Accueil
Catégories
> Polyamide 12
Polyamide 12Voir aussi
|
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
Crimping of island-in-the-sea microfibers for air filtration media / Lukas Herrmann in MAN-MADE FIBERS INTERNATIONAL, Vol. 73, N° 4 (2023)
[article]
Titre : Crimping of island-in-the-sea microfibers for air filtration media Type de document : texte imprimé Auteurs : Lukas Herrmann, Auteur Année de publication : 2023 Article en page(s) : p. 34-39 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Fils multifilaments
Filtration
Filtres à air
Microfibres
Polyamide 12
SertissageIndex. décimale : 677.4 Textiles artificiels Résumé : Energy and resource efficiency are crucial in the context of the energy transition. The building sector in particular is a major contributor to climate-damaging greenhouse gas (GHG) emissions. In order to reduce these emissions, a significant increase in energy efficiency in residential buildings is highly relevant. Ventilation systems with heat recovery have a big impact on reducing energy consumption of residential buildings. Promoting the increased use of these systems in residential buildings could make a decisive contribution to achieving the goals of the energy transition. Note de contenu : - Production innovation
- Requirements for ail filter media
- Process development
- Fiber innovation
- Microfiber crimping results and discussion
- Fig. 1 : Calculation program for filter efficiency and pressure drop
- Fig. 2 : Island-in-the-sea microfiber multifilament yarn
- Fig. 3 : Measurement of crimp contraction according to standard
- Fig. 4 : Crimp contraction and crimp geometries
- Fig. 5 : Crimped island-in-the-sea multifilament yarn/crimped PA12 microfiber multifilament yarnEn ligne : https://drive.google.com/file/d/1pRSpBETI14eYVPjgIYfGvPWJSkcxRFim/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=40535
in MAN-MADE FIBERS INTERNATIONAL > Vol. 73, N° 4 (2023) . - p. 34-39[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 24343 - Périodique Bibliothèque principale Documentaires Disponible Étude des relations structure-rhéologie de composites polyamide/talc synthétique / J. Beuguel in RHEOLOGIE, Vol. 27 (06/2015)
[article]
Titre : Étude des relations structure-rhéologie de composites polyamide/talc synthétique Type de document : texte imprimé Auteurs : J. Beuguel, Auteur ; J. Ville, Auteur ; J. Crepin-Leblond, Auteur ; P. Médéric, Auteur ; T. Aubry, Auteur Année de publication : 2015 Article en page(s) : p. 12-23 Note générale : Bibliogr. Langues : Français (fre) Catégories : Charges (matériaux)
Matériaux hybrides
Polyamide 12
Polyamide 6
Rhéologie
TalcIndex. décimale : 532.05 Mécanique des fluides et des liquides - Dynamique (cinétique et cinématique) Résumé : Les microcomposites polyamide/talc naturel sont largement utilisés dans les domaines de l’automobile et de l’emballage. Dans un contexte de développement des nanocomposites à base d’argile lamellaire, la synthèse de nanoparticules de talc a pour objectif l’élaboration de nanocomposites polyamide/talc synthétique potentiellement susceptibles de concurrencer des nanocomposites conventionnels polyamide/montmorillonite modifiée. Cette étude vise à comparer les propriétés structurales et rhéologiques de composites élaborés à partir d’une matrice polyamide (PA6 ou PA12) et d’un hydrogel de talc synthétique à celles de microcomposites polyamide/talc naturel et de nanocomposites polyamide/montmorillonite modifiée, en considérant l’effet de la nature de la matrice polyamide et de la fraction volumique de charges. Les systèmes sont obtenus par malaxage à l'état fondu, à la mini-extrudeuse. D’un point de vue structural, les observations par microscopie électronique à balayage ou en transmission révèlent que la taille des particules de talc synthétique, dispersées dans les matrices polyamides, se situe entre celle des particules des nanocomposites polyamide/montmorillonite modifiée et celle des entités argileuses des microcomposites polyamide/talc naturel. Les résultats montrent que l’utilisation de la matrice PA6, plus polaire que le PA12, améliore légèrement la finesse des particules nanométriques de talc synthétique. Les résultats de la caractérisation rhéologique menée en viscoélasticité linéaire sont en accord avec ceux issus de la caractérisation structurale. En effet, alors que le seuil de percolation apparaît à une fraction volumique critique de 1% pour les nanoparticules de montmorillonite modifiée et de 10% pour les microparticules de talc naturel, il apparaît à une fraction de 5% (matrice PA6) ou 6% (matrice PA12) pour le talc synthétique. L’ensemble des résultats de cette étude tend à montrer que l’état de dispersion des charges et les caractéristiques rhéologiques des systèmes polyamides/talc synthétique sont proches de ceux des nanocomposites polyamides/montmorillonite modifiée, plus particulièrement dans le cas de la matrice polyamide 6, sans toutefois pouvoir les atteindre, en raison de la présence de particules micrométriques, voire millimétriques. Note de contenu : - MATERIAUX ET METHODES : Matériaux - Elaboration des échantillons - Techniques de caractérisation
- RESUTATS ET DISCUSSION : Caractérisation structurale - Caractérisation rhéologiqueEn ligne : http://www.legfr.fr/larevue/?Page=article&Vol=0027&NumArticle=1 Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=28949
in RHEOLOGIE > Vol. 27 (06/2015) . - p. 12-23[article]From abrasion resistant to self-healing / Michael Beyer in KUNSTSTOFFE PLAST EUROPE, Vol. 93, N° 6/2003 (06/2003)
[article]
Titre : From abrasion resistant to self-healing Type de document : texte imprimé Auteurs : Michael Beyer, Auteur ; Ursula Keil, Auteur Année de publication : 2003 Article en page(s) : p. 30-32 Langues : Anglais (eng) Catégories : Elastomères
Polyamide 12
Polymères autoréparantsIndex. décimale : 668.4 Plastiques, vinyles Résumé : High-performance elastomers - Polyamide 12 elastomers stand out from competing thermoplastic moulding compounds thanks to a wide range of high-quality elastic properties. They are therefore used both for demanding precision injection-moulding parts and for select extrusion applications in the sports equipment and automotive sectors. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=7189
in KUNSTSTOFFE PLAST EUROPE > Vol. 93, N° 6/2003 (06/2003) . - p. 30-32[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 011075 - Périodique Bibliothèque principale Documentaires Disponible From fuel line to gas pipe / Markus Hartmann in KUNSTSTOFFE INTERNATIONAL, Vol. 104, N° 6 (06/2014)
[article]
Titre : From fuel line to gas pipe : Pipes made of PA12 for channeling hydrocarbon-containing media Type de document : texte imprimé Auteurs : Markus Hartmann, Auteur ; Karl Kuhmann, Auteur Année de publication : 2014 Article en page(s) : p. 51-53 Langues : Anglais (eng) Catégories : Matières plastiques -- Extrusion
Polyamide 12
Tubes
Tuyaux de gazIndex. décimale : 668.4 Plastiques, vinyles Résumé : How are thin pipes made into large-volume pipes? To answer this question it is necessary to consider the entire process chain. Plastics manufacturers must develop expert knowledge of the end application if they are to deliver "well-rounded" products. Note de contenu : - Optimizing processing
- Sustainable product development
- Other areas of applicationEn ligne : https://drive.google.com/file/d/1f6uGlDuQ1JG067iJyGX2welAUD2cvK8j/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=21629
in KUNSTSTOFFE INTERNATIONAL > Vol. 104, N° 6 (06/2014) . - p. 51-53[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 16367 - Périodique Bibliothèque principale Documentaires Disponible Geometry-independent surface finishing / Livia Carmen Wiedau in KUNSTSTOFFE INTERNATIONAL, Vol. 111, N° 4 (2021)
[article]
Titre : Geometry-independent surface finishing : Influence of chemical post-treatment on glass-filled polyamide 12 samples Type de document : texte imprimé Auteurs : Livia Carmen Wiedau, Auteur ; Anna Tarasova, Auteur ; Gerd Witt, Auteur Année de publication : 2021 Article en page(s) : p. 46-48 Langues : Anglais (eng) Catégories : Allongement à la rupture
Charges (matériaux)
Composites -- Propriétés mécaniques
Composites à fibres de verre
Frittage laser
Polyamide 12
Résistance à la traction
Rugosité
Traitement chimique
Verre
VitrificationIndex. décimale : 668.4 Plastiques, vinyles Résumé : In many technical applications, laser-sintered components still have inadequate surface topology. New methods of cost-effective and geometry-independent surface finishing of the laser-sintered specimens are therefore needed. Chemical post-treatment of laser-sintered PA12 components imparts enhanced mechanical characteristics as well as a reduction in roughness to ~85 %. Note de contenu : - Growing demand for post-treated additive manufacturing components
- Post-treatment methods
- Experimental setup
- Chemical post-treatment
- Surface roughness reduced
- Influence of process parameters and chemical post-treatment
- Fig. 1 : Elastic modulus and tensile strength of PA12
- Fig. 2 : Influence of post-treatment on glass-filled PA12
- Fig. 3 : Elastic modulus and tensile strength of glass-filled PA12
- Fig. 4 : Elongation at break of glass-filed PA12
- Table 1 : Process parameters for tensile specimens made of glass-filled and unfilled PA12En ligne : https://drive.google.com/file/d/13q7b0s0j42nY15AFCCp3a-dA711KyzII/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=35743
in KUNSTSTOFFE INTERNATIONAL > Vol. 111, N° 4 (2021) . - p. 46-48[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 22682 - Périodique Bibliothèque principale Documentaires Disponible High performance without high weight / André Sturzel in KUNSTSTOFFE INTERNATIONAL, Vol. 107, N° 8 (08/2017)
PermalinkPermalinkInfluence of extrusion conditions on fiber breakage along the srew profile during twin screw compounding of glass fiber-reinforced PA / J. Ville in INTERNATIONAL POLYMER PROCESSING, Vol. XXVIII, N° 1 (03/2013)
PermalinkInvestigation into the differences in the selective laser sintering between amorphous and semi-crystalline polymers / C. Yan in INTERNATIONAL POLYMER PROCESSING, Vol. XXVI, N° 4 (09/2011)
PermalinkNew approaches to modifying the impact toughness of RTM components / Markus Henne in JEC COMPOSITES MAGAZINE, N° 90 (06-07/2014)
PermalinkOn the road to a circular economy / Sören Griessbach in KUNSTSTOFFE INTERNATIONAL, Vol. 113, N° 1 (2023)
PermalinkOrganoclay imparts scratch resistance / David Evans in KUNSTSTOFFE INTERNATIONAL, Vol. 107, N° 1-2 (01-02/2017)
PermalinkPA and PETG for continuous fibre co-extrusion technology in JEC COMPOSITES MAGAZINE, N° 146 (06-07/2022)
PermalinkPolymer powders in additive manufacturing / Nicole Rapelius in KUNSTSTOFFE INTERNATIONAL, Vol. 108, N° 8 (08/2018)
PermalinkDes poudres polyamide utilisées comme renfort / G. Evrard in CAOUTCHOUCS & PLASTIQUES, N° 777 (05/1999)
PermalinkPrecision down to the finest web / Eveline Geppert in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 11 (11/2012)
PermalinkProcessing LDS-circuit boards by selective laser sintering / Andreas Wörz in INTERNATIONAL POLYMER PROCESSING, Vol. XXXIV, N° 2 (05/2019)
PermalinkPropriétés rhéologiques et compatibilisation réactive de mélanges de polymères / Michel Moan in LES CAHIERS DE RHEOLOGIE, Vol. XVI, N° 1 (10/1998)
PermalinkRadiation crosslinking of films / Lisa-Maria Wittmann in KUNSTSTOFFE INTERNATIONAL, Vol. 109, N° 10 (10/2019)
PermalinkRefreshing strategies for polyamide-12 powder / Andreas Wegner in KUNSTSTOFFE INTERNATIONAL, Vol. 103, N° 11 (11/2013)
Permalink