Accueil
Détail de l'auteur
Auteur Behzat Oral Bitlisli |
Documents disponibles écrits par cet auteur
Ajouter le résultat dans votre panier Affiner la recherche
Evaluation of collagen hydrolysate on the performance properties of different wet-white tanned leathers / Yusuf Dilek in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 103, N° 3 (05-06/2019)
[article]
Titre : Evaluation of collagen hydrolysate on the performance properties of different wet-white tanned leathers Type de document : texte imprimé Auteurs : Yusuf Dilek, Auteur ; Bahri Basaran, Auteur ; Aykut Sancakli, Auteur ; Behzat Oral Bitlisli, Auteur ; Ali Yorgancioglu, Auteur Année de publication : 2019 Article en page(s) : p. 129-134 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Aldéhydes Un aldéhyde est un composé organique, faisant partie de la famille des composés carbonylés, dont l'un des atomes de carbone primaire (relié au plus à 1 atome de carbone) de la chaîne carbonée porte un groupement carbonyle.
L'aldéhyde le plus simple est le formaldéhyde (ou méthanal), aussi appelé formol lorsqu'il est en solution aqueuse.
Un aldéhyde dérive formellement d'un alcool primaire (oxydation) dont le groupement hydroxyde -OH est en bout de chaîne et se forme suite à l'enlèvement de deux atomes H d'où le nom "alcool déshydrogéné" ou aldéhyde.
AluminiumL'aluminium est un élément chimique, de symbole Al et de numéro atomique 13. C’est un métal pauvre, malléable, de couleur argent, qui est remarquable pour sa résistance à l’oxydation13 et sa faible densité. C'est le métal le plus abondant de l'écorce terrestre et le troisième élément le plus abondant après l'oxygène et le silicium ; il représente en moyenne 8 % de la masse des matériaux de la surface solide de notre planète. L'aluminium est trop réactif pour exister à l'état natif dans le milieu naturel : on le trouve au contraire sous forme combinée dans plus de 270 minéraux différents, son minerai principal étant la bauxite, où il est présent sous forme d’oxyde hydraté dont on extrait l’alumine. Il peut aussi être extrait de la néphéline, de la leucite, de la sillimanite, de l'andalousite et de la muscovite.
L'aluminium métallique est très oxydable, mais est immédiatement passivé par une fine couche d'alumine Al2O3 imperméable de quelques micromètres d'épaisseur qui protège la masse métallique de la corrosion. On parle de protection cinétique, par opposition à une protection thermodynamique, car l’aluminium reste en tout état de cause très sensible à l'oxydation. Cette résistance à la corrosion et sa remarquable légèreté en ont fait un matériau très utilisé industriellement.
L'aluminium est un produit industriel important, sous forme pure ou alliée, notamment dans l'aéronautique, les transports et la construction. Sa nature réactive en fait également un catalyseur et un additif dans l'industrie chimique ; il est ainsi utilisé pour accroître la puissance explosive du nitrate d'ammonium.
Cuirs et peaux -- Propriétés physiques
Hydrolysats de protéines
PhosphoniumLe cation phosphonium (plus rarement phosphinium) est un cation polyatomique de formule PH4+, mais le terme désigne également ses dérivés substitués PR4+2.
Les sels du composé parent sont peu courants, mais cet ion est un intermédiaire dans la préparation industrielle du chlorure de tétrakis(hydroxyméthyl)phosphonium, un composé important : PH3 + HCl + 4 H2C=O → P(CH2OH)4+Cl-.
Les sels de phosphonium organiques sont des réactifs communs en laboratoire. Ceux avec une liaison P-H sont produits par protonation des phosphines : PR3 + H+ → HPR3+.
Beaucoup de cations de phosphonium organiques quaternaires (P+R4) sont produits par alkylation des organophosphines. Par exemple, la réaction entre la triphénylphosphine et l'iodométhane donne l'iodure de méthyltriphénylphosphonium, un précurseur d'ylure de phosphore : PPh3 + CH3I → CH3PPh3+I-.
Le cation tétraphénylphosphonium (PPh4+) est un agent de précipitation utile, analogue aux sels d'ammonium quaternaire utilisés comme catalyseurs de transfert de phase.
Tannage combinéLe tannage combiné se dit des tannages qui allient deux familles ou genre de tannage pour obtenir un résultat additionnant les qualités complémentaires des tannins mis en œuvre par exemple Chrome-Végétal ou Chrome-Synthétique
Wet-white (tannage)
ZirconiumIndex. décimale : 675.2 Préparation du cuir naturel. Tannage Résumé : Tanning with basic chromium sulphate is the most commercially favoured process in the manufacture of a variety of high quality leathers. Environmental restrictions to the disposal of chromium containing solids and effluents, as well as speculations concerning the presence of toxic and carcinogenic chromium(VI) traces in leather products, have already directed the industry towards using alternatives. Wet-white tannages which consist of zirconium (IV) and aluminium (III) salts with high durability and resistance and organic alternatives which use phosphonium, aldehydes and some syntans both types with more eco friendly and biodegradable characteristics seem to be the main options for industry. However, properties like high hydrothermal stability, tensile strength, and thickness cannot be achieved by any alternative single tanning method. In this study, collagen hydrolysates derived from gelatin manufacture were used to improve wet-white leather performance properties through combination with tanning agents comprising zirconium and aluminium salts, phosphonium salts and aldehydes. The result shows that the apparent density, shrinkage temperature, denaturation temperature and strength properties of differently tanned leathers increased with the addition of collagen hydrolysates. SEM analyses show that collagen fibres are dispersed after tanning. Besides, collagen hydrolysates make the fibres loosen and the fullness of leather is increased. Note de contenu : - EXPERIMENTAL PROCEDURES : Materials - Determination of self-tanning action of collagen hydrolysates - Tanning performance of collagen hydrolysates with wet-white tannages - Analyses
- RESULTS AND DISCUSSION : Determination of self-tanning action - Microscopic observations - Determining the physical properties of wet-white tanned leathers
- Table 1 : Properties of collagen hydrolysates
- Table 2 : Aluminium tanning
- Table 3 : Phosphonium tanning
- Table 4 : Zirconium tanning
- Table 5 : Aldehyde tanning
- Table 6 : Properties of leather tanned with collagen hydrolysates
- Table 7 : Physical properties of wet-white tanned leathers
- Fig. 1 : SEM images of hydrolysate self-tanned leatherPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=32669
in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC) > Vol. 103, N° 3 (05-06/2019) . - p. 129-134[article]Réservation
Réserver ce documentHeavy metal contents of various finished leathers / Bahri Basaran in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 90, N° 6 (11-12/2006)
[article]
Titre : Heavy metal contents of various finished leathers Type de document : texte imprimé Auteurs : Bahri Basaran, Auteur ; M. Iscan, Auteur ; Behzat Oral Bitlisli, Auteur ; Ahmet Aslan, Auteur Année de publication : 2006 Article en page(s) : p. 229-234 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Cuir -- Teneur en métaux lourds Index. décimale : 675 Technologie du cuir et de la fourrure Résumé : In this study, an investigation was made into the heavy metal content of leather articles. The metals concerned were cobalt, chromium, copper, zinc, lead and nickel as these metals may be subject to restrictions in some products because of their toxic characteristics. Insole leathers, upper leathers and garment leathers were studied as likely contaminating sources because of their extensive contact with the human body.
Total amounts of heavy metals were initially measured by digestion. In addition, the possible amounts of heavy metals which would easily be extracted in use were extracted in aqueous and artificial perspiration solutions and analyzed using ICP-AES.
It was concluded that the heavy metal content of finished leathers depended mainly on the chemicals used in production, and in particular high chromium contents in leather goods were determined. Also, small amounts of cadmium, zinc, lead, cobalt and copper were detected due to chemical and physical reactions during dyeing and finishing processes. The results of heavy metal contents were compared with limit values for leather and textile articles.Note de contenu : - Table 1 : Conditions of ICP-AES analysis
- Table 2 : Analytical conditions used in studies with ICP-AES
- Table 3 : Wavelengths in ICP-AES analysis
- Table 4 : Heavy metal contents of garment leathers
- Table 5 : Heavy metal contents of insole leathers
- Table 6 : Heavy metal contents of upper leathersEn ligne : https://drive.google.com/file/d/1zwQRy4wLVW-9TTsfnQ-2atUGGE8jzKBz/view?usp=share [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=39046
in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC) > Vol. 90, N° 6 (11-12/2006) . - p. 229-234[article]Importance of using genuine leather in shoe production in terms of foot comfort / Behzat Oral Bitlisli in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 89, N° 3 (05-06/2005)
[article]
Titre : Importance of using genuine leather in shoe production in terms of foot comfort Type de document : texte imprimé Auteurs : Behzat Oral Bitlisli, Auteur ; Huseyin Ata Karavana, Auteur ; Bahri Basaran, Auteur ; A. Aslan, Auteur Année de publication : 2005 Article en page(s) : p. 107-110 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Chaussures
Chaussures -- Matériaux
Confort
Essais (technologie)
Humidité -- Absorption
Perméabilité
Transpiration
Vapeur d'eauIndex. décimale : 675 Technologie du cuir et de la fourrure Résumé : In this study, 1200 pairs of work shoes were examined that had caused complaints by users due to dampness resulting from perspiration in the shoes. It was determined that the upper leather was box calf, the lining was a polyether urethane-based synthetic textile product having a non-woven structure and the insole was a polymeric material of an ethylene- propylene diene rubber (EPDM)-based foam structure. It was also found that the water vapour permeability and water absorption properties of the synthetic insole used in the manufacturing of the work shoes were quite low. It was concluded that this prevented absorption of wetness formed inside the shoe and transfer of the damp to the air outside, and negatively affected foot comfort, causing user complaints. Note de contenu : - MATERIALS : Investigation
- RESULTS AND DISCUSSION : Materials used in the manufacture of the shoes - Water vapour permeability - Water absorption
- Table 1 : Typical IR absorption bands of lining
- Table 2 : Typical IR absorption bands of insole
- Table 3 : Results of water vapour permeability (WVP) tests of shoe materials
- Table 4 : Results of static absorption of water (SAW) tests of shoe materialsPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=39269
in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC) > Vol. 89, N° 3 (05-06/2005) . - p. 107-110[article]Improving the fastness properties of thermochromic leathers : the effects of UV absorbent and cross-linkers / Arife Candas Adigüzel Zengin in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 101, N° 5 (09-10/2017)
[article]
Titre : Improving the fastness properties of thermochromic leathers : the effects of UV absorbent and cross-linkers Type de document : texte imprimé Auteurs : Arife Candas Adigüzel Zengin, Auteur ; Eylul Kucukakin, Auteur ; Behzat Oral Bitlisli, Auteur Année de publication : 2017 Article en page(s) : p. 242-249 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Absorbants et adsorbants
Absorbeurs de rayonnement ultraviolet
Additifs
Colorimétrie
Photostabilité
Pigments à effets spéciaux
Résistance à l'abrasion
Réticulants
ThermochromieIndex. décimale : 675 Technologie du cuir et de la fourrure Résumé : The emerging new applications of thermochromic pigments in leather industry could give a promising opportunity to create innovative designs of smart thermochromie leathers and these leathers are well known with their colour changing effect depending on thermal activation temperature of the thermochromic pigments. A long product his also needed for thermochromic leathers due to the demand for additive use which will enhance the fastness properties of the microencapsulated thermochromic pigments. This study aimed at increasing the light and rubbing fastness values of the leathers that change colour with temperature. Touch (magenta ; 31°C) and cold (blue; 15°C) activated two thermochromic pigments were used in order to provide the colour change of the finished leathers, UV absorbent and Cross-linking chemical additives were used along. with thermochromic pigments in the finishing procedure to increase the fastness properties of the leathers. Colour change features, rubbing and light fastness properties of thermochromic leathers were analyged by a spectrophotometric method in addition to ISO standards of related fastness properties. The use of a UV absorbent in the finishing procedure lead to an increase in the light fastness values of touch and. cold activated therrnochromic leathers. Likewise it was revealed that the use of cross-linker in the top coat of finishing process.improved the rubbing fastness properties of thermochromic leathers. Note de contenu : - Colour measurements of thermochromic leathers
- Fastness properties of thermochromic leathersEn ligne : https://drive.google.com/file/d/1ZrhUEu363ZeuXd_JhEoD124dYFZdDsOG/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=29239
in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC) > Vol. 101, N° 5 (09-10/2017) . - p. 242-249[article]Réservation
Réserver ce documentPhysical and antimicrobial characteristics of Aloe Vera treated split suede leather / Behzat Oral Bitlisli in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CV, N° 2 (02/2010)
[article]
Titre : Physical and antimicrobial characteristics of Aloe Vera treated split suede leather Type de document : texte imprimé Auteurs : Behzat Oral Bitlisli, Auteur ; I. Yasa, Auteur ; Ahmet Aslan, Auteur ; B. H. Cadirci, Auteur ; Bahri Basaran, Auteur Année de publication : 2010 Article en page(s) : p. 34-40 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Aloe vera et constituants
Antimicrobiens
Cuirs et peaux -- DéfautsIndex. décimale : 675 Technologie du cuir et de la fourrure Résumé : This study examined some characteristics of split suede leathers that were treated with a range of Aloe vera concentrations. Following the tanning process of split suede leathers, Aloe vera was applied at five different concentrations (2%, 4%, 6%, 8% and 10%). Leathers treated with Aloe vera took on a yellowish-brown color. Also, the moisture content and softness of the leathers increased according to the concentration of Aloe vera used, and the highest levels of both moisture content and softness were obtained at 8% and 10% application concentrations. The leathers that were treated with 6% or more Aloe vera had slightly higher tear load values when compared with control leathers. In addition, ethanol-based and water-based extracts of Aloe vera showed antimicrobial properties against some Gram (-) and Gram (+) bacteria and C. albicans. En ligne : https://drive.google.com/file/d/1A3fMyV6DVufBDJU8hbuj0PEaBWB7Lxq5/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=8156
in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA) > Vol. CV, N° 2 (02/2010) . - p. 34-40[article]Réservation
Réserver ce documentQuantitative determination of enzymatic and chemical dehairing of skins by an electronic force sensor / Arife Candas Adigüzel Zengin in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CVI, N° 12 (12/2011)
PermalinkTemperature sensitive colour changing leathers with thermochromic pigments / Aybeniz Salom in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 100, N° 6 (11-12/2016)
PermalinkThe effect of conservation defects on the Suede quality of double-face / Behzat Oral Bitlisli in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. XCIX, N° 12 (12/2004)
Permalink