Accueil
KUNSTSTOFFE INTERNATIONAL . Vol. 103, N° 4Mention de date : 04/2013Paru le : 05/05/2013 |
Dépouillements
Ajouter le résultat dans votre panierColors reflect our times / Silke Laubach in KUNSTSTOFFE INTERNATIONAL, Vol. 103, N° 4 (04/2013)
[article]
Titre : Colors reflect our times Type de document : texte imprimé Auteurs : Silke Laubach, Auteur ; Maurizio Torchio, Auteur Année de publication : 2013 Article en page(s) : p. 11-14 Langues : Anglais (eng) Catégories : Couleur
vision des couleursIndex. décimale : 668.4 Plastiques, vinyles Résumé : Color studies - This year will be characterized by even more colors that convey a sense of movement, development, evolution, and surprise – ensured by bright, vibrant color tones, bizarre shades and special effects. Also irritation and contrast are important elements. In addition to bright effects soft, muted, earthy and organic tones will convey personal responsibility, stability and introspection. According to a study of color in consumer goods these two contrasting developments reflect our times. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=18651
in KUNSTSTOFFE INTERNATIONAL > Vol. 103, N° 4 (04/2013) . - p. 11-14[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 14940 - Périodique Bibliothèque principale Documentaires Disponible Color-stable at high temperatures / Dirk Schöning in KUNSTSTOFFE INTERNATIONAL, Vol. 103, N° 4 (04/2013)
[article]
Titre : Color-stable at high temperatures Type de document : texte imprimé Auteurs : Dirk Schöning, Auteur ; Inno Gaul, Auteur Année de publication : 2013 Article en page(s) : p. 16-18 Langues : Anglais (eng) Catégories : Carbonamide
Matières plastiques -- Coloration
Pigments
PolyamidesUn polyamide est un polymère contenant des fonctions amides -C(=O)-NH- résultant d'une réaction de polycondensation entre les fonctions acide carboxylique et amine.
Selon la composition de leur chaîne squelettique, les polyamides sont classés en aliphatiques, semi-aromatiques et aromatiques. Selon le type d'unités répétitives, les polyamides peuvent être des homopolymères ou des copolymères.
Stabilité thermiqueIndex. décimale : 668.4 Plastiques, vinyles Résumé : Polyamides - A heat-stable color system can only be achieved with a certain number of colorants. This is because many colorants reach their thermal stability limits at the high processing temperatures encountered. Note de contenu : - The right colorant
- Color stability is important
- New carrier systemPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=18657
in KUNSTSTOFFE INTERNATIONAL > Vol. 103, N° 4 (04/2013) . - p. 16-18[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 14940 - Périodique Bibliothèque principale Documentaires Disponible Automatic corrections and calculations / Julia Botos in KUNSTSTOFFE INTERNATIONAL, Vol. 103, N° 4 (04/2013)
[article]
Titre : Automatic corrections and calculations Type de document : texte imprimé Auteurs : Julia Botos, Auteur ; Thomas Hochrein, Auteur ; Karsten Kretschmer, Auteur ; Peter Heidemeyer, Auteur ; Bernhard Ulmer, Auteur ; Martin Bastian, Auteur Année de publication : 2013 Article en page(s) : p. 20-22 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Colorimétrie
Matières plastiques -- ColorationIndex. décimale : 668.4 Plastiques, vinyles Résumé : Inline process color measurements allow color formulations to be precisely adjusted. Color deviations due to for example batch to batch variations can not only be recognized early, but also directly corrected. This technique also enables accelerated color matching against samples or standards. Note de contenu : - Measuring the color of polymers
- Automatically calculating color correctionsPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=18658
in KUNSTSTOFFE INTERNATIONAL > Vol. 103, N° 4 (04/2013) . - p. 20-22[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 14940 - Périodique Bibliothèque principale Documentaires Disponible Injection molding for the compost / Clemens Doriat in KUNSTSTOFFE INTERNATIONAL, Vol. 103, N° 4 (04/2013)
[article]
Titre : Injection molding for the compost Type de document : texte imprimé Auteurs : Clemens Doriat, Editeur scientifique Année de publication : 2013 Article en page(s) : p. 24-28 Langues : Anglais (eng) Catégories : Biomatériaux
Bioplastiques
Composites à fibres végétales
Composites à fibres végétales -- Biodégradation
Matières plastiques -- BiodégradationIndex. décimale : 668.4 Plastiques, vinyles Résumé : Natural-fiber-reinforced biomaterials - Almost unnoticed by the public, a manufacturer of elastomer injection molding machines two years ago founded a subsidiary aimed at biodegradable materials. The development of natural fiber-reinforced biomaterials is now gaining speed, and their adaptation to injection molding is opening the door to a world of "green" applications. Note de contenu : - An unusual liaison
- Ridiculous cycle times
- A material that composts itself
- How do you reduce the material price ?
- Cars later, packaging now
- Clear fronts
- Anyone who doesn't start nowPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=18659
in KUNSTSTOFFE INTERNATIONAL > Vol. 103, N° 4 (04/2013) . - p. 24-28[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 14940 - Périodique Bibliothèque principale Documentaires Disponible Holistic process thinking is a winner / Uwe Becker in KUNSTSTOFFE INTERNATIONAL, Vol. 103, N° 4 (04/2013)
[article]
Titre : Holistic process thinking is a winner Type de document : texte imprimé Auteurs : Uwe Becker, Auteur Année de publication : 2013 Article en page(s) : p. 30-32 Langues : Anglais (eng) Catégories : Matières plastiques -- Moulage par injection
Matières plastiques -- Moulage par injection -- Appareils et matériel
Médecine -- Appareils et matériel
Polymères en médecine
Technologie médicaleIndex. décimale : 668.4 Plastiques, vinyles Résumé : Multi-component part for medical engineering - All the plastic parts needed by a medical product manufacturer for a high-quality injection pen are made by a single plastics processor. As this pen is employed in human medicine, both functional and optical demands are very high. For this reason, the processor has devised a zero-defects strategy that extends all the way from process design through to series production. Note de contenu : - Several functions in one product
- Fully developed mold concept safeguards annual production
- One data record for the entire production unit
- Unified concept must involve logistics
- Hundreds of millions of permutationsPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=18660
in KUNSTSTOFFE INTERNATIONAL > Vol. 103, N° 4 (04/2013) . - p. 30-32[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 14940 - Périodique Bibliothèque principale Documentaires Disponible Melt filtration on the injection molding machine / Reinhard Bauer in KUNSTSTOFFE INTERNATIONAL, Vol. 103, N° 4 (04/2013)
[article]
Titre : Melt filtration on the injection molding machine Type de document : texte imprimé Auteurs : Reinhard Bauer, Auteur Année de publication : 2013 Article en page(s) : p. 34-35 Langues : Anglais (eng) Catégories : Extrudeuse monovis
Filtration
Matières plastiques -- Moulage par injection
Matières plastiques -- Moulage par injection -- Appareils et matériel
Matières plastiques -- Recyclage
PlastificationIndex. décimale : 668.4 Plastiques, vinyles Résumé : Integrated Material Recycling - Increasing raw materials and energy prices are resulting in a boom in recycling. This is the starting point for the development activities of a South German machinery manufacturer. Highly economical in terms of labor and energy, the system features a single-screw extruder, which is integrated into the injection unit and has a connected high-performance melt filter, for reclaiming flake or regrind and processing it directly on the injection molding machine with no intermediate steps. Note de contenu : - Plastication by the extruder, purification by the melt filter, and injection by the plunger
- Injection molding machine can handle highly contaminated recyclate
- "Direct recycling" saves energy without stressing the materialPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=18661
in KUNSTSTOFFE INTERNATIONAL > Vol. 103, N° 4 (04/2013) . - p. 34-35[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 14940 - Périodique Bibliothèque principale Documentaires Disponible Plastics cycle / Franziska Gründel in KUNSTSTOFFE INTERNATIONAL, Vol. 103, N° 4 (04/2013)
[article]
Titre : Plastics cycle Type de document : texte imprimé Auteurs : Franziska Gründel, Editeur scientifique Année de publication : 2013 Article en page(s) : p. 36-38 Langues : Anglais (eng) Catégories : Matières plastiques -- Recyclage Index. décimale : 668.4 Plastiques, vinyles Résumé : Expert meeting - As part of the Blue Competence initiative of VDMA, a panel of experts discussed issues of recycling in Frankfurt am Main, Germany. The main focus was on mechanical recycling as well as social aspects. This article is based on the contributions made by the participants, who are members of the VDMA working group on recycling. Gerhard Gotzmann, Kunststoffe chief editor, moderated the talks. Note de contenu : - Political and social incentives
- Focus on product development
- A challenge for private service providers
- Extended producers' responsibility
- Recycling is an environmentalPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=18662
in KUNSTSTOFFE INTERNATIONAL > Vol. 103, N° 4 (04/2013) . - p. 36-38[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 14940 - Périodique Bibliothèque principale Documentaires Disponible
[article]
Titre : Refining recyclate Type de document : texte imprimé Auteurs : Thomas Hofstätter, Auteur Année de publication : 2013 Article en page(s) : p. 40-43 Langues : Anglais (eng) Catégories : Additifs
Airbag
Caoutchouc
Carbonate de calciumLe carbonate de calcium (CaCO3) est composé d'un ion carbonate (CO32-) et d'un ion calcium (Ca2+), sa masse molaire est de 100,1 g/mole.
C'est le composant principal du calcaire et de la craie, mais également du marbre. C'est aussi le principal constituant des coquilles d'animaux marins, du corail et des escargots.
Fibres de verre
Films plastiques
Matières plastiques -- Recyclage
Matières plastiques -- Recyclage -- Appareils et matériel
Polyamide 66
Polyéthylène basse densité linéaire
Polypropylène
TalcIndex. décimale : 668.4 Plastiques, vinyles Résumé : Upcycling - When recycling plastics ranging from production to post-consumer waste from collection systems, the process always has to cope with quality fluctuations in terms of the feed material. The combination of proven recycling and compounding technology now enables the production of better specified recyclate for varied and demanding applications. Note de contenu : - How it works
- Highly filled PP/talc recyclates
- Washed silage film and CaCO3
- Airbags and fibreglass
- Rubber flour as a sustainable filler additiveEn ligne : https://www.kunststoffe.de/en/journal/archive/article/upcycling-refining-recycla [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=18663
in KUNSTSTOFFE INTERNATIONAL > Vol. 103, N° 4 (04/2013) . - p. 40-43[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 14940 - Périodique Bibliothèque principale Documentaires Disponible Infeed granulator for thermoforming in KUNSTSTOFFE INTERNATIONAL, Vol. 103, N° 4 (04/2013)
[article]
Titre : Infeed granulator for thermoforming Type de document : texte imprimé Année de publication : 2013 Article en page(s) : p. 44 Langues : Anglais (eng) Catégories : Broyeurs
Granulation
Matières plastiques -- Recyclage
Matières plastiques -- Recyclage -- Appareils et matériel
Matières plastiques -- ThermoformageIndex. décimale : 668.4 Plastiques, vinyles Résumé : Granulation - With its infeed granulators of the latest RotoSchneider generation, a German supplier safeguards the automatic transition to efficient processing of residual materials in thermoforming processes. Thanks to intelligent speed control and adjusted infeed systems, the granulators can be integrated into existing production lines in a quick and easy way. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=18664
in KUNSTSTOFFE INTERNATIONAL > Vol. 103, N° 4 (04/2013) . - p. 44[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 14940 - Périodique Bibliothèque principale Documentaires Disponible Playing with WPC / Hannes Frech in KUNSTSTOFFE INTERNATIONAL, Vol. 103, N° 4 (04/2013)
[article]
Titre : Playing with WPC Type de document : texte imprimé Auteurs : Hannes Frech, Auteur ; Eva Sykacek, Auteur ; Norbert Mundigler, Auteur Année de publication : 2013 Article en page(s) : p. 45-48 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Bois
Composites à fibres -- Effet de l'humidité
Composites à fibres -- Moulage par injection
Composites à fibres végétales
Hygrométrie
Séchage
Thermoplastiques -- Moulage par injectionIndex. décimale : 668.4 Plastiques, vinyles Résumé : Predrying - The production of large-volume game pieces by injection molding poses great challenges to processors. Because of the large proportion of wood in the WPC pellet stock and long storage time, the water content may exceed 1 %, which makes predrying essential. Note de contenu : - Influence of water on thermoplastics
- Hygroscopicity of wood
- Challenges for WPC injection molding
- Optimizing the drying parameters
- The temperature distribution in the dry air dryerPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=18665
in KUNSTSTOFFE INTERNATIONAL > Vol. 103, N° 4 (04/2013) . - p. 45-48[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 14940 - Périodique Bibliothèque principale Documentaires Disponible Wear protection on twin screws / Hans-Peter Schneider in KUNSTSTOFFE INTERNATIONAL, Vol. 103, N° 4 (04/2013)
[article]
Titre : Wear protection on twin screws Type de document : texte imprimé Auteurs : Hans-Peter Schneider, Auteur ; Jens Liebhold, Auteur Année de publication : 2013 Article en page(s) : p. 50-53 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Alliages
Carbure de tungstène
Extrudeuse bi-vis
Matières plastiques -- Extrusion -- Appareils et matériels
Métaux -- Revêtements protecteurs
Molybdène
Revêtement métallique
Usure (mécanique)Index. décimale : 668.4 Plastiques, vinyles Résumé : Surface Coating - Wear is unavoidable and system-inherent in counter-rotating twin-screw extruders. Apart from the material being extruded, the process parameters and the geometry of the parts, the right choice of friction partners plays a dominant role with respect to the service life of the process unit. The use of special surface coatings allows the service lives to be significantly prolonged. Note de contenu : - Adhesive wear
- Abrasive wear
- Corrosive wear
- Characteristic wear in the various applications
- Factors that influence wear
- Wear analysis
- Measures for reducing wear
- Flight surface protection based on molybdenum alloy
- Flight surface protection based on tungsten carbideEn ligne : http://www.kraussmaffeiberstorff.com/media/files/kmdownloadlocal/en/I-PDF_Krauss [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=18666
in KUNSTSTOFFE INTERNATIONAL > Vol. 103, N° 4 (04/2013) . - p. 50-53[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 14940 - Périodique Bibliothèque principale Documentaires Disponible Flexible heads / Heinz Gross in KUNSTSTOFFE INTERNATIONAL, Vol. 103, N° 4 (04/2013)
[article]
Titre : Flexible heads Type de document : texte imprimé Auteurs : Heinz Gross, Auteur Année de publication : 2013 Article en page(s) : p. 54-56 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Matières plastiques -- Extrusion -- Appareils et matériels Tags : 'Filière extrusion' 'Technologie pendulaire' 'Têtes flexibles' Index. décimale : 668.4 Plastiques, vinyles Résumé : Tube and pipe dies - Fine adjustments of the die gap of round dies allow a wide variety of different wall thicknesses to be extruded without interrupting the production process. Note de contenu : - Tilting technology
- Axially adjustable diePermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=18667
in KUNSTSTOFFE INTERNATIONAL > Vol. 103, N° 4 (04/2013) . - p. 54-56[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 14940 - Périodique Bibliothèque principale Documentaires Disponible
Exemplaires (1)
Code-barres | Cote | Support | Localisation | Section | Disponibilité |
---|---|---|---|---|---|
14940 | - | Périodique | Bibliothèque principale | Documentaires | Disponible |