Accueil
Résultat de la recherche
14 résultat(s) recherche sur le tag 'Styrène'
Ajouter le résultat dans votre panier Affiner la recherche Générer le flux rss de la recherche
Partager le résultat de cette recherche
Styrene copolymers (ABS, ASA, SAN, MABS) / Wolfgang Glenz in KUNSTSTOFFE INTERNATIONAL, Vol. 98, N° 10/2008 (10/2008)
[article]
Titre : Styrene copolymers (ABS, ASA, SAN, MABS) Type de document : texte imprimé Auteurs : Wolfgang Glenz, Auteur Année de publication : 2008 Article en page(s) : p. 77-80 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Copolymères
Matières plastiques -- Industrie et commerce
StyrèneTags : Styrene acrylonitrile copolymer Acrylate styrene Methyl methacrylathe butadiene copolymers Index. décimale : 668.4 Plastiques, vinyles Résumé : Versatile profile and applications - Styrene copolymers cover a wide product range, from standard ABS to specialties such as MABS. With its balanced profile of properties and an advantageous cost-benefit ratio, standard ABS has profited from strong demand in recent years. Styrene copolymer specialties also show high growth rates, though starting from a lower base. While standard ABS is now characterized by its versatility, new product developments are increasingly concentrating on styrene copolymer specialties and their application fields. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=3561
in KUNSTSTOFFE INTERNATIONAL > Vol. 98, N° 10/2008 (10/2008) . - p. 77-80[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 010798 - Périodique Bibliothèque principale Documentaires Disponible Plastiques. Styrène/acrylonitrile (SAN) pour moulage et extrusion. Partie 1 : Système de désignation et base de spécification - Norme NF EN ISO 4894-1 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1999)
Titre de série : Plastiques Titre : Styrène/acrylonitrile (SAN) pour moulage et extrusion. Partie 1 : Système de désignation et base de spécification - Norme NF EN ISO 4894-1 Type de document : texte imprimé Auteurs : Association Française de Normalisation (Paris) , Auteur Editeur : Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) Année de publication : 1999 Importance : Pagination multiple Présentation : ill. Format : 30 cm Note générale : Annexe - Bibliogr. Catégories : Copolymère styrène-acrylonitrile
Matières plastiques -- Extrusion
Matières plastiques -- Moulage par injection
Matières plastiques -- NormesTags : Plastique 'Moulage plastiques' Extrusion 'Matière mouler' extruder' Copolymère Styrène Acrylonitrile Désignation 'Bloc données' 'Code Index. décimale : 668.4 Plastiques, vinyles Résumé : Le présent document établit un système de désignation des matériaux thermoplastiques styrène/acrylonitrile, qui peut être utilisé comme base pour les spécifications. Indice de classement : T 53-036-1 Classification ICS : 83.080.20 Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=19058 Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 15359 T 53-036-1 Norme Bibliothèque principale Documentaires Disponible Plastiques. Styrène/acrylonitrile (SAN) pour moulage et extrusion. Partie 2 : Préparation des éprouvettes et détermination des propriétés - Norme NF EN ISO 4894-2 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1999)
Titre de série : Plastiques Titre : Styrène/acrylonitrile (SAN) pour moulage et extrusion. Partie 2 : Préparation des éprouvettes et détermination des propriétés - Norme NF EN ISO 4894-2 Type de document : texte imprimé Auteurs : Association Française de Normalisation (Paris) , Auteur Editeur : Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) Année de publication : 1999 Importance : Pagination multiple Présentation : ill. Format : 30 cm Note générale : Annexes - Bibliogr. Catégories : Copolymère styrène-acrylonitrile
Matières plastiques -- Extrusion
Matières plastiques -- Moulage par injection
Matières plastiques -- NormesTags : Plastique Thermoplastique Styrène Acrylonitrile 'Moulage plastiques' Extrusion 'Matière mouler' extruder' 'Préparation spécimen essai' Détermination Propriété 'Conditions Index. décimale : 668.4 Plastiques, vinyles Résumé : Le présent document prescrit les méthodes de préparation des éprouvettes et les méthodes d'essai à appliquer pour déterminer les propriétés des SAN pour moulage et extrusion. Indice de classement : T 53-036-2 Classification ICS : 83.080.20 Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=19059 Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 15424 T 53-036-3 Norme Bibliothèque principale Documentaires Disponible Copolymers of styrene and maleic anhydride : reactivity ratio, physical behavior and spectral properties / Suman Kumari in PAINTINDIA, Vol. LVIII, N° 11 (11/2008)
[article]
Titre : Copolymers of styrene and maleic anhydride : reactivity ratio, physical behavior and spectral properties Type de document : texte imprimé Auteurs : Suman Kumari, Auteur ; Dhirendra Nigam, Auteur ; Devendra Agarwal, Auteur ; Indira Nigam, Auteur Année de publication : 2008 Note générale : Bibliogr. Langues : Anglais (eng) Tags : Styrene maleic anhydride (SMA) copolymer Reactivity ratio Index. décimale : 667.9 Revêtements et enduits Résumé : Radical polymerization of styrene and maleic anhydride was carried out in N,N-dimethylformamide (DMF) as a solvent at the temperature of 80°C using benzoylperoxide as initiator. The monomer ratio was varied in the range of 0.5:1 to 4:1. The copolymer compositions were determined by CHN-elemental analysis. The copolymers were characterized by CNMR spectroscopy and was used to determine the copolymer composition. These values are comparable to those obtained from CHN-analysis although the mole fractions of styrene as observed by elemental analysis in the copolymers is slightly higher than the corresponding values observed by CNMR spectra. The ratio of styrene and maleic anhydride in the copolymer was in the range of 1.02 - 1.17 up to the monomer feed ration 2:1 and increased to about 1.53 for feed ratio of 4:1. This shows styrene and maleic anhydride have a strong tendency to form an alternating copolymer which deviates slightly when higher concentration of styrene is taken in the feed. This tendency can be explained on the basis of either of two mechanisms viz. chain transfer complex formation as well as penultimate effect due to presence of a polar solvent. The reactivity ration were determined by various methods viz Myao Lewis, Fineman Ross method, Kelen Tudos methods. The more precise value of reactivity ratio could be determined by Kelen Tudos as compared to other methods. The reactivity ratios determined by these methods shows that r1r2 <<1 which further indicated that on copolymerization of styrene and maleic anhydride, an alternating copolymer was formed. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=6961
in PAINTINDIA > Vol. LVIII, N° 11 (11/2008)[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 011351 - Périodique Bibliothèque principale Documentaires Disponible
[article]
Titre : New styrene-free resin : better for Catamaran Cruisers and the environment Type de document : texte imprimé Auteurs : Steve Martin, Auteur Année de publication : 2010 Article en page(s) : p. 38-39 Langues : Anglais (eng) Tags : 'Construction bâteaux' 'Résines thermodurcissable' Pulvérisation Styrène 'Matériaux composite' Polymères Index. décimale : 668.4 Plastiques, vinyles Résumé : For more than 30 years, Catamaran Cruisers has been making houseboats that are highly affordable, durable, stable, manoeuvrable and fuel efficient. Now, Catamaran Cruisers is the first company in the marine sector to adopt AOC’s new styrene-free technology that is better for the environment and the workplace. Note de contenu : - HAP-free technology En ligne : http://www.jeccomposites.com/news/composites-news/new-styrene-free-resin-better- [...] Format de la ressource électronique : Web Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=13787
in JEC COMPOSITES MAGAZINE > N° 59 (08-09/2010) . - p. 38-39[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 012405 - Périodique Bibliothèque principale Documentaires Disponible Effect of crosslinker reaction rate on film properties for thermoset coatings / Ward T. Brown in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 904 (05/2000)
PermalinkLatex produced with carboxylic acid comonomer for waterborne coatings : Particle morphology variations with changing pH / Daisuke Fukuhara in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 7 (07/2005)
PermalinkNew fast drying styrenated alkyds / P. D. Sathe in PAINTINDIA, Vol. XLIX, N° 5 (05/1999)
PermalinkThickener addition and the morphology of UPE/PVAc blends / M. Montagne in JEC COMPOSITES MAGAZINE, N° 34 (07-08/2007)
PermalinkWaterborne polymers for use in thermoset coatings / J. E. Blasko in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 925 (02/2002)
PermalinkAdvances in emulsion polymerization for coatings applications / Mohamed S. El-Aasser in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 920 (09/2001)
PermalinkGreen minerals solution / Simon Bussell in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 199, N° 4543 (12/2009)
PermalinkNovel inks from styrenated alkyld resins / P. D. Sathe in PAINTINDIA, Vol. XLIX, N° 7 (07/1999)
PermalinkStyrenation of triglyceride oils by macronomer technique / F. Seniha Güner in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 907 (08/2000)
Permalink