![Ajouter à votre panier](https://e-campus.itech.fr/pmb/opac_css/images/basket_small_20x20.png)
[article]
Titre : |
Effect of clay on thermal, mechanical and gas barrier properties of biodegradable polylactic acid/ polybutylene succinate (PLA/PBS) nanocomposites |
Type de document : |
texte imprimé |
Auteurs : |
A. Bathia, Auteur ; Rahul K. Gupta, Auteur ; S. N. Bhattacharya, Auteur ; H. J. Choi, Auteur |
Année de publication : |
2010 |
Article en page(s) : |
p. 5-14 |
Note générale : |
Bibliogr. |
Langues : |
Anglais (eng) |
Index. décimale : |
668.9 Polymères |
Résumé : |
A series of poly(lactic acid) (PLA)/poly(butylene succinate) (PBS)/layered silicate nancomposites were prepared by simple melt extrusion of PLA/PBS/Cloisite 30BX (organically modified MMT) clay. Extruded and compression moulded samples containing 1, 3, 5, 7 and 10 wt.% of clay having 80 and 20 wt.% of PLA and PBS respectively, were prepared to investigate morphological, thermal, mechanical and gas barrier properties of these biodegradable nanocomposites. Wide angle X-ray diffraction (WAXD) was used to assess the periodic distance of the clay layers. WAXD indicated an exfoliated structure for nanocomposites containing 1 and 3 wt.% of C30BX, while, dominantly intercalated structures were noticed for nanocomposites having 5, 7 and 10 wt.% of C30BX. Transmission Electron Microscopy (TEM) images confirmed mixed morphology of intercalated and exfoliated structure even for nanocomposites having 1 and 3 wt.% of C30BX, while some clusters or agglomerated tactoids were detected for higher clay containing (>3 wt.%) nanocomposites. Thermo gravimetric analysis (TGA) revealed the thermal stabilities of polymer blend and their nancomposites. Nanocomposite with 3 wt.% C30BX clay showed enhanced thermal stability compared to other nanocomposites. The effect on the crystallinity, investigated by Modulated Differential Scanning Calorimetry (MDSC) showed slight improvement for nanocomposites having 1, 3, 7 and 10 wt.% of C30BX studied. However, nanocomposites having 5 wt.% of clay content showed higher crystallinity compared to the rest of the nanocomposites. Mechanical properties (tensile strength, % elongation at break and Young's modulus) were measured by Instron Universal Testing Machine. Tensile strength and Young's modulus initially increased for nanocomposites of up to 3 wt.% of clay but then decreased with the introduction of more clay. Oxygen permeabilities of the nanocomposites were also measured. Barrier properties were improved by approximately 26% with the increase of clay content in these nanocomposites. |
DOI : |
10.3139/217.2214 |
En ligne : |
https://drive.google.com/file/d/1S1aB3S1540iSoCYBmFFGhKAhlep7UbL8/view?usp=drive [...] |
Format de la ressource électronique : |
Pdf |
Permalink : |
https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=8577 |
in INTERNATIONAL POLYMER PROCESSING > Vol. XXV, N° 1 (03/2010) . - p. 5-14
[article]
|