Accueil
Détail de l'auteur
Auteur Biman Ghosh |
Documents disponibles écrits par cet auteur
Ajouter le résultat dans votre panier Affiner la recherche
A novel approach to correlate permeability and porosity in latex coatings / Biman Ghosh in PAINTINDIA, Vol. LII, N° 12 (12/2002)
[article]
Titre : A novel approach to correlate permeability and porosity in latex coatings Type de document : texte imprimé Auteurs : Biman Ghosh, Auteur ; Tanmay Chattopadhyay, Auteur Année de publication : 2002 Article en page(s) : p. 41-49 Note générale : Bibliogr. Langues : Anglais (eng) Index. décimale : 667.9 Revêtements et enduits Résumé : Two significant factors affecting the performance of architectural water based paints are durability and appearance. Permeability and porosity are the responsible factors in the determination of durability and appearance of the coating. The role of PVC is singularly most important aspect in the determination of permeability and porosity. Problems with latex coatings are due to their high permeability which leads to defects such as efflorescence, which is the leaching out of the soluble salts from the substrate through the paint film, that affect gloss and produce patches on the paint film. A series of experiments were conducted to establish conclusively the effect of Pigment Volume Concentration (PVC) on porosity and on permeability to determine the product performance. Authors of the present paper have investigated the effect of film thickness on porosity and have established the correlation between porosity and permeability at various PVCs. The authors have also established that porosity do not vary with film thickness and porosity linearly increases with PVC showing a point of inflexion at the Critical Pigment Volume Concentration (CP VC). Actually, porosity at the paint surface does not change with film thickness, but increases with PVC as more porous pigment volume replaces less porous binder volume. However, permeability was found to increase with PVC till CPVC, after which it decreased. This is because the incorporation of hydrophilic pigment increases the fraction of film allowing water vapour transport, but above CPVC permeability decreases due to the barrier effect from the pigment. The plot of permeability with porosity was similar to the plot of permeability with PVC. Note de contenu : - Principal model of permeation
- Water vapour permeability in pigmented film
- Experimental
- Determination of porosity of films
- Determination of permeability of paint film
- Porosity of paint at different wet film thickness (WFT)
- Permeability of paint having different PVC
Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=12389
in PAINTINDIA > Vol. LII, N° 12 (12/2002) . - p. 41-49[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 001288 - Périodique Bibliothèque principale Documentaires Disponible Water-borne polyurethane dispersions / Biman Ghosh in PAINTINDIA, Vol. LVI, N° 4 (04/2006)
[article]
Titre : Water-borne polyurethane dispersions Type de document : texte imprimé Auteurs : Biman Ghosh, Auteur Année de publication : 2006 Article en page(s) : p. 67-76 Note générale : Bibliogr. Langues : Anglais (eng) Index. décimale : 667.9 Revêtements et enduits Résumé : The importance of aqueous polurethane dispersions to the coating industry has grown steadily since their introduction into the market place. The development of PUD based coating systems has been simulated by environmental conditions. Because of their diverse nature of application, they have become an important class of organic material with a significant percentage of total market volume.
Recent developments in technology has enabled us to synthesize PUD with good chemical and mechanical properties, overcoming the early difficulties. Also, the proper selection of polyol and polyisocyanate is very important and actually it plays the key role in the final product performance.
Nowadays, acrylic modification of PUD either by blending or hybridization, is getting considerable attention in many application areas.Note de contenu : - Technology : Cationic - Non-ionic - Anionic
- Process : Solution Process - Prepolymer mixing process - Ketimine/Ketazime Process - Hot melt process
- Polyol & Polyisocyanate : Polyisocyanate - Polyol
- Acrylic modification of polyurethane
- Post curing of PUD: Carbodiimides - Siloxane crosslinkingPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=11600
in PAINTINDIA > Vol. LVI, N° 4 (04/2006) . - p. 67-76[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 005121 - Périodique Bibliothèque principale Documentaires Disponible