Adjustable dispersion rings reduce setup times / Marcus Greger in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 2 (02/2012)

[article]  inKUNSTSTOFFE INTERNATIONAL > Vol. 102, N° 2 (02/2012) . - p. 16-18 Titre : Adjustable dispersion rings reduce setup times Type de document : texte imprimé Auteurs : Marcus Greger, Auteur ; Roger Weinlein, Auteur ; Manfred H. Wagner, Auteur Année de publication : 2012 Article en page(s) : p. 16-18 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Compoundage Extrudeuse à rouleau planétaire Matières plastiques -- Extrusion -- Appareils et matériels Index. décimale : 668.4 Plastiques, vinyles Résumé : When compounding polymers and additives on two or multi-stage planetary roller extruders in the laboratory changeovers between different materials are a common task. A newly developed adjustable dispersion ring system significantly reduces setup times. Note de contenu : - Variations with a perforated disc system - Determination of the degree of mixing - Economic considerations Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=15611 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
13727	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Compounding of powder coatings / Tad Sasiedzki in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 205, N° 4605 (02/2015)  

[article]  inPOLYMERS PAINT COLOUR JOURNAL - PPCJ > Vol. 205, N° 4605 (02/2015) . - p. 35-38 Titre : Compounding of powder coatings Type de document : texte imprimé Auteurs : Tad Sasiedzki, Auteur Année de publication : 2015 Article en page(s) : p. 35-38 Langues : Anglais (eng) Catégories : Compoundage Extrudeuse à rouleau planétaire Revêtements poudre:Peinture poudre Index. décimale : 667.9 Revêtements et enduits Résumé : The development and advantages of the planetary roller extruder. The diverse advantages of the planetary roller extruder/mixer at a glance : - Repeated thin-layer rolling-out - Through this most precise temperature control of all existing compounding system - Gentle material compounding - Good range of processing of most different materials - Quick change of material without problems - Best self-cleaning effect, due to this smallest waste quantities - Modular construction (max 8 modules) - Ecological production nearly free of risks Note de contenu : - Construction of a planetary roller extruder (roller mixer) - Construction of the processing part En ligne : https://drive.google.com/file/d/1kimiC8LoUDdQ1RsswzH6KXg66EMIwrW4/view?usp=drive [...] Format de la ressource électronique : Pdf Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=23248 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
16967	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Different viscosities combined in a material-friendly way / Marc Waffenschmidt in KUNSTSTOFFE INTERNATIONAL, Vol. 110, N° 9 (2020)  

[article]  inKUNSTSTOFFE INTERNATIONAL > Vol. 110, N° 9 (2020) . - p. 38-39 Titre : Different viscosities combined in a material-friendly way : Higher product quality at lower costs in a continuous process Type de document : texte imprimé Auteurs : Marc Waffenschmidt, Auteur ; Holger Lange, Auteur Année de publication : 2020 Article en page(s) : p. 38-39 Langues : Anglais (eng) Catégories : Bitume Caoutchouc Compoundage Extrudeuse à rouleau planétaire Matières plastiques -- Extrusion Mélanges (chimie) Index. décimale : 668.4 Plastiques, vinyles Résumé : The challenge of compounding a rubber-bitumen mixture was to bring the raw materials together in a way that was gentle on the material despite their very different viscosities. The material is to be melted, mixed, -dispersed, homogenized, degassed and discharged under controlled temperature conditions in a consistently high quality and viscosity. With the planetary roller extruder, Entex has transferred the manufacturing process from a batch process to a continuous process. Note de contenu : - Continuous preparation instead of batch process - Controlled temperature conditions for consistent quality - Fig. 1 : Roller barrel module of the planetary roller extruder: whereas twin-screw extruders have only one kneading gap over the entire length of the processing section, planetary roller extruders have two kneading gaps per planetary spindle, in which the compound is mixed, frictionally mixed and rolled - Fig. 2 : Plant design for continuous preparation of the mixture. Bitumen is supplied at two points to achieve mastification (breaking up the molecular chains) - Fig. 3 : Section through differently prepared rubber-bitumen products : on the left, the mixture produced on the basis of rubber powder from a conventional compounder, on the right the mixture produced on the basis of rubber granulate in the planetary roller extruder - Fig. 4 : Rubber-bitumen compound prepared with the planetary roller extruder En ligne : https://drive.google.com/file/d/1LTuNoScoXBqb2O3A_TuCSQF0Db8KKbkT/view?usp=drive [...] Format de la ressource électronique : Pdf Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=34827 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
22367	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Direct route to the PVC profile / Serhiy Yatsenko in KUNSTSTOFFE INTERNATIONAL, Vol. 111, N° 5 (2021)  

[article]  inKUNSTSTOFFE INTERNATIONAL > Vol. 111, N° 5 (2021) . - p. 41-45 Titre : Direct route to the PVC profile : Extrusion of rigid PVC without dry blend production Type de document : texte imprimé Auteurs : Serhiy Yatsenko, Auteur ; Johannes Rudloff, Auteur ; Marc Waffenschmidt, Auteur ; Marieluise Lang, Auteur ; Thomas Hochrein, Auteur ; Martin Bastian, Auteur Année de publication : 2021 Article en page(s) : p. 41-45 Langues : Anglais (eng) Catégories : Chlorure de polyvinyle Extrudeuse à rouleau planétaire Matières plastiques -- Extrusion Profilés Index. décimale : 668.4 Plastiques, vinyles Résumé : Before the direct extrusion of profiles made of polyvinyl chloride was developed, it was previously necessary to produce a dry blend. This process is expensive and energy-intensive and, in contrast to direct extrusion, discontinuous. The direct extrusion of PVC using planetary roller extruders promises an improvement. In addition to soft PVC, rigid PVC can also be processed in this way with a few adjustments. Note de contenu : - Potential savings due to planetary roller extruders - Challenges in setting up the direct extrusion line - PVC granulates as alternatives to dry blends - Which pressure build-up unit is suitable ? - Successful tests of the prototype line - Figure : The direct extrusion of PVC profiles on planetary roller extruders can save costs and energy and simplify the process - Fig. 1 : Schematic view of a process module of the PRE: several planetary spindles rotate around the temperature-controlled central spindle in a temperature-controlled cylinder assembly - Fig. 2 : With current PRE types, several process modules are connected in series. Moreover, additional systems for process improvement can be integrated - Fig. 3 : The two-module PRE has already proven itself for soft PVC. A few adjustments were necessary for processing rigid PVC - Fig. 4 : Schematic view of the direct extrusion line for rigid PVC: a connected pressure build-up unit provides the pressure required for extrusion - Fig. 5 : Results of the gel permeation-chromatographic test with the two-module PRE set-up: the mean molar mass of the three samples is largely identical - Fig. 6 : The sample PRE has a slightly lower tensile strength than the samples processed in the other two processes - Fig. 7 : In the tests of the Charpy impact strength, the sample processed in the PRE fell significantly below the other two. However, if three modules are used instead of two, it even achieves better values - Fig. 8 : With the installed line, a direct extrusion of rigid PVC using planetary roller extruders is possible En ligne : https://drive.google.com/file/d/1YXaha4wtLy2FjyADD6qR6THm6_yZWiEt/view?usp=drive [...] Format de la ressource électronique : Pdf Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=36169 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
22860	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Modeling planetary roller extruders / Johannes Rudloff in KUNSTSTOFFE INTERNATIONAL, Vol. 101, N° 6 (06/2011)  

[article]  inKUNSTSTOFFE INTERNATIONAL > Vol. 101, N° 6 (06/2011) Titre : Modeling planetary roller extruders Type de document : texte imprimé Auteurs : Johannes Rudloff, Auteur Année de publication : 2011 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Extrudeuse à rouleau planétaire Index. décimale : 668.4 Plastiques, vinyles Résumé : Compounding - Modeling approaches for describing extruder behavior during processing have been discussed in the literature for several years and utilized for machine design. Now modeling approaches have been developed for planetary roller extruders which describes conveying characteristic, temperature, power consumption and dwell time distribution. Note de contenu : - Description of geometry - Description of conveying characteristic - Comparison with experimental data En ligne : https://drive.google.com/file/d/10yiz6_-Fe2RW08SR0XYegDnfV7uPEvOC/view?usp=drive [...] Format de la ressource électronique : Pdf Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=14824 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
013123	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Numerical simulation of fluid flow and mixing dynamics inside planetary roller extruders / J. Winck in INTERNATIONAL POLYMER PROCESSING, Vol. 36, N° 5 (2021)  

Permalink

---

1 (1 - 6 / 6)