure current performance
- Analyze and implement improvements
- SustenancePermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=11473
in PAINTINDIA > Vol. LVII, N° 4 (04/2007) . - p. 83-89[article]Réservation
Réserver ce documentAnti-graffiti coatings / Harish Chandack in PAINTINDIA, Vol. LVII, N° 4 (04/2007)
[article]
Titre : Anti-graffiti coatings Type de document : texte imprimé Auteurs : Harish Chandack, Auteur Année de publication : 2007 Article en page(s) : p. 91-104 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Revêtements anti-graffitis Index. décimale : 667.9 Revêtements et enduits Résumé : Graffiti especially on buildings, public transport vehicles or public utilities is a great nuisance. The cost of graffiti removal has been estimated as exceeding £500 million per year with the European countries. It appears impossible to reduce the amount of graffiti being applied and thereby putting forward a great challenge to the coating industry to develop the coatings with an tigraffiti properties. The goal is, removal of graffiti using simple cleaning methods, if possible only with water. For a long time the coating industry has thought of different possibilities of a simple method of graffiti removal.
This paper reviews the several possibilities to make coatings graffiti resistant including the use of sacrificial coatings, modification of the coating with antigraffiti resins and graffiti cleaning methods.Note de contenu : - What is Graffiti?
- Anti-graffiti treatments
- Anti Graffiti Coatings
- Properties desired in anti graffiti coatings
- Types of anti graffiti coatings
A) Permanent antigraffiti coatings
B) Sacrificial antigraffiti coatings
- Coatings modified with anti-graffiti resins : Fluorinated resins
- Polyurethane coatings
- Water-borne crosslinkable fluorochemical coatings
- Anti graffiti powder coatings
- Formulations
- ASTM D6578-00, "Standard Practice for Determination of Graffiti Resistance" of coatings
- Removal graffiti : Mechanical process - Chemical process
- Solvents used for graffiti cleaningPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=11474
in PAINTINDIA > Vol. LVII, N° 4 (04/2007) . - p. 91-104[article]Réservation
Réserver ce documentPolyurethane dispersions provide sustainable technology for combining performance with the ease of application / Robert C. Jansson in PAINTINDIA, Vol. LVII, N° 4 (04/2007)
[article]
Titre : Polyurethane dispersions provide sustainable technology for combining performance with the ease of application Type de document : texte imprimé Auteurs : Robert C. Jansson, Auteur Année de publication : 2007 Article en page(s) : p. 105-116 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Formulation (Génie chimique)
Polymères en émulsion
Polyuréthanes
Revêtements organiquesIndex. décimale : 667.9 Revêtements et enduits Note de contenu : - Fundamentals of polyurethane dispersions
- Preparation
- Ionic moiety for anionic dispersions
- An example on PUD formulation
- Procedure for PUD preparation (prepolymere mixing process, Table 2) : Preparation of the prepolymer - Neutralisation of the prepolymer - Dispersion and chain extension
- Safety issues
- Applications of polyurethane dispersions
- Structure property relationship
- Tailoring the soft segment
- Effect of neutralisation degree
- Incorporation of ingredients for special featuresPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=11475
in PAINTINDIA > Vol. LVII, N° 4 (04/2007) . - p. 105-116[article]Réservation
Réserver ce documentNew wet milling technologies for a cleaner and greener world / S. Srirangarajan in PAINTINDIA, Vol. LVII, N° 4 (04/2007)
[article]
Titre : New wet milling technologies for a cleaner and greener world Type de document : texte imprimé Auteurs : S. Srirangarajan, Auteur Année de publication : 2007 Article en page(s) : p. 117-124 Langues : Anglais (eng) Catégories : Décapants
FragmentationIndex. décimale : 667.9 Revêtements et enduits Note de contenu : - VIVA Technology for crownless rolls
- Re-circulation millsPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=11476
in PAINTINDIA > Vol. LVII, N° 4 (04/2007) . - p. 117-124[article]Réservation
Réserver ce documentOvercoming substrate wetting problems / Gururaj Moharir in PAINTINDIA, Vol. LVII, N° 4 (04/2007)
[article]
Titre : Overcoming substrate wetting problems Type de document : texte imprimé Auteurs : Gururaj Moharir, Auteur Année de publication : 2007 Article en page(s) : p. 127-129 Langues : Anglais (eng) Catégories : Mouillage (chimie des surfaces)
Revêtements -- AdditifsIndex. décimale : 667.9 Revêtements et enduits Note de contenu : - How is substrate wetting defined?
- Improved Wetting
- Composition of substrate-wetting additives
- Comparison of different substrate - wetting additives
- Criteria for the selection of substrate-wetting additives
- Selecting the correct substrate-wetting additivePermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=11477
in PAINTINDIA > Vol. LVII, N° 4 (04/2007) . - p. 127-129[article]Réservation
Réserver ce document