Accueil
KUNSTSTOFFE PLAST EUROPE . Vol. 95, N° 11/2005PUR-CSM : System variant of polyurethane spray technology / Tooling : High-tech production facility for infusion solutions / Special kunststoffe automotiveMention de date : 11/2005 Paru le : 01/11/2005 |
Dépouillements
Ajouter le résultat dans votre panierSuccess factor business process management / Peter Felber in KUNSTSTOFFE PLAST EUROPE, Vol. 95, N° 11/2005 (11/2005)
[article]
Titre : Success factor business process management Type de document : texte imprimé Auteurs : Peter Felber, Auteur Année de publication : 2005 Article en page(s) : p. 28-32 Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Enterprise transparency - In recent years it has turned out that controlling business processes is probably the most important factor for entrepreneurial success both in the manufacturing industry and in service industries. The following report describes how a medium-size enterprise organises, structures and supervises its processes. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=7324
in KUNSTSTOFFE PLAST EUROPE > Vol. 95, N° 11/2005 (11/2005) . - p. 28-32[article]Réservation
Réserver ce documentUse of PVD coatings in plasticising units / Christian Gornik in KUNSTSTOFFE PLAST EUROPE, Vol. 95, N° 11/2005 (11/2005)
[article]
Titre : Use of PVD coatings in plasticising units Type de document : texte imprimé Auteurs : Christian Gornik, Auteur Année de publication : 2005 Article en page(s) : p. 44-49 Note générale : Bibliogr. Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Wear protection - PVD coatings are already used to a large extent in mouldmaking. Depending on the type of coating, they can provide improved protection against wear, better part release characteristics or lower friction in ejector guide bushings. In a new systematic approach, PVD coatings have been investigated with regard to their suitability for use in plasticising units. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=7325
in KUNSTSTOFFE PLAST EUROPE > Vol. 95, N° 11/2005 (11/2005) . - p. 44-49[article]Réservation
Réserver ce documentHot-runner solution for a four-gang switch plate / Dirk Paulmann in KUNSTSTOFFE PLAST EUROPE, Vol. 95, N° 11/2005 (11/2005)
[article]
Titre : Hot-runner solution for a four-gang switch plate Type de document : texte imprimé Auteurs : Dirk Paulmann, Auteur Année de publication : 2005 Article en page(s) : p. 58-61 Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Case study (5) - In the production of a four-gang wall plate for a high-quality programme of switches and plug sockets, the main requirements on the mould and hot runner were frequent colour changes from charcoal to white, complete absence of weld lines, and adequate plane parallelism. Other difficulties were the long flow-path/wall-thickness ratios and high injection pressures. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=7326
in KUNSTSTOFFE PLAST EUROPE > Vol. 95, N° 11/2005 (11/2005) . - p. 58-61[article]Réservation
Réserver ce documentHigh cavitation in minimal space / Thomas Adolph in KUNSTSTOFFE PLAST EUROPE, Vol. 95, N° 11/2005 (11/2005)
[article]
Titre : High cavitation in minimal space Type de document : texte imprimé Auteurs : Thomas Adolph, Auteur Année de publication : 2005 Article en page(s) : p. 62-63 Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Nozzles for tightly spaced cavities - Nozzles are one of the most technically challenging components of a hot-runner system. They are responsible to a large degree for reliable operation, moulded part quality and the economics of the injection moulding process. Development of a new needle shutoff nozzle (valve gate) with a nominal diameter of 8 mm sets a new standard for applications with tightly spaced cavities or minimal space for installation. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=7327
in KUNSTSTOFFE PLAST EUROPE > Vol. 95, N° 11/2005 (11/2005) . - p. 62-63[article]Réservation
Réserver ce documentHigh-tech manufacture for infusion solutions / Jörg Essinger in KUNSTSTOFFE PLAST EUROPE, Vol. 95, N° 11/2005 (11/2005)
[article]
Titre : High-tech manufacture for infusion solutions Type de document : texte imprimé Auteurs : Jörg Essinger, Auteur Année de publication : 2005 Article en page(s) : p. 66-68 Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Hot-runner technology - B. Braun Melsungen AG, one of the Europe’s largest manufacturers, has brought a new high-tech production facility for infusion solutions on stream. Needle valve technology played an important role in the implementation of the project. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=7328
in KUNSTSTOFFE PLAST EUROPE > Vol. 95, N° 11/2005 (11/2005) . - p. 66-68[article]Réservation
Réserver ce documentComplete freedom of design / Christof M. Stotko in KUNSTSTOFFE PLAST EUROPE, Vol. 95, N° 11/2005 (11/2005)
[article]
Titre : Complete freedom of design Type de document : texte imprimé Auteurs : Christof M. Stotko, Auteur Année de publication : 2005 Article en page(s) : p. 71-74 Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Laser sintering - The characteristic of laser sintering is to build up a part layer by layer directly from CAD data without needing the tooling and moulds. In view of this aspect, which is particularly useful for small series and prototypes, an even bigger advantage is often overlooked, namely the tremendous freedom of design. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=7329
in KUNSTSTOFFE PLAST EUROPE > Vol. 95, N° 11/2005 (11/2005) . - p. 71-74[article]Réservation
Réserver ce documentFibre-reinforced sandwich and profile structures in one step / Stefan Giehl in KUNSTSTOFFE PLAST EUROPE, Vol. 95, N° 11/2005 (11/2005)
[article]
Titre : Fibre-reinforced sandwich and profile structures in one step Type de document : texte imprimé Auteurs : Stefan Giehl, Auteur ; Peter Mitschang, Auteur Année de publication : 2005 Article en page(s) : p. 76-78 Note générale : Bibliogr. Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Process integration - An interval hot pressing process has been developed for in-situ production of fibre-reinforced sandwich and profile structures in one step. With this process, it is possible to produce sandwich structures of any length. In addition, production of the cover layer as a separate manufacturing step is eliminated. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=7330
in KUNSTSTOFFE PLAST EUROPE > Vol. 95, N° 11/2005 (11/2005) . - p. 76-78[article]Réservation
Réserver ce documentInnovative filter for problem-free cooling / Suzanne Lemken in KUNSTSTOFFE PLAST EUROPE, Vol. 95, N° 11/2005 (11/2005)
[article]
Titre : Innovative filter for problem-free cooling Type de document : texte imprimé Auteurs : Suzanne Lemken, Auteur Année de publication : 2005 Article en page(s) : p. 79-80 Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Reliable production - Cold plays a central role in plastics processing, and the quality of the cooling water also plays a role in ensuring the reliable operation of the cooling unit. Solids accumulate in unfiltered water, thereby impairing production. The use of filters is thus indispensable but is frequently associated with problems. Cooling unit producers, Reisner, are now offering a maintenance-free alternative that can be adapted to any type of system. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=7331
in KUNSTSTOFFE PLAST EUROPE > Vol. 95, N° 11/2005 (11/2005) . - p. 79-80[article]Réservation
Réserver ce documentIn-line plasma processes / Christian Buske in KUNSTSTOFFE PLAST EUROPE, Vol. 95, N° 11/2005 (11/2005)
[article]
Titre : In-line plasma processes Type de document : texte imprimé Auteurs : Christian Buske, Auteur ; Alexander Knospe, Auteur Année de publication : 2005 Article en page(s) : p. 82-86 Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Surface technology - The Openair plasma process has, for some years now, been creating a variety of new applications, especially for the cleaning, activation and coating of moulded parts and film. Now, a modular system has been developed for the in-line pretreatment of PP film that works with flexible widths and allows a high level of activation. En ligne : https://www.kunststoffe.de/en/journal/archive/article/surface-technology-in-line [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=7332
in KUNSTSTOFFE PLAST EUROPE > Vol. 95, N° 11/2005 (11/2005) . - p. 82-86[article]Réservation
Réserver ce documentOutside and under the bonnet / Wolfgang Kircher in KUNSTSTOFFE PLAST EUROPE, Vol. 95, N° 11/2005 (11/2005)
[article]
Titre : Outside and under the bonnet Type de document : texte imprimé Auteurs : Wolfgang Kircher (1948), Auteur Année de publication : 2005 Article en page(s) : p. 92-95 Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Innovative solutions from VDI-K - The VDI-K “Plastics in Automotive Construction” congress held in Mannheim/Germany is the forum for automotive engineers seeking to learn more about plastics innovations that have proved themselves in initial series applications. The following report from this year's congress deals with applications in bodywork and the engine compartment. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=7333
in KUNSTSTOFFE PLAST EUROPE > Vol. 95, N° 11/2005 (11/2005) . - p. 92-95[article]Réservation
Réserver ce documentShop window for innovations in the motor industry / Stefan Schlott in KUNSTSTOFFE PLAST EUROPE, Vol. 95, N° 11/2005 (11/2005)
[article]
Titre : Shop window for innovations in the motor industry Type de document : texte imprimé Auteurs : Stefan Schlott, Auteur Année de publication : 2005 Article en page(s) : p. 96-101 Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Trends at the IAA - The mood of the exhibitors at this year's Frankfurt International Motor Show lay somewhere between hope and fear. The hope was that the many innovations can provide the necessary spark for the industry's spluttering engine. The exhibition also featured plenty of new developments on the materials side. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=7334
in KUNSTSTOFFE PLAST EUROPE > Vol. 95, N° 11/2005 (11/2005) . - p. 96-101[article]Réservation
Réserver ce documentLaser welding in computer simulation / Sam D. Rostami in KUNSTSTOFFE PLAST EUROPE, Vol. 95, N° 11/2005 (11/2005)
[article]
Titre : Laser welding in computer simulation Type de document : texte imprimé Auteurs : Sam D. Rostami, Auteur ; Ian A. Jones, Auteur ; Craig Norrey, Auteur Année de publication : 2005 Article en page(s) : p. 104-108 Note générale : Bibliogr. Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Optimised process control - A computer model for calculating the weld temperature, temperature profile and melt depth in the laser welding of thermoplastics was developed and subsequently checked by experiment. It is shown that the software can help to optimise the process parameters if data is available on the material, weld dimensions and welding speed. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=7335
in KUNSTSTOFFE PLAST EUROPE > Vol. 95, N° 11/2005 (11/2005) . - p. 104-108[article]Réservation
Réserver ce documentPromising technology / Detlev Mies in KUNSTSTOFFE PLAST EUROPE, Vol. 95, N° 11/2005 (11/2005)
[article]
Titre : Promising technology Type de document : texte imprimé Auteurs : Detlev Mies, Auteur ; Reiner Paul, Auteur ; Dirk Wegener, Auteur Année de publication : 2005 Article en page(s) : p. 110-112 Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Panorama roof for the opel zafira - Panorama Roof for the Opel Zafira. Complex roof modules can be produced with a Class A surface via in-mould lamination (backmoulding) with polyurethane foam. These satisfy new and increasingly diverse customer requirements. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=7336
in KUNSTSTOFFE PLAST EUROPE > Vol. 95, N° 11/2005 (11/2005) . - p. 110-112[article]Réservation
Réserver ce documentCentralised painting of plastic parts / Tobias Rinza in KUNSTSTOFFE PLAST EUROPE, Vol. 95, N° 11/2005 (11/2005)
[article]
Titre : Centralised painting of plastic parts Type de document : texte imprimé Auteurs : Tobias Rinza, Auteur Année de publication : 2005 Article en page(s) : p. 116-119 Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Logistics - Centralised painting of plastic parts for the automotive sector can reduce colour mismatches and simplify logistics. This concept also offers plastics processors an interesting opportunity to gain a competitive edge. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=7337
in KUNSTSTOFFE PLAST EUROPE > Vol. 95, N° 11/2005 (11/2005) . - p. 116-119[article]Réservation
Réserver ce documentOpen to many different applications / Ingo Kleba in KUNSTSTOFFE PLAST EUROPE, Vol. 95, N° 11/2005 (11/2005)
[article]
Titre : Open to many different applications Type de document : texte imprimé Auteurs : Ingo Kleba, Auteur ; Thomas Kirsten, Auteur Année de publication : 2005 Article en page(s) : p. 127-129 Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : PUR composite spray moulding (PUR-CSM) - A new system variant of polyurethane spray technology involves the use of an isocyanate plus a fast- and a slow-reacting polyol. Depending on requirements, various additives, such as colour components, blowing agents or chopped reinforcing fibres, can be incorporated. For the production of moulded parts, only one mould half is required and no mould carrier. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=7338
in KUNSTSTOFFE PLAST EUROPE > Vol. 95, N° 11/2005 (11/2005) . - p. 127-129[article]Réservation
Réserver ce documentThe route to a working prototype / Tom Mueller in KUNSTSTOFFE PLAST EUROPE, Vol. 95, N° 11/2005 (11/2005)
[article]
Titre : The route to a working prototype Type de document : texte imprimé Auteurs : Tom Mueller, Auteur Année de publication : 2005 Article en page(s) : p. 130-131 Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Estimating the material properties - Developing an intake manifold for a V6 engine required a range of functional tests. A number of prototypes had already failed due to a lack of stability, and the alternative of producing the required parts from series material, was impossible on cost grounds. A methodological approach to the material selection for prototype construction was seen to open up the way to a solution. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=7339
in KUNSTSTOFFE PLAST EUROPE > Vol. 95, N° 11/2005 (11/2005) . - p. 130-131[article]Réservation
Réserver ce documentOn the road to the composite car body in KUNSTSTOFFE PLAST EUROPE, Vol. 95, N° 11/2005 (11/2005)
[article]
Titre : On the road to the composite car body Type de document : texte imprimé Année de publication : 2005 Article en page(s) : p. 132-134 Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Glass fibre reinforced components - The British engineering firm Lotus Engineering and the German supplier Jacob Composite GmbH present "Ecolite" – a joint research project on fibre-reinforced composite materials that are also suitable from an economic point of view for use in medium series in the automotive industry. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=7340
in KUNSTSTOFFE PLAST EUROPE > Vol. 95, N° 11/2005 (11/2005) . - p. 132-134[article]Réservation
Réserver ce documentDrying with infrared radiation in KUNSTSTOFFE PLAST EUROPE, Vol. 95, N° 11/2005 (11/2005)
[article]
Titre : Drying with infrared radiation Type de document : texte imprimé Année de publication : 2005 Article en page(s) : p. 134 Langues : Anglais (eng) Index. décimale : 668.4 Plastiques, vinyles Résumé : Heat treatment - Coated safety materials, such as those used e.g. in airbags, have to meet high quality standards. When infrared radiators are used for drying and preheating, the process can be controlled individually and the scrap rate diminished significantly. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=7341
in KUNSTSTOFFE PLAST EUROPE > Vol. 95, N° 11/2005 (11/2005) . - p. 134[article]Réservation
Réserver ce document