Accueil
ADHESIVES AGE . Vol. 38, N° 11Crosslink potential. Liquid reactive polymers for UV cure PSAs / Hot melt adhesives in product assembly / Overcoming obstacles to waterborneMention de date : 11/1995 Paru le : 01/11/1995 |
Dépouillements
Ajouter le résultat dans votre panierLiquid reactive polymers for radiation curable high performance PSAs / James R. Erickson in ADHESIVES AGE, Vol. 38, N° 11 (11/1995)
[article]
Titre : Liquid reactive polymers for radiation curable high performance PSAs Type de document : texte imprimé Auteurs : James R. Erickson, Auteur ; Esther M. Zimmermann, Auteur ; Jeffrey G. Southwick, Auteur ; Kathleen S. Kiibler, Auteur Année de publication : 1995 Article en page(s) : p. 18-25 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Adhésifs -- Séchage sous rayonnement ultraviolet
Adhésifs sensibles à la pression
Alliages polymères
Diols
Epoxydes
Formulation (Génie chimique)
Polymères ramifiés
Tackifiant (adhésifs)Index. décimale : 668.3 Adhésifs et produits semblables Résumé : A new class of liquid reactive polymers offers the potential to formulate 100% solids UV curable pressure sensitive adhesives with properties that meet those of solvent-borne acrylic adhesives. Note de contenu : - ADHESIVE PREPARATION AND UV CURING
- RESULTS AND DISCUSSION : Cure reactions - Epoxided star polymer/Mono-ol polymer mixtures - Epoxided mono-ol polymer/Mono-ol polymer mixtures - Effect of film thickness - Further aplications/Formulation concepts
- APPENDIX : Adhesive preparation : THF method - Adhesive preparation : melt mixed method - PSA test methodsEn ligne : https://drive.google.com/file/d/1X_T7DVz1nJbfSBKvxYD8clkEXLg2agmK/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=20789
in ADHESIVES AGE > Vol. 38, N° 11 (11/1995) . - p. 18-25[article]Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 001057 - Périodique Bibliothèque principale Documentaires Exclu du prêt Impact of EVA based hot melts on paper recycling / Neil R. Jarvis in ADHESIVES AGE, Vol. 38, N° 11 (11/1995)
[article]
Titre : Impact of EVA based hot melts on paper recycling Type de document : texte imprimé Auteurs : Neil R. Jarvis, Auteur Année de publication : 1995 Article en page(s) : p. 26-28 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Adhésifs thermofusibles
Copolymère éthylène acétate de vinyle
Papier -- RecyclageIndex. décimale : 668.3 Adhésifs et produits semblables Résumé : An adhesive widely used for packaging and bookbinding applications that causes recycling problems is a hot-melt adhesive based on ethylene-vinyl acetate (EVA). Research is under way to develop alternatives that are more easily removed during the recycling process. These include one-component polyurethane reactive hot melts (PURHM) and nonreactive, high-cohesive strength thermoplastic hot melts. Note de contenu : - Recoverable hot melts En ligne : https://drive.google.com/file/d/1A7SPEOC_ihXXwdUd-cSoofhZ7h2-qmwr/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=20790
in ADHESIVES AGE > Vol. 38, N° 11 (11/1995) . - p. 26-28[article]Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 001057 - Périodique Bibliothèque principale Documentaires Exclu du prêt Hot melt adhesives in product assembly / Peter G. Frankling in ADHESIVES AGE, Vol. 38, N° 11 (11/1995)
[article]
Titre : Hot melt adhesives in product assembly Type de document : texte imprimé Auteurs : Peter G. Frankling, Auteur Année de publication : 1995 Article en page(s) : p. 30-33 Langues : Américain (ame) Catégories : Adhésifs -- Applications industrielles
Adhésifs thermofusiblesIndex. décimale : 668.3 Adhésifs et produits semblables Résumé : Hot melts have successfully replaced solvent-based adhesives, double sided tape or mechanical fastenings to produce better products at lower cost. Note de contenu : - ADVANTAGES OF HMAs : High production speeds - Contain no solvents - Indefinite storage life - Ease of stop-start operations - Gap filing - Physical integrity of components retained
- APPLICATION TECHNIQUES
- CASE HISTORIES : Automotive - Drainage systems - Refrigeration - Caravans - GasketsEn ligne : https://drive.google.com/file/d/1LGjuHGB7y2j-7-qd_6U8j-amgPkJ_K0v/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=20791
in ADHESIVES AGE > Vol. 38, N° 11 (11/1995) . - p. 30-33[article]Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 001057 - Périodique Bibliothèque principale Documentaires Exclu du prêt Retrofitting from solvent based to waterborne PSAs / Beth McMinn in ADHESIVES AGE, Vol. 38, N° 11 (11/1995)
[article]
Titre : Retrofitting from solvent based to waterborne PSAs Type de document : texte imprimé Auteurs : Beth McMinn, Auteur ; W. Scott Snow, Auteur ; Dan T. Bowman, Auteur Année de publication : 1995 Article en page(s) : p. 34-41 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Adhésifs en phase aqueuse
Adhésifs sensibles à la pression
PolyacryliquesTags : 'Adhésifs en phase aqueuse' Psas Polyacryliques Equipement Stockage Pompage Transfert Applications Etuves 'Problèmes de fabrication' Chimie Commercialisation Coûts Investissement ls'Fin du produit' Index. décimale : 668.3 Adhésifs et produits semblables Résumé : Waterbased pressure sensitive adhesives differ from solvent-based PSAs in many respects. Differences in manufacturing equipment, end-product markets, production styles (batch processing versus dedicated lines), and chemistry must be considered when deciding whether to convert solvent-based products and processes to the use of waterbased adhesives. Although waterbased PSAs may be formulated for nearly any adhesive category (i.e., natural rubber, styrene-butadiene copolymers, butyl rubber, acrylic, etc.), most advances in waterbased PSA technology have occurred in the acrylic category. For this reason, most of the discussion in this article is primarily applicable to comparisons between waterbased acrylic and solvent-based PSAs.
The acceptance of early waterbased acrylics was slowed by problems associated with their adaptability to conventional coating equipment including poor mechanical stability, streaking or channeling of coating, poor wetout on release liner, and high levels of foaming. More recently, advances have been made to ease the transition from solvent-based to waterbased acrylic PSAs.
The purpose of this article is to provide an understanding of the technological considerations associated with the retrofit of solvent-based coating equipment to produce waterbased adhesive-coated products.Note de contenu : - Equipment issues : Storage, transfer and pumping equipment - Application equipment - Drying ovens - Other manufacturing issues
- Chemistry issues
- Marketing and operational concerns : Cost issues - Capital costs - Annual costs
- End product market issues
- End product cost
- Capacity loadingEn ligne : https://drive.google.com/file/d/172-l1IMI6OgZFHs1naUdrCtzBvuHsvou/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=20796
in ADHESIVES AGE > Vol. 38, N° 11 (11/1995) . - p. 34-41[article]Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 001057 - Périodique Bibliothèque principale Documentaires Exclu du prêt
Exemplaires (1)
Code-barres | Cote | Support | Localisation | Section | Disponibilité |
---|---|---|---|---|---|
001057 | - | Périodique | Bibliothèque principale | Documentaires | Exclu du prêt |