Accueil
Détail de l'indexation
675.2 : Préparation du cuir naturel. Tannage |
Ouvrages de la bibliothèque en indexation 675.2
Ajouter le résultat dans votre panier Affiner la recherche
Anaerobic digestion of tannery sludge : lowering salinity to reduce sludge volume / J. P. Barnard in WORLD LEATHER, Vol. 18, N° 7 (11/2005)
[article]
Titre : Anaerobic digestion of tannery sludge : lowering salinity to reduce sludge volume Type de document : texte imprimé Auteurs : J. P. Barnard, Auteur Année de publication : 2005 Article en page(s) : p. 24-28 Langues : Anglais (eng) Catégories : Boues résiduaires
Déchets -- Réduction
Digestion anaérobie
Tannage -- DéchetsIndex. décimale : 675.2 Préparation du cuir naturel. Tannage Résumé : An investigation was performed to minimise the volume of tannery sludges by bio-degradation. To overcome the inhibiting effects caused by inorganic solubles used in leather manufacture, a nove! technique was employed to reduce the salts content of these sludges. The investigation proved a success, and achieved a significant reduction in the volume of the sludge.
In a partnership between UNIDO and Zimbabwe's Bata Shoe Company, the 18-month research programme was conducted under the technical supervision of consultant Johan Barnard, Envirotan Water from South Africa. Bata (Zimbabwe) supported the effort with hardware and day-to-day manpower while UNIDO funded the consultant expertise under the ongoing project "Assistance in Tannery Pollution Control" (US/ZIM/98/069).Note de contenu : - The research concept
- The pilot study
- The tannery and waste water plant
- The pilot anaerobic digester plant
- The start-up phase
- The loading phase
- Control of the digester
- Temperature effects
- Inhibiting chemicals
- Gassing studies
- Findings from the investsigation
- Panel 1 : Anaerobic digester pilot plant
- Panel 2 : pH stabilisation at start-up - Anaerobic digestion of tannery sludge
- Panel 3 : Digester space load rate - Anaerobic digestion of tannery sludge
- Panel 4 : Percentage reduction of washed sludgeEn ligne : https://drive.google.com/file/d/1PgzH9jsWDYAsXhBgVh6Qb6tt8jDb9jNC/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=32494
in WORLD LEATHER > Vol. 18, N° 7 (11/2005) . - p. 24-28[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 006187 - Périodique Bibliothèque principale Documentaires Disponible
Titre : Analyse de quelques tannins végétaux utilisés pour la fabrication des cuirs Type de document : document électronique Auteurs : Pascale Richardin, Auteur ; Christine Capderou, Auteur ; Françoise Flieder, Auteur ; Sylvette Bonnassies, Auteur ; Dominique Raison, Auteur Importance : p. 151-182 Format : 21 cm Note générale : Bibliogr Langues : Français (fre) Catégories : Cuirs et peaux
Tanins -- analyse
Tanins végétaux
TannageIndex. décimale : 675.2 Préparation du cuir naturel. Tannage Résumé : Le tannage est une étape primordiale dans la fabrication du cuir puisqu'il permet la transformation des peaux animales brutes en cuir. Au cours de leur immersion dans un bain tannant, elles acquièrent une résistance à l'hydrolyse et à la putréfaction par combinaison chimique irréversible entre le collagène et la substance tannante. Celle-ci peut être d'origine diverse : organique (graisses, fumées, végétaux, formol, matériaux synthétiques) ou minérale (alun et chrome). Les qualités du cuir dépendent en partie de la nature de la matière tannante ; ainsi le tannage végétal, utilisé depuis des temps très reculés, permet d'obtenir un matériau facile à travailler, particulièrement bien adapté à la reliure. En France, l'écorce de chêne broyée appelée "tan" a été la plus employée ; à cet effet, on en faisait une décoction aqueuse dans laquelle les peaux étaient mises à tremper. Le tannin diffusant tout d'abord dans l'eau, était ensuite absorbé par la peau qui se transformait alors en cuir. Il fallait douze à dix-huit mois pour obtenir un bon tannage.
Actuellement, on a modifié le procédé en utilisant non plus des décoctions mais des extraits tannants. Ils peuvent être liquides (solution concentrée contenant 50 % de matières sèches) ou solides (poudre, 90 à 96 % de matières sèches) (28,40) ; quel que soit leur conditionnement on les emploie en solution. Le temps du tannage se trouve alors considérablement raccourci, puisqu'il ne dépasse pas un mois. Les produits les plus fréquemment utilisés à l'échelle mondiale sont ceux qui proviennent des bois de québracho, de châtaignier et d'écorce de mimosa.
Si les tannins hydrolysables ont fait l'objet de nombreux travaux, les tannins condensés ont été peu étudiés. Nous avons donc cherché à approfondir notre connaissance dans ce domaine, en nous efforçant de les différencier et d'établir la structure de certains d'entre eux. Néanmoins, nous avons étendu nos recherches à l'étude d'un tannin mixte, provenant du bois de châtaignier, utilisé fréquemment pour la fabrication des cuirs contemporains, et à celle d'un tannin hydrolysable, extrait de feuilles de sumac, souvent employé conjointement à un tannin condensé dans les procédés modernes de tannage.Note de contenu : - Définition
- Classification
- Tanins condensés
- Hypothèses émises sur le processus de polymérisation des tannins condensés
- Comportement des tannins condenses dans différents milieux
- Identification des différents tannins : Extraction - Analyse
- Expérimentation
- Analyse des extraits végétaux : Etude des tannins bruts par CPG. - Extraction par l'acétate d'éthyle - Hydrolyse acide
- Analyse de tannins extraits de cuirs
- Tableau 1 : Composition moyenne de quelques matières tannantes végétales
- Tableau 2 : Répartition des végétaux en fonction du type de tannin qu'ils contiennentPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=38600 Documents numériques
Analyse de quelques tannins végétaux utilisés pour la fabrication des cuirsURL
Titre : Analyse des tanins Type de document : texte imprimé Auteurs : Lucien Dutel, Auteur Année de publication : 1983 Importance : 98 p. Présentation : ill. Format : 30 cm Note générale : Bibliogr. Langues : Français (fre) Catégories : Syntans
Tanins -- analyse
Tanins végétauxIndex. décimale : 675.2 Préparation du cuir naturel. Tannage Résumé : On réunit sous le nom de tanins végétaux un ensemble de composés qui présentent parfois des constitutions chimiques différentes, mais possèdent tout un groupe de propriétés communes.
Ils précipitent la gélatine et certaines autres protéines de leurs solutions ; ils donnent avec la peau des combinaisons difficilement hydrolysables ; ils donnent avec les sels ferriques des laques colorées en noir bleuâtre ou en vert foncé. Ils précipitent de leurs solin: tions un grand nombre de sels de métaux lourds. Ils précipitent également les matières colorantes basiques et la plupart des alcaloïdes. Ils sont généralement amorphes, à l'exception de quelques formes cristallines (acide chébulinique par exemple). Ils sont très solubles dans l'eau et lui communiquent une saveur astringente prononcée ; ils sont moins solubles dans l'alcool, l'acétone, l'acétate d'éthyle, l'ether humide. Ils sont insolubles dans le chloroforme, le benzène, l'éther anhydre.
Possédant des groupes OH phénoliques qui représentent 15 à 30 % de leur masse moléculaire, les tanins sont hygroscopiques et donnent avec l'eau des solutions à caractère colloïdal polydispersé.
Du point de vue industriel, les tanins sont utilisés dans de nombreux domaines :
- tannage des peaux
- protection des métaux
- contrôle de viscosité (forages pétroliers)
- préparation de résines, colles etc...
Les tanins utilisés en tannerie peuvent se diviser en deux grandes classes :
les tanins "pyrogalliques" ou hydrolysables, et les tanins "catéchiques" ou condensés. Des tanins appartenant à ces deux classes peuvent exister dans une même matière tannante.Note de contenu : - GENERALITES SUR LES TANINS : Définition - Classification - Influence des groupes phénoliques - Structure des composés des tanins
- LES TANINS HYDROLYSABLES : Les gallotanins - Les ellagitanins
- LES TANINS CONDENSES :
- BILBLIOGRAPHIE SUR LES TANINS
- LES TANINS SYNTHETIQUES
- ANALYSE DES SUBSTANCES TANNANTES : Généralités - Analyse qualitative - Extraction des matières tannantes - Analyse quantitative des matières tannantesPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=33280 Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 21375 675.2 DUT Monographie Bibliothèque principale Documentaires Disponible Documents numériques
Analyse des taninsURL Analyses of nitrogen metabolism functional microbial community in aerobic tanks of hydrolysis acidification and multistage aerobic process for tannery wastewater / Ding Shaolan in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CXIII, N° 12 (12/2018)
[article]
Titre : Analyses of nitrogen metabolism functional microbial community in aerobic tanks of hydrolysis acidification and multistage aerobic process for tannery wastewater Type de document : texte imprimé Auteurs : Ding Shaolan, Auteur ; Tian Qianqian, Auteur ; Cao Kai ; Li Hua ; Yang Jianjun Année de publication : 2018 Article en page(s) : p. 409-417 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Eaux usées -- Analyse
Eaux usées -- Décontamination
Hydrolyse
Microbiologie industrielle
Tannage -- DéchetsIndex. décimale : 675.2 Préparation du cuir naturel. Tannage Résumé : The actual tannery wastewater was treated by hydrolysis acidification and multistage aerobic process (A/O3). The growth status of microorganisms in three aerobic tanks was measured with the Biolog microplate method to reflect the ability of metabolizing nitrogen source. In the three aerobic tanks, the functional differences between different nitrogen source metabolism microbial communities in three aerobic tanks were compared and analyzed. The results of the present study have shown that when the concentrations of ammonium chloride and potassium nitrate were low, the metabolic activity of nitrifying bacteria was higher than that of denitrifying bacteria in aerobic tanks. With the increase of concentration of ammonium chloride and potassium nitrate, the metabolic activity of denitrifying bacteria was gradually increased, and gradually higher than that of the nitrifying bacteria metabolism. When the concentrations of ammonium chloride and potassium nitrate were 100 mg/L and 20 mg/L, and the concentrations of ammonium chloride and potassium nitrate were 150 mg/L and 30 mg/L, O1 has the best denitrification effect. However, when the concentrations of ammonium chloride and potassium nitrate were increased, nitrogen load was increased, the denitrification effects of nitrification and denitrifying microorganisms were fluctuated. And the diversity index analyses by five indexes showed that the metabolic capacity of microorganisms to carbon sources is good. Note de contenu : - MATERIALS AND METHODS : Chemicals - Experimental equipment - BIOLOG experimental method - Data analyses
- RESULTS AND DISCUSSION : Community analyses of nitrogen metabolism microorganisms in O3 - Functional microbial community analyses based on carbon source metabolism in activated sludge - Analyses of carbon metabolism characteristics of microorganisms in O3En ligne : https://drive.google.com/file/d/1hwGiqo4g-BvZYsppBVMikxxE57zXlOF7/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=31401
in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA) > Vol. CXIII, N° 12 (12/2018) . - p. 409-417[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 20453 - Périodique Bibliothèque principale Documentaires Disponible Analysis of Al2O3 in solutions and leathers. Part 1 : Fast complexometric method for determination of Al2O3 in residual solutions from vegetable-aluminum tanning / L. Costadinnova in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 90, N° 5 (09-10/2006)
[article]
Titre : Analysis of Al2O3 in solutions and leathers. Part 1 : Fast complexometric method for determination of Al2O3 in residual solutions from vegetable-aluminum tanning Type de document : texte imprimé Auteurs : L. Costadinnova, Auteur ; T. Kolusheva, Auteur ; D. Vasilev, Auteur ; D. Ivanova, Auteur Année de publication : 2006 Article en page(s) : p. 211-216 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Alumine
Analyse quantitative (chimie)
Complexométrie
Cuirs et peaux
Ethylène diamine tétra acétiqueL'EDTA (Ethylène Diamine Tétra Acétique), ou acide éthylène diamine tétraacétique, est un acide diaminotétracarboxylique de formule C10H16N2O8.
L'EDTA comporte six sites basiques, quatre correspondant aux bases conjuguées (carboxylates) des fonctions carboxyliques et deux correspondant aux fonctions amines. Ces sites basiques sont également des centres ligands, faisant de l'EDTA un ligand hexadentate (ou parfois tétradentate, lorsque seuls les sites carboxyliques sont utilisés). C'est d'ailleurs sa principale caractéristique, son fort pouvoir chélatant (ou complexant) par lequel il forme des complexes métalliques très stables, ce qui en fait un traitement en cas d'intoxication aux métaux lourds comme le plomb, avec une concentration adaptée (Voir Applications et chélation). Dans les complexes, l'EDTA est lié aux cations métalliques sous la forme d'une de ses bases conjuguées9.
Solutions (chimie)
Statistique
Tannage combinéLe tannage combiné se dit des tannages qui allient deux familles ou genre de tannage pour obtenir un résultat additionnant les qualités complémentaires des tannins mis en œuvre par exemple Chrome-Végétal ou Chrome-Synthétique
Tannage minéralTannage dans lequel interviennent différents minéraux. Le plus répandu est le tannage aux sels de chrome, mais aussi à l’aluminium
Tannage végétalIndex. décimale : 675.2 Préparation du cuir naturel. Tannage Résumé : The conditions for a quantitative fulfillment of the reaction between Al3+ and EDTA in the presence of plant tanning extracts have been studied in detail. As a result we have established a fast complexometric method with residual titration for the determination of Al2O3 in complex coloured residual tanning solutions. The absence of systematic errors in the proposed procedure is proved. The repeatability of the method is very good, the standard deviation s = 0.01g/l Al2O3 for concentrations of Al2O3 0.37g/l and 1.92g/l. K+, Na+, and Ca2+ do not interfere with the procedure. Note de contenu : - EXPERIMENTAL PROCEDURE : Reagents - Analytical Procedure
- RESULTS AND DISCUSSION : Theoretical overview of the chemical reactions - Influence of the duration of boiling the solution on the formation of AlY- complexes in the presence of plant tanning extracts - Analytical characteristics of the method
- Table 1 : Values of the conditional stability constants (b’MIY) of the EDTA complexes with metal ions contained in the residual solutions pH = 5, 1g a Y(H+) = 6.6
- Table 2 : Statistical results for the concentrations of Al2O3(C(Al2O3)) in the two residual solutions from plant-aluminium tanningEn ligne : https://drive.google.com/file/d/17aqRZCS6uDxHl6NNGbPDlLDlKJ6sS4qr/view?usp=share [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=39059
in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC) > Vol. 90, N° 5 (09-10/2006) . - p. 211-216[article]Analysis of Al2O3 in solutions and leathers. Part 2 : Complexometric method for determination of Al2O3 in aluminum and plant-aluminum tanned leathers / T. Kolusheva in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 90, N° 6 (11-12/2006)
PermalinkAnalysis of Al2O3 in solutions and leathers. Part 3 : Spectrophotometric method for determination of Al2O3 in vegetable-aluminum tanned leathers / T. Kolusheva in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 91, N° 1 (01-02/2007)
PermalinkAnalysis of gallotannin in sumac. Part 1 : Titrimetric method for determination of gallotanin in sumac extract / L. Costadinnova in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 91, N° 6 (11-12/2007)
PermalinkAnalysis of gallotannin in the tanning substances of sumac. Part 2 : Titrimetric method for the determination of gallotannin in residual / T. Kolusheva in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 92, N° 1 (01-02/2008)
PermalinkAnalysis of release of free formaldehyde originated from THP salt tannages in leather by high performance liquid chromatography : origanum onites essential oil as free formaldehyde scavenger / Eser Eke Bayramoglu in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CVIII, N° 11 (11/2013)
PermalinkAnalysis of vegetable tannin absorption during the tannage of hide/hide power / Mariliz Gutterres in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CII, N° 7 (07/2007)
PermalinkAnimal glue in industry and the use of chrome-tanned hide collagen in the production of animal glue / C. L. Pearson in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. XXVII (Année 1982)
PermalinkAnionic surfactants : determination by flow injection spectrophotometry. Measurement of trace amounts in tannery effluent without liquid-liquid extraction / Yu Lingyun in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 93, N° 5 (09-10/2009)
PermalinkAntibacterial properties of tannins / Antonio Battaglia in INTERNATIONAL LEATHER MAKER (ILM), N° 42 (07-08/2020)
PermalinkAntimicrobial activity of chrome-tanned leathers treated with chitosan formate / B. Ocak in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 99, N° 5 (09-10/2015)
PermalinkAntiradical efficiency of different vegetable tannin extracts / A. Zalacain in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. XCVII, N° 4 (04/2002)
PermalinkAperçu sur la répartition du chrome et son influence sur la qualité du cuir / Raymonde Lasserre in REVUE TECHNIQUE DES INDUSTRIES DU CUIR, Vol. LXI (Année 1969)
PermalinkApplicability of fluorinated surface-active agents in different tanning processes / E. Gratacos in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. LXXXV (Année 1990)
PermalinkApplication of amphoteric polymers in the process of leather post-tanning / Xuechuan Wang in JOURNAL OF LEATHER SCIENCE AND ENGINEERING, Vol. 3 (Année 2021)
PermalinkApplication of carboxyl-functionalized epoxy resin in the leather tanning process / Bin Lyu in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CXIII, N° 7 (07/2018)
PermalinkApplication of Cr(III) hydrolytic oligomers in leather tanning / T. Gotsis in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 76, N° 6 (11-12/1992)
PermalinkApplication of FT-infrared spectroscopy to the study of structural changes of leather during tannery processing / Z. Bajza in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 81, N° 6 (11-12/1997)
PermalinkApplication of infrared spectroscopy (FTIR and NIR) in vegetable tanning process control / Trinitat Canals in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 97, N° 3 (05-06/2013)
PermalinkApplication of Mn-doped mesoporous TiO2 in tannery wastewater treatment / Xiu He in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 103, N° 6 (11-12/2019)
PermalinkApplication of nonionic gemini aliphatic polyurethane surfactant for improving the performance of vegetable tanned leather / Shuangquan Lai in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CXIV, N° 11 (11/2019)
Permalink