Accueil
JEC COMPOSITES MAGAZINE / Mutel, Frédérique . N° 107TransportationMention de date : 08-09/2016 Paru le : 15/09/2016 |
Dépouillements
Ajouter le résultat dans votre panierThe road to success in carbon composites for the automotive market / Sanjay Mazumdar in JEC COMPOSITES MAGAZINE, N° 107 (08-09/2016)
[article]
Titre : The road to success in carbon composites for the automotive market Type de document : texte imprimé Auteurs : Sanjay Mazumdar, Auteur Année de publication : 2016 Article en page(s) : p. 21-23 Langues : Anglais (eng) Catégories : Automobiles -- Matériaux
Composites à fibres de carbone
Études de marchéIndex. décimale : 668.4 Plastiques, vinyles Résumé : Recently, there has been significant focus on developing auto-motive parts using lightweight materials. CAFÉ standards of 54.5 mpg by 2025 and the EU mandate of CCI2 emission levels at 999/km by 2020 are the key drivers of lightweight materi¬als in the global automotive industry. Note de contenu : - Carbon composites
- Expected market growth
- Key challenges and opportunities : Cost reduction - Transformotive technology - Recycling - Repair - Simulation/modeling
- Figure : Carbon fibre potential in the automotive industry in different price scenario
- Table : Automotive classification by type of vehiclePermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=27771
in JEC COMPOSITES MAGAZINE > N° 107 (08-09/2016) . - p. 21-23[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 18289 - Périodique Bibliothèque principale Documentaires Disponible Multimaterial assembly - issues, problems and solutions / Richard Tomasi in JEC COMPOSITES MAGAZINE, N° 107 (08-09/2016)
[article]
Titre : Multimaterial assembly - issues, problems and solutions Type de document : texte imprimé Auteurs : Richard Tomasi, Auteur ; Pierre Chalandon, Auteur ; Cyrille Dalla-Zuanna, Auteur Année de publication : 2016 Article en page(s) : p. 28-31 Langues : Anglais (eng) Catégories : Assemblages (technologie)
Assemblages multimatériauxTags : 'Assemblages multimatériaux' Thermostampage 'Matrix SWOT' 'Procédé WARM-bond' Induction Index. décimale : 668.4 Plastiques, vinyles Résumé : Multi-material assemblies, namely metal structures associated with composite structures, are booming. Indeed, full composite structures for full metal replacement are not always optimal due to thermal mechanical stresses or cost limitations. As a result, current and upcoming developments are moving towards an optimized structure using "the right material in the right place". Note de contenu : - Bonding technology
- Mechanical assembly techniques such as screwing/riveting
- Innovative multi-material assemblies
- WARM-bond hot bonding assembly
- CMT pin and thermostamping assembly
- FIGURES : 1. Assembly technologies according to the demountability principle - 2. Wedge test for several surface preparations - 3. Principle of the WARM-bond process using induction - 4. Examples of pin thermostamping - 5. Hybrid technology comparison
- TABLES : 1. SWOT matrix for bonded assemblies - 2. SWOT matrix for mechanical assemblies - SWOT matrix for the WARM-Bond process using induction - 4. Single lap shear results on joints - 5. SWOT matrix for the CMT pin-thermostamping processPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=27772
in JEC COMPOSITES MAGAZINE > N° 107 (08-09/2016) . - p. 28-31[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 18289 - Périodique Bibliothèque principale Documentaires Disponible A path to the future / Blanca Iturralde in JEC COMPOSITES MAGAZINE, N° 107 (08-09/2016)
[article]
Titre : A path to the future : now is a time for robots Type de document : texte imprimé Auteurs : Blanca Iturralde, Auteur ; Juan Solano, Auteur Année de publication : 2016 Article en page(s) : p. 32-33 Langues : Anglais (eng) Catégories : Automatisation
Avions -- Matériaux
Industries aérospatiales
Industries aérospatiales -- Matériaux
Procédés de fabrication
Robots industrielsIndex. décimale : 670.427 Mécanisation, automatisation, robotisation des opérations Résumé : MTorres has been developing robotic solutions for quite some time to meet the growing needs of the aerospace sector. The aerospace industry is increasingly demanding the integration of robots in its manufacturing processes, for bath fabrication and assembly systems. Note de contenu : - First robotic cell
- Robot accuracy
- Exchangeable head and hybrid solution
FIGURES : 1. Two robots with ATL heads and a rotary table working in a synchronized mode - 2. Robot with AFP head for 2D and 3D lamination process - 3. Hybrid AFP/ATL machine installed at Airbus stade facilities to manufacture the A350 XWB wings skinsPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=27773
in JEC COMPOSITES MAGAZINE > N° 107 (08-09/2016) . - p. 32-33[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 18289 - Périodique Bibliothèque principale Documentaires Disponible Innovative approach for non-flammable transparent FRP in JEC COMPOSITES MAGAZINE, N° 107 (08-09/2016)
[article]
Titre : Innovative approach for non-flammable transparent FRP Type de document : texte imprimé Année de publication : 2016 Langues : Anglais (eng) Catégories : Composites à fibres de verre
Essais de résilience
IgnifugeantsComposé chimique utilisé pour réduire l'inflammabilité. Il peut être incorporé au produit durant sa fabrication ou appliqué ultérieurement à sa surface.
Matières plastiques dans les trainsIndex. décimale : 668.4 Plastiques, vinyles Résumé : Various non-flammability solutions are available for FRP materials, for example the use of halogens, phosphoras or inorganic materials such as ATH or silica, but when a high level of non-flammability is required, a high amount of non-flammabte additives is needed, resulting in FRP performance problems (e.g. high viscosity at impregnation or lower strength). Note de contenu : DEVELOPMENT OF THE LIGHTING COVER : Multilayer composition - Moulding process
- EXPRIMENTAL RESULTS : Total light transmittance - Alcohol flammability test
- FIGURES : 1. Introduction of EXVIEW by newspaper Kahoku Shinpo - 2. Practical application of EXVIEW in a subway station - 3. Old type of polycarbonate cover - 4. Effect of the Claist layer - 5. EXVIEW production process - 6. Effect of a Claist layer in a cone calorimeter test - 7. The Japonese ignition test methodPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=27774
in JEC COMPOSITES MAGAZINE > N° 107 (08-09/2016)[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 18289 - Périodique Bibliothèque principale Documentaires Disponible Specialised dangerous goods tanks for the transport of highly corrosive chemicals in JEC COMPOSITES MAGAZINE, N° 107 (08-09/2016)
[article]
Titre : Specialised dangerous goods tanks for the transport of highly corrosive chemicals Type de document : texte imprimé Année de publication : 2016 Langues : Anglais (eng) Catégories : Camions -- Matériaux
Citernes -- Revêtements protecteurs
Composites à fibres de carbone
Composites thermoplastiques
Copolymère vinyle ester
Matériaux -- Allègement
Résistance chimique
Substances dangereuses -- TransportIndex. décimale : 668.4 Plastiques, vinyles Résumé : Omni Tanker designs and manufactures composite road tankers for the transport of corrosive chemicals. Omni Tanker developed the A and AB road tankers specifically for highly corrosive chemicals. Note de contenu : - Thermoplastic and thermoset materials
- Low weight and chemical resistance
- A high-quality tank liner
- Chemical transportPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=27775
in JEC COMPOSITES MAGAZINE > N° 107 (08-09/2016)[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 18289 - Périodique Bibliothèque principale Documentaires Disponible Cure kinetics of a fast-cure epoxy with silica nanoparticles / Andre Keller in JEC COMPOSITES MAGAZINE, N° 107 (08-09/2016)
[article]
Titre : Cure kinetics of a fast-cure epoxy with silica nanoparticles Type de document : texte imprimé Auteurs : Andre Keller, Auteur ; Clemens Dransfeld, Auteur ; Ambrose C. Taylor, Auteur ; Stephan Sprenger, Auteur ; Klaus Ritter, Auteur ; Kunal Masania, Auteur Année de publication : 2016 Article en page(s) : p. 59-61 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Epoxydes
Nanoparticules
Réticulation (polymérisation)
SiliceLa silice est la forme naturelle du dioxyde de silicium (SiO2) qui entre dans la composition de nombreux minéraux.
La silice existe à l'état libre sous différentes formes cristallines ou amorphes et à l'état combiné dans les silicates, les groupes SiO2 étant alors liés à d'autres atomes (Al : Aluminium, Fe : Fer, Mg : Magnésium, Ca : Calcium, Na : Sodium, K : Potassium...).
Les silicates sont les constituants principaux du manteau et de l'écorce terrestre. La silice libre est également très abondante dans la nature, sous forme de quartz, de calcédoine et de terre de diatomée. La silice représente 60,6 % de la masse de la croûte terrestre continentale.
Thermocinétique
Transition vitreuse
ViscositéIndex. décimale : 668.4 Plastiques, vinyles Résumé : This article describes how the strong exothermic reaction of a fast-cure epoxy can be better controlled with the addition of non-reactive silice nanoparticles, further enhancing the benefits of a fast process, the toughness and the ability to understand the properties of thicker composite parts. Note de contenu : - Cure kinetics of fast-cure epoxy
- Influence of silica nanoparticles
- ModellingPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=27776
in JEC COMPOSITES MAGAZINE > N° 107 (08-09/2016) . - p. 59-61[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 18289 - Périodique Bibliothèque principale Documentaires Disponible Structural health of polymer composites / S. Chaki in JEC COMPOSITES MAGAZINE, N° 107 (08-09/2016)
[article]
Titre : Structural health of polymer composites : non-destructive diagnosis using a hybrid NDT approach Type de document : texte imprimé Auteurs : S. Chaki, Auteur ; W. Harizi, Auteur ; Patricia Krawczak, Auteur ; G. Bourse, Auteur ; M. Ourak, Auteur Année de publication : 2016 Article en page(s) : p. 62-65 Langues : Anglais (eng) Catégories : Composites à fibres de verre
Contrôle non destructif
Détection de dommages (matériaux)
Emission acoustique
Epoxydes
Thermographie
UltrasonsIndex. décimale : 668.4 Plastiques, vinyles Résumé : A hybrid non-destructive testing [NU) approach has heen develaped to characterize composites damage using simultaneously bulk and guided ultrasonic waves, acoustic emission, and passive and active infrared thermography. Combining multiple NDT techniques makes it possible to
optimize the diagnosis of a material's structural health.Note de contenu : - Composite materials
- Experimental setup for the hybrid NDT approach
- Damage assessment : Raw data analysis - Definition and analysis of damage indicators
- FIGURES : 1. Experimental setup for hybrid NDT damage monitoring - 2. Step-wise mechanical loading profile with the corresponding NDT techniques implemented during stress ramps or levels - 3. Thermal maps under the applied tensile stress ramps - 4. Acoustic emission amplitude under the applied tensile stress ramps - 5. Guided waves during the applied tensile stress levels - 6. Definition of the damage indicators associated to the NDT techniques used
- TABLE : Evolution of the damage indicators versus applied stressesPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=27777
in JEC COMPOSITES MAGAZINE > N° 107 (08-09/2016) . - p. 62-65[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 18289 - Périodique Bibliothèque principale Documentaires Disponible
Exemplaires (1)
Code-barres | Cote | Support | Localisation | Section | Disponibilité |
---|---|---|---|---|---|
18289 | - | Périodique | Bibliothèque principale | Documentaires | Disponible |