Accueil
Détail de l'indexation
668.3 : Adhésifs et produits semblables 668 Technologie des autres produits organiques
668.1 Agents tensioactifs : savons, détergents 668.4 Plastiques, vinyles 668.5 Parfums et cosmétiques 668.65 Pesticides 668.9 Polymères |
Ouvrages de la bibliothèque en indexation 668.3
Ajouter le résultat dans votre panier Affiner la recherche
[article]
Titre : Hotter performance : Tertiary isocyanate monomer improves thermal properties of adhesives Type de document : texte imprimé Auteurs : Irina Kobylanska, Auteur ; David Ley, Auteur ; Jai Venkatesan, Auteur Année de publication : 2009 Article en page(s) : p. 26-31 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Adhésifs -- Propriétés thermiques
IsocyanatesIndex. décimale : 668.3 Adhésifs et produits semblables Résumé : Use of tertiary isocyanate simplifies production of solvent-free polyurethane dispersions, as viscosity in production can be reduced by heat rather than solvents. Adhesives based on the tertiary isocyanate m-TMXDI combine improved heat activation and heat resistance with greater freedom to modify the fundamental polymer structure. En ligne : https://drive.google.com/file/d/1Inx58e889NiEVnS27F-9I0QjdkLp8o7S/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=3334
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 01/2009 (01/2009) . - p. 26-31[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 010994 - Périodique Bibliothèque principale Documentaires Disponible How adhesives reduce emissions, minimize waste and improve recycling / Sally Sinai in JEC COMPOSITES MAGAZINE, N° 61 (12/2010)
[article]
Titre : How adhesives reduce emissions, minimize waste and improve recycling Type de document : texte imprimé Auteurs : Sally Sinai, Auteur Année de publication : 2010 Article en page(s) : p. 34-36 Langues : Anglais (eng) Tags : 'Adhésifs structuraux' 'Chimie verte' Recyclage Epoxy Polyuréthanes 'Polyméthacrylate méthyle' 'Matériaux automobile' Index. décimale : 668.3 Adhésifs et produits semblables Résumé : Environmental conditions and anything that can affect issues such as global warming and heavy metals are gaining considerable attention from both consumers and regulatory agencies. The more governments and consumers become educated and aware, the more demanding they become for materials and processes that will address their environmental concerns. As a result, we see increased demands from these groups for improved technologies that will help reduce hazardous air and ground pollutants, whilst affording some level of reusability without sacrificing performance. Note de contenu : - The use of structurally green adhesives
- Adding value
- What is "green" structural adhesive ? : Epoxies - Urethanes - Methyl methacrylates
- Other joining methods
- Green case studyEn ligne : http://www.jeccomposites.com/news/composites-news/how-adhesives-reduce-emissions [...] Format de la ressource électronique : Web Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=13779
in JEC COMPOSITES MAGAZINE > N° 61 (12/2010) . - p. 34-36[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 012656 - Périodique Bibliothèque principale Documentaires Disponible How can structural adhesives help automakers tackle a weighty issue ? / Danielle Hunter in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 22, N° 3 (03/2015)
[article]
Titre : How can structural adhesives help automakers tackle a weighty issue ? : A materials supplier explores how structural adhesives can help automakers to achieve their lightweighting goals Type de document : texte imprimé Auteurs : Danielle Hunter, Auteur Année de publication : 2015 Langues : Américain (ame) Catégories : Adhésifs dans les automobiles
Adhésifs structuraux
Assemblages collés
Epoxydes
Matériaux -- Allègement
PolyuréthanesIndex. décimale : 668.3 Adhésifs et produits semblables Résumé : Automakers’ search for lighter materials and more fuel-efficient vehicles is a well-covered topic. But there are more layers to the story than the headlines suggest. Bayer set out to determine how structural adhesives can help automakers achieve their goals. We went to the source: OEMs, tier suppliers and academic researchers who work daily to solve these challenges. En ligne : http://www.adhesivesmag.com/articles/93999-how-can-structural-adhesives-help-aut [...] Format de la ressource électronique : Web Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=24355
in ADHESIVES & SEALANTS INDUSTRY (ASI) > Vol. 22, N° 3 (03/2015)[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 17053 - Périodique Bibliothèque principale Documentaires Disponible How can structural adhesives help automakers tackle a weighty issue ? / Danielle Hunter in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 22, N° 7 (07/2015)
[article]
Titre : How can structural adhesives help automakers tackle a weighty issue ? : A materials supplier explores how structural adhesives can help automakers to achieve their lightweighting goals Type de document : texte imprimé Auteurs : Danielle Hunter, Auteur Année de publication : 2015 Langues : Américain (ame) Catégories : Adhésifs dans les automobiles
Assemblages collés
Matériaux -- AllègementIndex. décimale : 668.3 Adhésifs et produits semblables Résumé : Automakers’ search for lighter materials and more fuel-efficient vehicles is a well-covered topic. But there are more layers to the story than the headlines suggest. Bayer set out to determine how structural adhesives can help automakers achieve their goals. We went to the source: OEMs, tier suppliers and academic researchers who work daily to solve these challenges. En ligne : http://www.adhesivesmag.com/articles/93999-how-can-structural-adhesives-help-aut [...] Format de la ressource électronique : Web Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=25685
in ADHESIVES & SEALANTS INDUSTRY (ASI) > Vol. 22, N° 7 (07/2015)[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 17337 - Périodique Bibliothèque principale Documentaires Disponible How do stabilizers improve durability ? in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 27, N° 4 (04/2020)
[article]
Titre : How do stabilizers improve durability ? : Raw materials in adhesives and sealants formulations are often protected from degradation by suitable stabilizer packages or through appropriate packaging Type de document : texte imprimé Année de publication : 2020 Article en page(s) : p. 26-30 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Additifs
Antioxydants
Colles:Adhésifs
Mastics
Stabilisant à la lumière de type amine encombrée
Stabilisants (chimie)Index. décimale : 668.3 Adhésifs et produits semblables Résumé : Stabilizing additives such as antioxidants (AOs), ultraviolet (UV) absorbers, and hindered amine light stabilizers enable formulators to create durable adhesives and sealants, thereby extending the life of adhesively bonded goods. These high-performance products are key contributors to sustainable product development and help to promote the advancement of a circular economy.
Although often invisible, adhesives and sealants are part of our daily lives. They ensure that our food is packaged and advertised safely, that our houses are wind- and waterproof, and that our communication and mobility needs are served in safe and efficient ways. Thousands of everyday items such as mobile phones, washing machines, personal hygiene products, shoes, clothing, building products, batteries, automobiles, rail cars, ships, and airplanes are nowadays only practical due to the use of high-performing adhesives and sealants.
A broad range of chemistries and polymeric organic materials is required to cover the multitude of adhesive and sealant bonding parameters. Adhesive formulators have taken on the challenge and created the art of matching bonding performance requirements with products and application processes. Their core expertise lies in selecting chemistries, curing mechanisms, and raw materials and combining them to create a product that can be processed efficiently and economically in the respective application environment. Polymers and organic materials have an inherent tendency to change properties and degrade throughout their value chain—from manufacturing, processing, transportation, and storage right to end use.Note de contenu : - Incorporation and processing
- Enabling high-performance formulations
- Fig. 1 : Overview of degradation causes and stabilization effects along the value chain
- Fig. 2 : Protection effects of antioxidants (AOs), UV absorbers (UVSs), and hindered amine light stabilizers (HALS)
- Table 1 : Typical structuresEn ligne : https://www.adhesivesmag.com/articles/97681-how-do-stabilizers-improve-durabilit [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=34047
in ADHESIVES & SEALANTS INDUSTRY (ASI) > Vol. 27, N° 4 (04/2020) . - p. 26-30[article]Réservation
Réserver ce document
Exemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité 21660 - Périodique Bibliothèque principale Documentaires Disponible 21869 - Périodique Bibliothèque principale Documentaires Disponible How do we increase the thermal resistance of anaerobic adhesives ? / Dave Dun in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 25, N° 9 (09/2018)
PermalinkPermalinkHow substrate variation affects adhesive bond safety / Martin Brandtner-Hafner in ADHESION - ADHESIVES + SEALANTS, Vol. 18, N° 4/2021 (2021)
PermalinkHow to choose a mixing partner / Todd Hutchinson in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 16, N° 1 (01/2009)
PermalinkHow to control aggression / Juergen Schneider in ADHESIVE TECHNOLOGY, Vol. 17, N° 4 (09/2000)
PermalinkHow to reliably connect temperature-sensitive materials / Ralf Hose in ADHESION - ADHESIVES + SEALANTS, N° 3/2010 (2010)
PermalinkPermalinkHybrid polymers for high-strength adhesive / Florian Degenhart in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 203, N° 4588 (09/2013)
PermalinkHydrogenated DCPD-based resins for SBC-based hot-melt PSAs / Jungjoon Lee in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 19, N° 1 (01/2012)
PermalinkHydrophobically modified polyacrylic acids for WB tackifying resin dispersion / Brian J. Vondruska in ADHESIVES AGE, Vol. 40, N° 5 (05/1997)
PermalinkHydroxyl-terminated polybutadiene liquid resins for adhesives applications / Taejun Yoo in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 24, N° 1 (01/2017)
PermalinkHyghly hydrophobic pyrogenic silica for industrial adhesive in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 209, N° 4652 (06/2019)
PermalinkIcreasing production uptime and throughput in packaging applications / Chris Graff in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 23, N° 2 (02/2016)
PermalinkIdentifying variations in cross-linked epoxies / Kiersten M. Smith in ADHESION - ADHESIVES + SEALANTS, Vol. 19, N° 3/2022 (2022)
PermalinkImpact of EVA based hot melts on paper recycling / Neil R. Jarvis in ADHESIVES AGE, Vol. 38, N° 11 (11/1995)
PermalinkImproved adhesives / Anita Neau in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 195, N° 4492 (09/2005)
PermalinkImproved dispensing for solar inverters / Christian Ostermeier in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 20, N° 8 (08/2013)
PermalinkImproved rheological quality control tests for today's adhesives and sealants / David Moonay in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 21, N° 10 (10/2014)
PermalinkImprovements in aqueous acrylic pressure sensitive adhesives / Oliver Nickel in ADHESION - ADHESIVES + SEALANTS, N° 9/2005 (09/2005)
PermalinkImproving adhesion of high vinyl (SVS) polymers using modified diblocks / D. F. Graves in ADHESIVES AGE, Vol. 40, N° 12 (11/1997)
PermalinkImproving adhesive performance / Jörg-Ulrich Zilles in ADHESION - ADHESIVES + SEALANTS, N° 1/2010 (2010)
PermalinkImproving assembly with fastener and component enhancement materials / William Mackowski in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 21, N° 9 (09/2014)
PermalinkImproving composite door production in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 19, N° 7 (07/2012)
PermalinkPermalinkImproving hot melt performance / Eric Moussu in ADHESIVE TECHNOLOGY, Vol. 15, N° 4 (12/1998)
PermalinkImproving performance of hot-melt packaging adhesives / P. Rajesh Raja in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 20, N° 10 (10/2013)
PermalinkImproving polymer chemistries / Michelle Moss in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 18, N° 10 (10/2011)
PermalinkImproving the performance of reactive adhesives / Jan Lenz in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 203, N° 4588 (09/2013)
PermalinkImproving the quality and efficiency of adhesives in the glass industry / Dave Bordwell in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 22, N° 11 (11/2015)
PermalinkImproving the thermal stability of MS polymers with lignin fractions / Hanne Mariën in ADHESION - ADHESIVES + SEALANTS, Vol. 19, N° 3/2022 (2022)
PermalinkImproving yield in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 18, N° 8 (08/2011)
PermalinkIn the heat of the night in ADHESIVE TECHNOLOGY, Vol. 19, N° 3 (06/2002)
PermalinkIncrease productivity / Martin Reinecke in EUROPEAN ADHESIVES & SEALANTS (EAS), Vol. 21, N° 3 (09/2004)
PermalinkIndependent testing / David M. Westerfield in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 19, N° 10 (10/2012)
PermalinkIndustrial displays and touch panels / Daniel Lenssen in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 19, N° 10 (10/2012)
PermalinkIndustrial gums / Roy L. Whistler / New York [Etats-Unis] : Academic Press inc. (1973)
PermalinkIndustrie aéronautique. Adhésifs pour structures d'aéronefs en bois / Bureau de Normalisation de l'Aéronautique et de l'Espace / Issy-les-Moulineaux : BNAE (1995)
PermalinkIndustrie des rubans adhésifs. Mesure de l'allongement sous charge statique - Norme NF EN 12028 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1996)
PermalinkIndustrie des rubans adhésifs. Mesure de la force de déroulement à faible vitesse - Norme NF EN 1944 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1996)
PermalinkIndustrie des rubans adhésifs. Mesure de la force de déroulement à faible vitesse - Norme NF EN 1944 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1996)
PermalinkIndustrie des rubans adhésifs. Mesure de la force au déroulement à grande vitesse - Norme NF EN 12026 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1996)
PermalinkIndustrie des rubans adhésifs. Mesure de la liaison des rubans thermodurcissables pendant le traitement thermique - Norme NF EN 12032 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1996)
PermalinkIndustrie des rubans adhésifs. Mesure de la longueur d'un rouleau de ruban adhésif - Norme NF EN 12034 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1996)
PermalinkIndustrie des rubans adhésifs. Mesure du pouvoir d'agrippage - Norme NF EN 1945 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1996)
PermalinkIndustrie des rubans adhésifs. Mesure de la résistance au déchirement par la métohde du pendule - Norme NF EN 12025 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1996)
PermalinkIndustrie des rubans adhésifs. Mesure de la résistance à l'éclatement - Norme NF EN 12031 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1996)
PermalinkIndustrie des rubans adhésifs. Mesure de la résistance à la flamme - Norme NF EN 12027 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1996)
PermalinkIndustrie des rubans adhésifs. Mesure de la résistance à l'impact - Norme NF EN 12030 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1996)
PermalinkIndustrie des rubans adhésifs. Mesure de la tenue à la température et humidité élevées - Norme NF EN 12024 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1996)
PermalinkIndustrie des rubans adhésifs. Mesure de la transmission de vapeur d'eau en atmosphère chaude et humide - Norme NF EN 12023 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1996)
PermalinkIndustrie des rubans adhésifs. Mise en drapeau des rubans adhésifs - Norme NF EN 12035 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1996)
PermalinkIndustrie des rubans adhésifs. Mise de la pénétration des solvants dans les rubans adhésifs de masquage - Norme NF EN 12036 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1996)
PermalinkIndustrie des rubans adhésifs. Terminologie - Norme NF EN 12481 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1996)
PermalinkIndustrie des rubans adhésifs. Terminologie des termes utilisés - Norme NF X 41-102 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1986)
PermalinkPermalinkInfinite possibilities in ADHESIVE TECHNOLOGY, Vol. 18, N° 3 (09/2001)
PermalinkInfluence of polyol unsaturation on urethane properties / Thomas Fishback in ADHESIVES AGE, Vol. 39, N° 7 (06/1996)
PermalinkInfluence du pelage d'adhésifs acryliques. Influence de la réticulation / C. Verdier in LES CAHIERS DE RHEOLOGIE, Vol. XVI, N° 1 (10/1998)
PermalinkInfluence des propriétés rhéologiques d'adhésifs thermofusibles industriels sur les propriétés au pelage / F. X. Gibert in LES CAHIERS DE RHEOLOGIE, Vol. XVI, N° 1 (10/1998)
PermalinkPermalinkInks for the future / Nicklas Olsson in EUROPEAN ADHESIVES & SEALANTS (EAS), Vol. 20, N° 1 (03/2003)
PermalinkInline surface activation in the injection molding process for high adhesive strength / Elmar Moritzer in ADHESION - ADHESIVES + SEALANTS, Vol. 14, N° 4/2017 (2017)
PermalinkPermalinkInnovative adhesive for product safety / Monika Tönnißen in ADHESION - ADHESIVES + SEALANTS, Vol. 17, N° 4/2020 (2020)
PermalinkInnovative assessment concept for qualitative adhesive selection / Martin Brandtner-Hafner in ADHESION - ADHESIVES + SEALANTS, Vol. 16, N° 2/2019 (2019)
PermalinkInnovative contact-free material testing method / Balthasar Fischer in ADHESION - ADHESIVES + SEALANTS, Vol. 16, N° 3/2019 (2019)
PermalinkInnovative crosslinkers / Florian Degenhart in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 202, N° 4575 (08/2012)
PermalinkInnovative dispensing technology for material formulators / David Mandeville in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 20, N° 8 (08/2013)
PermalinkInnovative dispensing technology for two-component adhesives and sealants in ADHESION - ADHESIVES + SEALANTS, Vol. 17, N° 2/2020 (2020)
PermalinkInnovative label adhesives meet today's packaging demands / Kim Hensley in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 22, N° 5 (05/2015)
PermalinkInnovative method for laminating wood-based panels in ADHESION - ADHESIVES + SEALANTS, Vol. 16, N° 3/2019 (2019)
PermalinkInsect and rodent traps : hot melt adhesive application - A review / Ravindra V. Gadhave in PAINTINDIA, Vol. LXXIII, N° 7 (07/2023)
PermalinkInstrument provides reliable monitoring of cure progress / Eric A. Sheard in ADHESIVES AGE, Vol. 40, N° 3 (03/1997)
PermalinkIntegrating adhesives with assembly / Cory Sauer in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 24, N° 3 (03/2017)
PermalinkIntroduction to farnesene-based polyols / Herbert Chao in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 25, N° 4 (04/2018)
PermalinkIsocyanate-free adhesive technology minimises cure times / Michael Gierlings in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 200, N° 4549 (06/2010)
PermalinkIsocyanurate-containing urethane adhesive with improved heat stability / C. L. Wang in ADHESIVES AGE, Vol. 37, N° 13 (12/1994)
PermalinkJADH'99 / JADH'99 (26 septembre - 1er octobre 99; La Bourboule (Auvergne), France) / Paris : Société Française du Vide (1999)
PermalinkJoining and disjoining concepts for adhesive bonded lightweight structures / Jan Ditter in ADHESION - ADHESIVES + SEALANTS, Vol. 16, N° 3/2019 (2019)
PermalinkJoining concept and feasibility studies with steel pipes / Ortwin Hahn in ADHESION - ADHESIVES + SEALANTS, N° 2/2010 (2010)
PermalinkJoining of dissimilar materials through adhesive bonding / S. F. McCleary in ADHESIVES AGE, Vol. 38, N° 2 (02/1995)
PermalinkJoining processes in the assembly shop / Alexander Daniel in ADHESION - ADHESIVES + SEALANTS, N° 2/2015 (2015)
PermalinkPermalinkJonctions hybrides boulonnées-collées / Jean-François Ramière in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 20, N° 2 (05-06-07-08/2010)
PermalinkKeeping odor and flames at bay with VAE dispersions in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 21, N° 5 (05/2014)
PermalinkKeeping the work atmosphere clean of volatile organic compounds / Stephen H. Klostermeyer in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 26, N° 4 (04/2019)
PermalinkKey to development of corrosion-resistant materials / Karl-Heinz Stellnberger in ADHESION - ADHESIVES + SEALANTS, N° 2/2013 (2013)
PermalinkLaboratory automation for new adhesive formulations in ADHESION - ADHESIVES + SEALANTS, Vol. 19, N° 4/2022 (2022)
PermalinkLaminated beam plant converts to automated adhesive application in ADHESIVES AGE, Vol. 38, N° 3 (03/1995)
PermalinkLaser-based adhesive bonding of grinding segments / Christian Hennigs in ADHESION - ADHESIVES + SEALANTS, Vol. 13, N° 3/2016 (2016)
PermalinkLatent amine addresses needs for one-package epoxy adhesives / Dilip N. Shah in ADHESIVES AGE, Vol. 40, N° 13 (12/1997)
PermalinkLatent-reactive and storable / Jörg Büchner in ADHESION - ADHESIVES + SEALANTS, N° 9/2007 (09/2007)
PermalinkLatest generation of polyurethane matrix resins / Holger Elfes in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 204, N° 4594 (03/2014)
PermalinkA latex alternative / William R. Doyle in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 17, N° 8 (08/2010)
PermalinkPermalinkLet there be LEDs in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 17, N° 3 (03/2010)
PermalinkLight-colour tackifying resins for hot melts / Michel Faissat in ADHESIVE TECHNOLOGY, Vol. 15, N° 3 (09/1998)
PermalinkLight-curable opportunities / Virginia Read in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 17, N° 7 (07/2010)
PermalinkLight curing adhesives / Michael Stumbeck in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 196, N° 4502 (07/2006)
PermalinkLight curing adhesives in electronics manufacturing : three case studies / Peter Swanson in ADHESIVES AGE, Vol. 39, N° 13 (12/1996)
PermalinkPermalinkPermalinkLight switchable adhesives debond on demand / Daniel Jacobsson in ADHESION - ADHESIVES + SEALANTS, N° 1/2010 (2010)
PermalinkLighter cars thanks to tape / Gunnar Von Der Geest in ADHESION - ADHESIVES + SEALANTS, Vol. 13, N° 4/2016 (2016)
PermalinkLighter, safer and stronger / Frank Billotto in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 24, N° 9 (09/2017)
PermalinkPermalinkLightweight construction of a multipurpose vehicle cabin / Simon Stahl in ADHESION - ADHESIVES + SEALANTS, Vol. 14, N° 4/2017 (2017)
PermalinkLignin in the laboratory / Mitchell Dale in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 21, N° 3 (03/2014)
PermalinkLinking new product strategy and tactics with forecasts / Marc Benevento in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 22, N° 9 (09/2015)
PermalinkLiquid-modified pur MDI / Johan van Tongelen in ADHESIVE TECHNOLOGY, Vol. 15, N° 3 (09/1998)
PermalinkLiquid polysulfide polymers for chemical- and solvent-resistant sealants / Volker burkhardt in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 25, N° 8 (08/2018)
PermalinkLiquid reactive polymers for radiation curable high performance PSAs / James R. Erickson in ADHESIVES AGE, Vol. 38, N° 11 (11/1995)
PermalinkLoad-bearing behaviour of rods glued in hardwood / Olivier Bletz-Mühldorfer in ADHESION - ADHESIVES + SEALANTS, Vol. 15, N° 4/2018 (2018)
PermalinkLoad optimized bonding / André Knapp in ADHESION - ADHESIVES + SEALANTS, Vol. 13, N° 3/2016 (2016)
PermalinkPermalinkLow emission for the furniture industry / Christopher Funke in ADHESION - ADHESIVES + SEALANTS, Vol. 13, N° 3/2016 (2016)
PermalinkLow-emitting green adhesives bring improvement to indoor air quality / Marylin Black in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 16, N° 5 (05/2009)
PermalinkLow molecular weight polyisoprenes offer versatility in bonding techniques / Thomas Meeker in ADHESIVES AGE, Vol. 41, N° 7 (07/1998)
PermalinkLow monol polyether polyols offer new opportunities for sealant manufacturers / Curt Reichel in ADHESIVES AGE, Vol. 40, N° 1 (01/1997)
PermalinkLow-shear dosing of micro-encapsulated adhesives / Christoph Sacher in ADHESION - ADHESIVES + SEALANTS, N° 2/2013 (2013)
PermalinkLow surfaces energy substrates present bonding challenges in ADHESIVES AGE, Vol. 39, N° 11 (10/1996)
PermalinkLow-volatile pure monomer resins / P. Rajesh Raja in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 20, N° 7 (07/2013)
PermalinkLowering the heat / Misty Huang in EUROPEAN ADHESIVES & SEALANTS (EAS), Vol. 20, N° 3 (09/2003)
PermalinkPermalinkMaïs. Détermination de la teneur en eau (sur grains broyés et sur grains entiers) - Norme NF V 03-708 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1976)
PermalinkMaking adhesives tougher with weaker bonds in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 27, N° 4 (04/2020)
PermalinkPermalinkMaking industrial adhesives tougher / Stephan Sprenger in EUROPEAN COATINGS JOURNAL (ECJ), N° 3/2009 (03/2009)
PermalinkMaking things stick when the going gets tough / Elisabeth Theunissen in EUROPEAN COATINGS JOURNAL (ECJ), N° 5 (05/2013)
PermalinkManaging intellectual property effectively / Wendy Buskop in ADHESIVES AGE, Vol. 38, N° 6 (05/1995)
PermalinkManuel des techniques de collage / Gerhard Fauner / Paris : Soproge S.A. (1984)
PermalinkPermalinkMaterial and product intelligence for the adhesives and sealants industry in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 21, N° 5 (05/2014)
PermalinkMaterial preparation for high-precision volumetric dispensing / Andreas Grünfelder in ADHESION - ADHESIVES + SEALANTS, Vol. 20, N° 4/2023 (2023)
PermalinkMatériel roulant ferroviaire. Assemblage par collage - Norme NF F 01-811 / Bureau de Normalisation des Chemins de Fer / Paris : BNCF (1989)
PermalinkMatériel roulant ferroviaire. Films adhésifs antigraffiti - Norme NF F 19-483 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1998)
PermalinkMaximizing quality and cost benefits with structural adhesive testing / Andrew DeWolfe in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 21, N° 10 (10/2014)
PermalinkMaximum radiation intensity based on end-fused optical fiber bundles / Holger Bäuerle in ADHESION - ADHESIVES + SEALANTS, Vol. 17, N° 2/2020 (2020)
PermalinkMDI-based urethane prepolymers as binders / Danielle Moore in ADHESIVE TECHNOLOGY, Vol. 15, N° 1 (03/1998)
PermalinkMeasures and systemic limitations / Daniel Geier in ADHESION - ADHESIVES + SEALANTS, N° 2/2015 (2015)
PermalinkMeasuring and regulating flammability / Todd Holder in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 19, N° 2 (02/2012)
PermalinkMécanisme d'adhésion à l'interface adhésif sensible à la pression (PSA)/réseaux silicone : rôle de la formulation / Laurence Vrevin / 2001
PermalinkMechanical dispensing system offers precision and economy in ADHESIVES AGE, Vol. 41, N° 10 (10/1998)
PermalinkMechanical vs. adhesive bonds in assembly / Antoine Curet in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 20, N° 10 (10/2013)
PermalinkPermalinkPermalinkMeeting modern challenges in bonding to automotive TPO materials in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 27, N° 2 (02/2020)
PermalinkMeeting more stringent sustainability standards / Patrick Vandereecken in ADHESION - ADHESIVES + SEALANTS, N° 4/2010 (2010)
PermalinkPermalinkPermalinkMercury-free polyurethane adhesives / Frank Tran in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 17, N° 7 (07/2010)
PermalinkMetallic coagents increase adhesion of rubber to metal / Richard Costin in ADHESIVES AGE, Vol. 38, N° 4 (04/1995)
PermalinkMeter/mix/dispensing for polyurethane elastomeres / David Mandeville in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 19, N° 9 (09/2012)
PermalinkMethyl methacrylate adhesives for architectural PVC / Jim Yeames in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 18, N° 9 (09/2011)
PermalinkMethylene chloride among chemicals targeted by EPA / Colin Campbell in ADHESIVES AGE, Vol. 42, N° 10 (10/1999)
PermalinkMicroporous Polypropylene Films for Tape and Label Applications / Philip Jacoby in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 16, N° 1 (01/2009)
PermalinkPermalinkPermalinkMigration of plasticisers from adhesives / Emerald Kalama in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 205, N° 4612 (09/2015)
PermalinkMimicking gecko feet / John Toon in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 16, N° 1 (01/2009)
PermalinkPermalinkMixer increases efficiency of epoxy production AT ITW Philadelphia resins in ADHESIVES AGE, Vol. 38, N° 7 (06/1995)
PermalinkMixing and dispersing silicones / Stephanie Shira in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 21, N° 8 (08/2014)
PermalinkPermalinkMobile dosing unit for the application of joint sealants / Axel Huwald in ADHESION - ADHESIVES + SEALANTS, Vol. 17, N° 1/2020 (2020)
PermalinkModern analysis methods analysis methods for polyolefin compounds in ADHESION - ADHESIVES + SEALANTS, Vol. 18, N° 1/2021 (2021)
PermalinkModern design enabled by greener, cleaner sealant technology / Brian R. White in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 26, N° 11 (11/2019)
PermalinkModern waterborne contact adhesive : 1K application with 2K property level / Peter Küker in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 207, N° 4632 (06/2017)
PermalinkModified gum rosins / Jens Adolf Döhle in EUROPEAN ADHESIVES & SEALANTS (EAS), Vol. 20, N° 2 (06/2003)
PermalinkModular and flexible automated pail processing / Jim Manoussakis in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 21, N° 1 (01/2014)
PermalinkMoisture-permeable polyurethanepressure-sensitive adhesive addresses needs of wearable devices / Makito Nakamura in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 27, N° 5 (05/2020)
PermalinkPermalinkMore durable epoxy bonds to wood with hydroxymethylated resorcinol coupling agent / Charles B. Vick in ADHESIVES AGE, Vol. 40, N° 8 (07/1997)
PermalinkMore efficient, more economical, and with better quality / Christian Terfloth in ADHESION - ADHESIVES + SEALANTS, N° 3/2010 (2010)
PermalinkPermalinkPermalink"More sustainability is a defining factor for our future" / Ingrid Sebald in ADHESION - ADHESIVES + SEALANTS, Vol. 20, N° 1/2023 (2023)
PermalinkMortiers de joints et colles à carrelage. Partie 1 : Détermination de la résistance chimique des mortiers à base de résines réactives - Norme NF EN 12808-1 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1999)
PermalinkMov'eo présente une première mondiale in GALVANO ORGANO, N° 794 (06-07/10/2010)
PermalinkPermalinkMoving more with less CO2 : bonding in the automotive industry in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 204, N° 4601 (10/2014)
PermalinkMS sealants : A comparative study of performance properties / Allan Hutchinson in ADHESIVES AGE, Vol. 39, N° 4 (04/1996)
PermalinkPermalinkMultiple solutions for hot melt applications / Sealock Ltd (Walworth, United Kingdom) in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 203, N° 4582 (03/2013)
PermalinkMussels inspire innovative new adhesive for surgery in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 20, N° 5 (05/2013)
PermalinkPermalinkDes nanomatériaux imitent les capacités adhésives des pattes du gecko / Delphine Huguet in BIOFUTUR, N° 294 (12/2008)
Permalinknasal strip adhesion / Marc Johnson in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 20, N° 10 (10/2013)
PermalinkPermalinkPermalinkNeoprene latices in compounding resins / Lance Christell in ADHESIVES AGE, Vol. 37, N° 12 (11/1994)
PermalinkNew adhesives for print / Hans-Joachim Fricke in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 195, N° 4486 (03/2005)
PermalinkPermalinkNew benzoate plasticizers for latex adhesives / William D. Arendt in ADHESIVES AGE, Vol. 41, N° 3 (03/1998)
PermalinkPermalink