Effect of shim configuration on flow dynamics and operability windows in stripe slot coating process / Gui Hua Han in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 11, N° 1 (01/2014)  

[article]  inJOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 11, N° 1 (01/2014) . - p. 19-29 Titre : Effect of shim configuration on flow dynamics and operability windows in stripe slot coating process Type de document : texte imprimé Auteurs : Gui Hua Han, Auteur ; Si Hyung Lee, Auteur ; Won-Gi Ahn, Auteur ; Jaewook Nam, Auteur ; Hyun Wook Jung, Auteur Année de publication : 2014 Article en page(s) : p. 19-29 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Enduction par filière Revêtements Simulation par ordinateur Index. décimale : 667.9 Revêtements et enduits Résumé : The slot coating method is a strong candidate for the manufacture of secondary batteries and electrodes for electronics. For the production of such devices, one may need to coat multiple lanes simultaneously which is usually done by implementing specially designed stripe shim inside the die manifold. The effects of shim configurations on the stripe-patterned coated film were analyzed in this study. We employed computational and experimental analyses to estimate flow patterns and corresponding desirable operating condition changes for uniform, converging and diverging slit channels. It was found that the slit channel shape, which is determined by the shim design, can manipulate the die-exit velocity distribution, capable of controlling edge shape of the crossflow film thickness profile. However, other than producing a uniform channel, this might decrease the scope of operability windows due to the aggravation of bead break-up near the edge of the slit channel. Note de contenu : - SIMULATION AND EXPERIMENT : Three-dimensional computation for stripe coating flows - Experimental observations for coating flows and operability windows - RESULTS AND DISCUSSION : Flow simulation within internal die region - Experiments for operability windows and coating profiles - Computational prediction of coating bead region combined with internal channels DOI : 10.1007/s11998-013-9485-3 En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-013-9485-3.pdf Format de la ressource électronique : Pdf Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=20612 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
16023	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Effect of sloped die lip geometry on the operability window in slot coating flows using viscocapillary and two-dimensional models / Si Hyung Lee in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 11, N° 1 (01/2014)  

[article]  inJOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 11, N° 1 (01/2014) . - p. 47-55 Titre : Effect of sloped die lip geometry on the operability window in slot coating flows using viscocapillary and two-dimensional models Type de document : texte imprimé Auteurs : Si Hyung Lee, Auteur ; See Jo Kim, Auteur ; Jaewook Nam, Auteur ; Hyun Wook Jung, Auteur ; Jae Chun Hyun, Auteur Année de publication : 2014 Article en page(s) : p. 47-55 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Enduction par filière Revêtements Tags : 'Buse  à  lèvres'  'Vortex  en  amont'  aval'  'Fenêtre  inclinée'  'Modèle  de  Navier-Stokes'  Visco-capillaire'  Revêtement Index. décimale : 667.9 Revêtements et enduits Résumé : As an indicator for determining the operability window in slot coating flow, the viscocapillary model considering various configurations of upstream and downstream slot die lips was tested and compared with Navier–Stokes two-dimensional model. Bead pressure and sloped lip angle conditions for uniform coating operation demarcated from leaking and bead break-up defects were quantitatively predicted from the position of upstream meniscus from both models. By comparing the results, it is confirmed that the viscocapillary model for many kinds of sloped die lips could predict the operability window accurately. It is also found that there exists vortex or recirculation regimes inside upstream and downstream coating bead regions, depending on the angles of sloped die lips, even for the stable coating flow. The flow control by die lip structure will be usefully applied to design the strategy for the reliable and optimal coating process, including vortex-free windows. Note de contenu : - GOVERNING EQUATIONS FOR COATING BEAD FLOW : Viscocapillary model considering the sloped die configuration - Calculation of 2-D coating bead flow DOI : 10.1007/s11998-013-9504-4 En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-013-9504-4.pdf Format de la ressource électronique : Pdf Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=20615 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
16023	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Effect of upstream meniscus shape on dynamic wetting and operating limits of Newtonian coating liquids in slot coating bead flows / Won-Gi Ahn in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 15, N° 5 (09/2018)  

[article]  inJOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 15, N° 5 (09/2018) . - p. 1067-1076 Titre : Effect of upstream meniscus shape on dynamic wetting and operating limits of Newtonian coating liquids in slot coating bead flows Type de document : texte imprimé Auteurs : Won-Gi Ahn, Auteur ; Si Hyung Lee, Auteur ; Jaewook Nam ; See Jo Kim ; Kwan-Young Lee ; Hyun Wook Jung Année de publication : 2018 Article en page(s) : p. 1067-1076 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Angle de contact Enduction par filière Fluides newtoniens Mouillage (chimie des surfaces) Revêtements Index. décimale : 667.9 Revêtements et enduits Résumé : The coating bead flow and operability window for Newtonian coating liquids are theoretically and experimentally investigated in the slot coating process, with a focus on the shape of the upstream meniscus and contact angles. From the flow visualization in the coating bead region, the contact angles of the upstream meniscus were measured by changing the flow rate and web speed under uniform operating conditions. It was confirmed that the dynamic contact angle is closely related to the capillary number in this process, based on the Hoffman–Voinov–Tanner model. The viscocapillary and two-dimensional Navier–Stokes models using the experimentally observed contact angles accurately predicted the coating bead dynamics and operability windows for two Newtonian liquids. Note de contenu : - EXPERIMENTAL SETUP : Properties of coating liquids - NUMERICAL SIMULATIONS FOR COATING BEAD FLOWS - RESULTS AND DISCUSSION : Operability windows by models and experiments - Observation of upstream meniscus shape - Comparison of coating bead flows from experiments and 2-D simulations - Effect of contact angles at upstream meniscus on coating bead dynamics - Effect of contact angles at upstream meniscus on operability window DOI : 10.1007/s11998-018-0059-2 En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-018-0059-2.pdf Format de la ressource électronique : Pdf Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=31133 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
20232	-	Périodique	Bibliothèque principale	Documentaires	Disponible

---

1 (1 - 3 / 3)