| Titre : |
Annual book of ASTM standards - Section 6 : Paints, related coatings, and aromatics - Vol. 06.02 : Paint - Products and applications ; protective coatings ; pipeline coatings |
| Type de document : |
texte imprimé |
| Auteurs : |
American Society for Testing and Materials (Philadelphia, United States), Auteur |
| Editeur : |
Philadelphie [United States] : American Society for Testing and Materials (ASTM) |
| Année de publication : |
2012 |
| Importance : |
XLIX-1223 p. |
| Présentation : |
ill. |
| Format : |
28 cm |
| Note générale : |
Index |
| Langues : |
Américain (ame) |
| Catégories : |
Pipelines -- Revêtements protecteurs
Revêtements (produits chimiques):Peinture (produits chimiques)
Revêtements -- Normes:Peinture -- Normes
Revêtements protecteurs -- Normes
|
| Index. décimale : |
667.9 Revêtements et enduits |
| Note de contenu : |
C722-04 - Specification for chemical-resistant monolithic floor surfacings
D333-01 (2007) - Guide for clear and pigmented lacquers
§D358-98 (2006) - Specification for wood to be used as panels in weathering tests of coatings
D365-01 (2011) - Guide for soluble nitrocellulose base solutions
§D610-08 - Practice for evaluating degree of rusting on painted steel surfaces
§D711-10 - Test method for no-pick-up time of traffic paint
D713-90 (2010) - Practice for conducting road service tests on fluid traffic marking materials
D868-10 - Practice for determination of degree of bleeding of traffic paint
D913-10 - Practice for evaluating degree of traffic paint line wear
§D969 - Test method for laboratory determination of degree of bleeding of traffic paint (withdrawn 2010 - replaced by D 868)
D1155-10 - Test method for roundness of glass spheres
§D1214-10 - Test method for sieve analysis of glass spheres
§D1308-02 (2007) - Test method for effect of household chemicals on clear and pigmented organic finishes
D1309-93 (2010) - Test method for settling properties of traffic paints during storage
D1316-06 (2011) - Test method for fineness of grind of printing inks by the NPIRI grindometer
D1641-04 - Practice for conducting outdoor exposure tests of varnishes
§D1734-93 (2007) - Practice for making cementitious panels for testing coatings
§Dl849-95 (2008) - Test method for package stability of paint
D2064-91 (2008) - Test method for print resistance of architectural paints
D2065-03 (2011) - Test method for determination of edge performance of composite wood products under surfactant accelerated moisture stress
D2066-07 - Test methods for relative tinting strength of paste-type printing ink dispersions
D2067-97 (2008) - Test method for course particles in printing ink dispersions
§D2091-96 (2011) - Test method for print resistance of lacquers
D2199-03 (2007) - Test method for measurement of plasticizer migration from vinyl fabrics to lacquers
§D2200-08 - Practice for use of pictorial surface preparation standards and guides for painting steel surfaces
D2205-85 (2010) - Guide for selection of tests for traffic paints
§D2243-95 (2008) - Test method for freeze-thaw resistance of water-borne coatings
D2338-02 (2007) - Test method for determining particle size of multicolor lacquers
§D2486-06 - Test methods for scrub resistance of wall paints
D2743-68 (2010) - Practices for uniformity of traffic paint vehicle solids by spectroscopy and gas chromatography
D2792-69 (2010) - Test method for solvent and fuel resistance of traffic paint
D2793-9 9(2011) - Test method for block resistance of organic coatings on wood panel substrates
D2921-98 (2011) - Test method for qualitative tests for the presence of water repellents and preservatives in wood products
D2967-07 - Test method for corner coverage of powder coatings
D3002-07 - Guide for evaluation of coatings applied to plastics
D3003-01 (2006) - Test method for pressure mottling and blocking resistance of organic on metal substrates
D3003-01 (2006) - Test method for pressure mottling and blocking resistance of organic coatings on metal substrates
D3023-98 (2011) - Practice for determination of resistance of factory-applied coatings on wood products to stains and reagents
§D3170-03 (2007) - Test method for -chipping resistance of coatings
D3258-04 (2010) - Test method for porosity of white or near white paint films by staining
D3259 - Practice for infrared determination of the temperature of applied coatings on wood products during the curing cycle (withdrawn 2009)
D3260-01 (2011) - Test method for acid and mortar resistance of factory-applied clear coatings on extruded aluminum products
D3276-07 - Guide for painting inspectors (metal substrates)
D3322-82 (2011) - Practice for testing primers and primer surfacers over preformed metal
D3424-11 - Practice for evaluating the relative lightfastness and weatherability of printed matter
§D3450-00 (2010) - Test method for washability properties of interior architectural coatings
D3451-06 - Guide for Testing coating powders and powder coatings
§D3623-78a (2004) - Test method for testing antifouling panels in shallow submergence
D3719 - Test method for quantifying dirt collection on coated exterior panels (withdrawn 2009)
D3730-10 - Guide for testing high-performance interior architectural wall coatings
§D3732-82 (2011) - Practice for reporting cure times of ultraviolet-cured coatings
D3793 06 - Test method for low temperature coalescence of latex paint films by porosity measurement
D3794 - Guide for Testing coil coatings (withdrawn 2009t)
D3843-00 (2008) - Practice for quality assurance for protective coatings applied to nuclear facilities
D3911-08 - Test method for evaluating coatings used in light-water nuclear power plants at simulated design basic accident (DBA) conditions
D3912-10 - Test method for chemical resistance of coatings and linings for use in nuclear power plants
D3928-00a (2010) - Test method for evaluation of gloss or sheen uniformity
D4040-10 - Test method for rheological properties of paste printing and vehicles by the falling-rod viscometer.
D4062-11 - Test method for leveling of paints by draw-down method
D4082-10 - Test method for effects of gamma radiation. On coatings for use in nuclear power plants
D4145-10 - Test method for coating flexibility of prepainted sheet
D4146-10 - Test method for formability of zinc-rich primer/chromate complex coatings on steel
D4147-99 (2007) - Practice for applying coil coatings using the wire-wound drawdown bar
D4213-08 - Test method for scrub resistance of paints by abrasion weight loss
D4217-07 - Test method for gel, time of thermosetting coating powder
D4227-05 - Practice for qualification of coating applicators for application of coatings to concrete surfaces
D4228-05 - Practice for qualification of coating applicators for application of coatings to steel surfaces
D4236-94 (2011) - Practice for labeling art materials for chronic health hazards
D4242-07 - Test method for inclined plate flow for thermosetting coating powders
D4258-05 - Practice for surface cleaning concrete for coating
D4259-88(2006) - Practice for abrading concrete
D4260-05 - Practice for liquid and gelled acid etching of concrete
D4261-05 - Practice for surface cleaning concrete masonry units for coating
D4262-05 - Test method for ph of chemically cleaned or etched concrete surfaces
§D4263- 83 (2005) - Test method for indicating moisture in concrete by the plastic sheet method
D4285-83 (2006) - Test method for indicating oil or water in compressed air
D4286-08 - Practice for determining coating contractor qualifications for nuclear powered electric generation facilities
*D4302-05 (2010) - Specification for artists' oil, resin-oil, and alkyd paints
D4303-10 - Test methods for lightfastness of colorants used in artists' materials
D4361-10 - Test method for apparent tack of printing inks and vehicles by a three-roller tackmeter
§D4400-99 (2007) - Test method for sag resistance of paints using a multinotch applicator
§D4417-11 - Test methods for field measurement of surface profile of blast cleaned steel
*D4446-08 - Test method for anti-swelling effectiveness of water-repellent formulations and differential swelling of untreated wood when exposed to liquid water environments
D4537-04a - Guide for establishing procedures to qualify and certify personnel performing coating work inspection in nuclear facilities
'D4538-05 - Terminology relating to protective coating and lining work for power generation facilities
D4541-09 - Test method for pull-off strength of. Coatings using portable adhesion Testers
D4618-92 (2010) - Specification for design and fabrication of flue gas desulfurization system components for protective lining application
D4619-96 (2004) - Practice for inspection of linings in operating flue gas desulfurization systems
D4707-09 - Test method for measuring paint spatter resistance during roller application
D4712-87a (2005) - Guide for testing industrial water-reducible coatings
D4713-92 (2007) - Test methods for nonvolatile content of heatset and liquid printing ink systems
D4752-10 - Practice for measuring MEK resistance of ethyl silicate (inorganic) zinc-rich primers by vent rob
D4787-08 - Practice for continuity verification of liquid or sheet linings applied to concrete substrates
D4796-10 - Test method for bond strength of thermoplastic traffic marking materials
D4797-88 (2007) - Test methods for chemical and gravimetric analysis of white and yellow thermoplastic traffic marking containing lead chromate and titanium dioxide
D4828-94 (2008) - Test methods for practical washability organic coatings
D4838-88 (2010) - Test method for determining the relative tinting strength of chromatic paints
D4938-89 (2007) - Test method for erosion testing of antifouling paints using high velocity water
D4939-89 (2007) - Test method for subjecting marine antifouling coating to biofouling and fluid shear forces in natural seawater
D4940-10 - Test method for conductimetric analysis of water soluble ionic contamination of blasting abrasives
D4941-06 (2010) - Practice for preparing drawdowns of artists' paste paints
D4942-11 - Test methods for water pickup of lithographic printing inks and vehicles in a laboratory mixer
D4946-89 (2008) - Test method for blocking resistance of architectural paints
D4958-10 - Test method for comparison of the brush: drag of latex paints
D4960-08 - Test method for evaluation of color for thermoplastic trek marking materials
D5007-99 (2008) - Test method for wet-to-dry hiding change
D5009-02 (2011) - Test method for evaluating and comparing transfer efficiency of spray applied coatings under laboratory conditions
D5010-08a - Guide for testing printing inks. and. related. materials
D5043-04 (2009) - Practice for field identification of coatings
D5063-90 (2004) - Guide for use of certification of coating conformance form
D5064-07 - Practice for conducting a patch test to assess coating compatibility
D5065-07 - Guide for assessing the condition of aged coatings on steel surfaces
D5066-91 (2011) - Test method for determination of the transfer efficiency under production conditions for spray application of-automotive paints-weight basis
D5067-05 (2010) - Specification for artists' watercolor paints
D5068-04 (2009) - Practice for preparation of paint brushes for evaluation
D5069-07 - Practice for preparation of paint-roller covers for evaluation of architectural coatings D5095-91 (2007) - Test method for determination of the nonvolatile content in silanes, siloxanes and silane siloxane blends used in masonry water repellent treatments
D5098-05a (2010) - Specification for artists' acrylic dispersion paints
D5107-03 (2007) - Practice for preparatory surface cleaning of architectural sandstone
D5108- 90 (2007) - Test method for organotin release rates of antifouling coating systems in sea water
D5139-10 - Specification for sample preparation for qualification testing of coatings to be used in nuclear power plants
D5144-08 - Guide for use of protective coating standards in nuclear power plants
D5146-10 - Guide to testing solvent-borne architectural coatings
D5150-92 (2009) - Test method for hiding power of architectural paints applied by roller
D5161-04a - Guide for specifying inspection requirements for coating and lining work (metal substrates)
D5162-08 - Practice for discontinuity (holiday) testing of nonconductive protective coating on metallic substrates
D5163 -08 - Guide for establishing a program for condition assessment of coating service level I coating systems in nuclear power plants
D5181-09 - Test method for abrasion resistance of printed mater by the GA-CAT comprehensive abrasion tester
D5286-01 (2011) - Test methods for determination of transfer efficiency under general production conditions for spray application of paints
D5301-92 (2008) - Practice for physical characterization of paint brushes
D5324-10 - Guide for testing water-borne architectural coatings
D5326-94a (2009) - Test method for color development in tinted latex paints
D5327-97 (2007) - Practice for evaluating and comparing transfer efficiency of spray applied coatings under general laboratory conditions
D5367-08 - Practice for evaluating coatings applied over surfaces treated with inhibitors used to prevent flash rusting of steel when water or water/abrasive blasted
D5382-02 (2007) - Guide to evaluation of .optical properties of powder coatings
D5383-02 (2010) - Practice for visual determination of the lightfastness of art materials by art technologists
D5398-97 (2010) - Practice for visual evaluation of the lightfastness of art materials by the user
D5401-03 (2009) - Test method for evaluating clear water repellent coatings on wood
D5402-06 (2011) - Practice for assessing the solvent resistance of organic coatings using solvent rubs
D5403-93 (2007) - Test methods for volatile content of radiation curable materials
D5479 94 (2007) - Practice for testing biofouling resistance of marine coatings partially immersed
D5498-09 - Guide for developing a training program for personnel performing coating work inspection for nuclear facilities
D5499-94 (2007) - Test methods for heat resistance of polymer linings for flue gas desulfurization systems
D5517-07 - Test method for determining, extractability of metals from art materials
D5618-94 (2011) - Test method for measurement of barnacle adhesion strength in shear
D5702-07 - Practice for field sampling of coating films for analysis for heavy metals
D5703-95 (2007) - Practice for preparatory surface cleaning for clay brick masonry
D5723-95 (2010) - Practice for determination of chromium treatment weight on metal substrates by x-ray fluorescence
D5724-06 (2010) - Specification for gouache paints
D5795-95 (2008) - Test method for determination of liquid water absorption of coated hardboard and other composite wood products via "Cobb Ring" apparatus
D5796-10 - Test method for measurement of dry film thickness of thin-film coil-coated systems by destructive means using a boring device
D5860-95 (2007) - Test method for evaluation of the effect of water repellent treatments on freeze-thaw resistance of hydraulic cement mortar specimens
D5861-07 - Guide for significance of particle size measurements of coating powders
D5909-96a (2011) - Test method for drying time of oxidative-drying printing inks by squalene resistance
D5913-96 (2009) - Test method for evaluation of cleanability of paint brushes
D5959-96 (2007) - Test method for bulk density of level paintbrush filaments
D5965-02 (2007) - Test methods for specific gravity of coating powders
D6073- 08a - Test method for relative setting of heatset printing inks
D6137-97 (2004) - Test method for sulfuric acid resistance of polymer linings for flue gas desulfurization systems
D6189-97 (2008) - Practice for evaluating the efficiency of chemical removers for organic coatings
D6206-09 - Practice for sampling of coating films
D6237-09 - Guide for painting inspectors (concrete and masonry substrates)
D6279-03 (2007) - Test method for rub abrasion mar resistance of high gloss coatings
D6337-98 (2007) - Practice for physical characterization of woven paint applicator fabrics
D6386-10 - Practice for preparation of zinc (hot-dip galvanized) coated iron and steel product and hardware surfaces for painting
D6419-00 (2009) - Test method for volatile content of sheet-fed and coldset web offset printing inks
D6441-05 (2010) - Test methods for measuring the hiding power of powder coatings
D6442-06 - Test method for determination of copper release rate from antifouling coatings insubstitute ocean water
D6486-01 (2011) - Practice for short term vehicle service exposure of automotive coatings
D6487-10 - Practice for preparing prints of paste printing inks using a hand operated laboratory flat-bed press.
D6488-08 - Terminology relating to print problems
D6489-99 (2006) - Test method for determining the water absorption of hardened concrete treated with a water repellent coating
D6490-99 (2006) - Test method for water vapor transmission of nonfilm forming treatments used on cementitious panels
D6491-09 - Practice for evaluation of aging resistance of prestressed prepainted metal in a dry heat test
D6492-99 (2011) - Practice for detection of hexavalent chromium on zinc and zinc/aluminum alloy coated steel
D6531-00 (2010) - Test method for relative tinting strength of aqueous ink systems by instrumental measurement
D6532-00 (2006) - Test method for evaluation of the effect of clear water repellent treatments on water absorption of hydraulic cement mortar specimens
D6577-06 (2011) - Guide for testing industrial protective coatings
D6578-08 - Practice for determination of graffiti resistance
D6583-04 (2010) - Test method for porosity of paint film by mineral oil absorption
D6632 - Test method for total copper in antifouling paints (withdrawn 2010)
D6665-09 - Practice for evaluation of aging resistance of pre-stressed prepainted metal in a boiling water test
D6676 - Test method for cathodic disbonding of exterior pipeline coatings at elevated temperatures using interior heating (withdrawn 2010)
D6677-07 - Test method for evaluating adhesion by knife
D6686-01 (2008) - Test method for evaluation of tannin stain resistance of coatings
D6688-11 - Practice for relative resistance of printed matter to liquid chemicals by a sandwich technique
D6736-08 - Test method for burnish resistance of latex paints
D6737-01 (2006) - Test method for bulk density of tapered paintbrush filaments
D6763-08 - Guide for testing exterior wood stains and, clear water repellents
D6801-07 - Test method for measuring maximum spontaneous heating temperature of art and other materials
D6846-02 (2007) - Practice for preparing prints of paste printing inks with a printing gage
D6900-10 - Test method for wet adhesion of latex paints to a gloss alkyd enamel substrate
D6901-06 - Specification for artists' colored pencils
D6903-07 - Test method for determination of organic biocide release rate from antifouling coatings in substitute ocean water
D6904-03 (2007) - Practice for resistance to wind-driven rain for exterior coatings applied on masonry
D6906-l la - Test method for determination of titanium treatment weight on metal substrates by wavelength dispersive x-ray fluorescence
D6943-10 - Practice for immersion testing of industrial protective coatings
D6944-09 - Practice for resistance of cured coatings to thermal cycling
D6957-08 - Practice for measuring curl in paint brush filling material
D6990- 05 (2011) - Practice for evaluating biofouling resistance and physical performance of marine coating systems
D7054-04 (2009) - Specification for cautionary labeling of extension poles for use with paint applicators distributed in North America
D7055-09 - Practice for preparation (by abrasive blast cleaning) of licit-rolled carbon steel panels for testing of coatings
D7072-04 (2009) - Practice for evaluating accelerated efflorescence of latex coatings
D7073-05 - Guide for application and evaluation of brush and rouler applied paint films
D7088-08 - Practice for résistance to hydrostatic pressure for coatings used in below grade applications applied to masonry
D7089-06 - Practice for determination of the effectiveness of anti-graffiti coating for use on concrete, masonry and natural stone surfaces by pressure washing
D7093-04 - Test method for formability of thin film organic coatings on steel over a biaxially stretched dome
D7108-05 - Guide for establishing qualifications for a nuclear coatings specialist
D7127-05 - Test method for measurement of surface roughness of abrasive blast cleaned metal surfaces using a portable stylus instrument
D7163-11 - Test method for specular gloss of printed matter
D7167-05 - Guide for establishing procedures to monitor the performance of safety-related coating service level III lining systems in an operating nuclear power plant
D7188-05 (2010) - Terminology for printing inks, materials, and processes
D7189-05 - Test method for relative mileage of news ink on newsprint
D7190- 10 (2011) - Practice to evaluate leaching of water-soluble materials from latex paint films
D7230-06 - Guide for evaluating polymeric lining systems for water immersion in coating service level III safety-related applications on metal substrates
D7233-08 - Test method for testing fracture of level paintbrush filaments
D7234-05 - Test method for pull-off adhesion strength of coatings on concrete using portable pull-off adhesion testers
D7244-06a (2011)-Test method for relative cure of energy-cured inks and coatings
D7270-07 - Guide for environmental and performance verification of factory-applied liquid coatings
D7305-08a - Test method for reflection density of printed matter
D7306-07 - Practice for testing low temperature film formation of latex paints by visual observation
D7307-06 (2011) - Practice for sampling of thermoplastic traffic marking materials
D7308-07 - Practice for sample preparation of thermoplastic traffic marking materials
D7354-11 - Guide for artists paint waste disposal in private, non-commercial settings
D7355-10 - Guide for artists paint waste disposal in smaller commercial or educational settings
D7376-10a - Practice for outdoor evaluation of wet stack storage conditions on coil-coated metals
D7377-09 - Practice for evaluating the water wash-off resistance of traffic paints using a water faucet
D7378 -10 - Practice for measurement of thickness of applied coating powders to predict cured thickness
D7393-07 - Practice for indicating oil in abrasives
D7396-08 - Guide for preparation of new, continuous zinc-coated (galvanized) steel surfaces for painting
D7488-11 - Test method for open time of latex paints
D7489-09 - Practice for evaluating touch-up properties of architectural coatings under various environmental conditions
D7491-08 - Guide for management of non-conforming coatings in coating service level I areas of nuclear power plants
D7514-09 - Test method for evaluating ink stain blocking of architectural paint systems by visual assessment
D7538-09 - Practice for evaluating the water wash-off resistance of traffic paints using an atomizing spray device
D7539-10 - Practice for using a test chamber for humidity conditioning of test panels of pavement marking paints
D7602-11 - Practice for installation of vulcanized rubber linings
D7639-10 - Test method for determination of zirconium treatment weight or thickness on metal substrates by x-ray fluorescence
D7680-10 - Practice for preparing prints of paste printing inks by a motor-driven printability tester
D7681-11 - Test method for measuring gradation of gloss spheres using a flowing stream digital image
analyzer
D7682 -10 - Test method for replication and measurement of concrete surface profiles using replica putty
G6-07 - Test method for abrasion resistance of-pipeline coatings
G8-96 (2010) - Test methods for cathodic disbonding of pipeline coatings
G9-07 - Test method for water penetration into pipeline coatings
G10-10 - Test method for specific bendability of pipeline coatings
G11-04 - Test method for effects of outdoor weathering on pipeline coatings
G12-07 - Test method for nondestructive measurement of film thickness of pipeline coatings on steel
G14-04 (2010) - Test method for impact resistance of pipeline coatings (falling weight test)
G17-07 - Test method for penetration resistance of pipeline coatings (blunt rod)
G18-07 - Test method for joints, fittings, and patches in coated pipelines
G19 - Test method for disbonding characteristics of pipeline coatings by direct soil burial (with drawn 2010)
G20-10 - Test method for chemical resistance of pipeline coatings
G42-96 (2003) - Test method for cathodic disbonding of pipeline coatings subjected to elevated temperatures
G55-07 - Test method for evaluating pipeline coating patch materials
G62-07 - Test methods for holiday detection in pipeline coatings
G70-07 - Test method for ring bendability of pipeline coatings (squeeze test)
G80-07 - Test method for specific cathodic disbonding of pipeline coatings
G95-07 - Test method for cathodic disbondment test of pipeline coatings (attached cell method) |
| Permalink : |
https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=30612 |
|
Aller sur edunet
Accueil
Annual book of ASTM standards - Section 6 : Paints, related coatings, and aromatics - Vol. 06.02 : Paint - Products and applications ; protective coatings ; pipeline coatings / Philadelphie [United States] : American Society for Testing and Materials (ASTM) (2012)
