3D simulation of gas assisted injection molding analysis of primary and secondary gas penetration and comparison with experimental results / A. Polynkin in INTERNATIONAL POLYMER PROCESSING, Vol. XX, N° 2 (06/2005)  

[article]  inINTERNATIONAL POLYMER PROCESSING > Vol. XX, N° 2 (06/2005) . - p. 191-201 Titre : 3D simulation of gas assisted injection molding analysis of primary and secondary gas penetration and comparison with experimental results Type de document : texte imprimé Auteurs : A. Polynkin, Auteur ; J. Sienz, Auteur ; J. F. T. Pittman, Auteur Année de publication : 2005 Article en page(s) : p. 191-201 Note générale : Bibliogr. Langues : Anglais (eng) Index. décimale : 668.9 Polymères Résumé : Techniques for the three dimensional simulation of gas assisted injection molding (GAIM) are presented, including analysis of primary and secondary gas penetration and the use of time and position dependent heat transfer boundary conditions, computed in a segregated 3D analysis of conduction in the tool, through many cycles of moulding. Predictions are compared with results of experimental trials using a mould tool with a glass window that allows video recording of the process. Accurate agreement is obtained for gas penetration distances in primary and secondary penetration and for the forms of the gas channel cross sections, in a part that incorporates typical features of a GAIM application. The success of the simulations relies on careful detailing of the computational model and numerical procedures, including the use of dynamically updated flow and heat transfer boundary conditions, the use of sufficiently high resolution meshes, and efficient, high accuracy iterative solution techniques. DOI : 10.3139/217.1878 En ligne : https://drive.google.com/file/d/1uwhXsKk0lkdytilr4nIqRTQMAXRHvXdf/view?usp=drive [...] Format de la ressource électronique : Pdf Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=3080 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
001970	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Gas assisted injection molding of an industrial - Part : 3D simulation provides virtual molding trials / A. Polynkin in INTERNATIONAL POLYMER PROCESSING, Vol. XXII, N° 2 (05/2007)  

[article]  inINTERNATIONAL POLYMER PROCESSING > Vol. XXII, N° 2 (05/2007) . - p. 173-178 Titre : Gas assisted injection molding of an industrial - Part : 3D simulation provides virtual molding trials Type de document : texte imprimé Auteurs : A. Polynkin, Auteur ; J. Sienz, Auteur ; J. F. T. Pittman, Auteur Année de publication : 2007 Article en page(s) : p. 173-178 Note générale : Bibliogr. Langues : Anglais (eng) Index. décimale : 668.9 Polymères Résumé : Techniques developed for three-dimensional simulation of gas assisted injection molding of thermoplastics are here extended to a complex industrial application, a car door handle, providing uniquely detailed insights into the molding process. Handling of the three stages of the process – plastic filling, and primary and secondary gas penetration – is described in terms of the boundary and initial conditions applied. Predictions for plastic filling patterns are compared successfully with molding results, and provide detailed forewarning of potential problems due to weld surfaces and air-traps. Particular emphasis is placed on accurate modeling of secondary gas penetration, which is also validated against practical results. A further novel feature is the export of an STL model of the gas core, providing a CAD model of the finished molding for subsequent in-service analysis. DOI : 10.3139/217.0996 En ligne : https://drive.google.com/file/d/1QCsBJukQqvheDu_VjpUsBCqh6zI_V-3-/view?usp=drive [...] Format de la ressource électronique : Pdf Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=2757 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
007141	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Modelling of cyclic 3-dimensional heat transfer in injection moulding / A. Polynkin in INTERNATIONAL POLYMER PROCESSING, Vol. XIX, N° 4 (12/2004)  

[article]  inINTERNATIONAL POLYMER PROCESSING > Vol. XIX, N° 4 (12/2004) . - p. 408-418 Titre : Modelling of cyclic 3-dimensional heat transfer in injection moulding Type de document : texte imprimé Auteurs : A. Polynkin, Auteur ; J. F. T. Pittman, Auteur ; J. Sienz, Auteur Année de publication : 2004 Article en page(s) : p. 408-418 Note générale : Bibliogr. Langues : Anglais (eng) Index. décimale : 668.9 Polymères Résumé : A detailed 3-dimensional analysis of cyclic heat transfer in a complex injection moulding mould tool has been carried out, using a general-purpose commercial heat transfer code (FIDAP). A novel, generally applicable technique for modelling of heat loss to ambient from the tool parting surfaces is introduced, to facilitate inclusion of the mould-open period in the modelling. Simulations are continued through 30 cycles of moulding, to attainment of steady periodic conditions. During this period temperatures at the polymer-steel interface rose by between 10°C and 40°C above the coolant temperature. At the start of cooling, values of cavity surface heat transfer coefficients referred to the coolant temperature ranged from approximately 4000 W/m2K to 400 W/m2K, with the highest values occurring directly below the cooling channels and the lowest near a heated sprue bush. At the end of the cooling period, values at each location had dropped by approximately an order of magnitude. These results illustrate the limitations of plastics cooling analyses that use constant values of temperature or heat transfer coefficients as boundary conditions on the cavity surface. Comparison with results obtained omitting the modelling of the mould-open period shows how, in the latter case, higher tool temperatures are attained in the steady periodic conditions, and a larger number of cycles are required to reach steady periodic conditions. DOI : 10.3139/217.1850 En ligne : https://drive.google.com/file/d/1n4UwcIUjZZod03VKA1Ux6o9qkx3-arVr/view?usp=drive [...] Format de la ressource électronique : Pdf Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=3275 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
001030	-	Périodique	Bibliothèque principale	Documentaires	Disponible

---

1 (1 - 3 / 3)