Scratch resistance of UV coatings : influence of chemistry / Stefan Smeets in PAINTINDIA, Vol. LIV, N° 4 (04/2004)

[article]  inPAINTINDIA > Vol. LIV, N° 4 (04/2004) . - p. 85-94 Titre : Scratch resistance of UV coatings : influence of chemistry Type de document : texte imprimé Auteurs : Stefan Smeets, Auteur ; Indrajit Bhattacharya, Auteur ; Tania Lermytte, Auteur Année de publication : 2004 Article en page(s) : p. 85-94 Note générale : Bibliogr. Langues : Anglais (eng) Index. décimale : 667.9 Revêtements et enduits Résumé : Organic coatings are very susceptible towards contact with hard objects, i.e. they are subject to maring and scratching. Scratched surfaces are not only less decorative and because of that have less value, but their protective effect is reduced too. Scractches are wek points where the system is open to attack. Corrosion can begin there, or if the substrate is deformed the coating will tear or even release from the substrate. Note de contenu : - Resins - Erichsen pen tester - Dilution of EB 600 with 50 % of different monomers - Influence of photoinitiator - Influence of EB P115 - Influence of concentration of different photoinitiators - UV-curing under nitrogen - Taber-Haze test Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=12009 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
000452	-	Périodique	Bibliothèque principale	Documentaires	Disponible

UV coating technology ideal for coating plastics / Elisabeth Muzeau in PAINTINDIA, Vol. LIV, N° 12 (12/2004)

[article]  inPAINTINDIA > Vol. LIV, N° 12 (12/2004) . - p. 36-41 Titre : UV coating technology ideal for coating plastics Type de document : texte imprimé Auteurs : Elisabeth Muzeau, Auteur ; Stefan Smeets, Auteur ; James Wu, Auteur Année de publication : 2004 Article en page(s) : p. 36-41 Langues : Anglais (eng) Index. décimale : 667.9 Revêtements et enduits Note de contenu : - ACHIEVING SUPERIOR UV COATINGS - COMPONENTS OF A UV FORMULATION - HOW DILUTING ACRYLATES AFFECT ADHESION ON PLASTICS - HOW OLIGOMERS AND ADDITIVES AFFECT ADHESION ON PLASTICS - WATERBORNE SOLUTIONS FOR ADHESION ON PLASTICS Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=11985 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
001803	-	Périodique	Bibliothèque principale	Documentaires	Disponible

UV coating technology ideal for plastics / Elisabeth Muzeau in PAINTINDIA, N° annuel 2005 (2005)

[article]  inPAINTINDIA > N° annuel 2005 (2005) . - p. 133-139 Titre : UV coating technology ideal for plastics Type de document : texte imprimé Auteurs : Elisabeth Muzeau, Auteur ; Stefan Smeets, Auteur ; James Wu, Auteur Année de publication : 2005 Article en page(s) : p. 133-139 Langues : Anglais (eng) Index. décimale : 667.9 Revêtements et enduits Résumé : Unprecedented growth rates in the global telecommunications, electronic and automotive industries have spurred the demand for a wide range of plastic substrates which re used intensively within these industries. With the increased demands on its usage and performance, there is also a greater need for high performance, highe efficiency and value-added coatings on these various plastic substrates. Note de contenu : - ACHIEVING SUPERIOR UV COATINGS - COMPONENTS OF A UV FORMULATION - HOW DILUTING ACRYLATES AFFECT ADHESION ON PLASTICS - HOW OLIGOMERS AND ADDITIVES AFFECT ADHESION ON PLASTICS - WATERBORNE SOLUTIONS FOR ADHESION ON PLASTICS Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=11977 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
002354	-	Périodique	Bibliothèque principale	Documentaires	Disponible

UV coatings for plastics / Stefan Smeets in EUROPEAN COATINGS JOURNAL (ECJ), N° 6/2004 (06/2004)  

[article]  inEUROPEAN COATINGS JOURNAL (ECJ) > N° 6/2004 (06/2004) . - p. 42-48 Titre : UV coatings for plastics Type de document : texte imprimé Auteurs : Stefan Smeets, Auteur ; Egbert Boerrigter, Auteur ; Stephan Peeters, Auteur Année de publication : 2004 Article en page(s) : p. 42-48 Langues : Anglais (eng) Index. décimale : 667.9 Revêtements et enduits Résumé : Rapid curring, no or very low VOC content, high performance properties - UV-technology offers a number of advantages. On plastics, through, UV curable coatings have been difficult to achieve, mainly because of inferior adhesion to the substrate compared to solvent borne systems. Optimisation of existing binder/reactive diluent systems, however, can provide coatings for plastics with very good performances. En ligne : https://drive.google.com/file/d/1eDl6TTYQb_zXVmTLDPa41K4yP-fO2zL2/view?usp=drive [...] Format de la ressource électronique : Pdf Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=9352 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
000674	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Water-based, filed-applied, UV-curable topcoats for wood flooring / J. Arceneaux in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 201, N° 4559 (04/2011)  

[article]  inPOLYMERS PAINT COLOUR JOURNAL - PPCJ > Vol. 201, N° 4559 (04/2011) . - p. 20-22 Titre : Water-based, filed-applied, UV-curable topcoats for wood flooring Type de document : texte imprimé Auteurs : J. Arceneaux, Auteur ; Guido Vanmeulder, Auteur ; Stefan Smeets, Auteur Année de publication : 2011 Article en page(s) : p. 20-22 Langues : Anglais (eng) Catégories : Bois -- Finition Parquets -- Revêtements protecteurs Polymères en émulsion Polyuréthanes Revêtements en phase aqueuse -- Séchage sous rayonnement ultraviolet:Peinture en phase aqueuse -- Séchage sous rayonnement ultraviolet Index. décimale : 667.9 Revêtements et enduits Résumé : UV curing provides many benefits, such as increased productivity and performance and reduced energy consumption and emissions. Initially these benefits could only be enjoyed in factory-applied applications due to the nature of the UV curing equipment required. During the past decade, however, significant developments in portable UV curing technology have made field-applied, UV-curable coatings possible. For the wood flooring industry, factory-applied coatings are typically UV-cured due to the advantages described above. while initially 100% solids formulations, UV-curable polyuréthane dispersions in water (UV-(PUD), introduced in the late 1990s, provide improved flexibility, adhesion and stain resistance and with lower viscosities and low-VOC content are attractive for spray, curtain and vacuum applications on to wood. Field-applied, wood floor coatings, until recently however, have required conventional curing, polyurethanes (PU) are the leading type of field-applied floor coatings. Others include conversion varnishes, oils and waxes. Today,j however, there are several UV-curable wood floor coatings in varying stages of commercial development, including 100% solids and waterborne formulations. Note de contenu : - ADAPTING TO FIELD CONDITIONS - ADVANTAGES OF WATER-BASED SYSTEMS :Waterborne vs 100% solids UV formulations - UV-PUDs vs conventional PUs - Confirmation through performance testing : Properties ov UV and conventional cured coatings - Focus on PV-PUDs : Properties over time - Focus on UV-PUDs : Single vs two coat systems - Focus on UV-PUDs : Effect of UV dose En ligne : https://drive.google.com/file/d/1jylVO1NTkE4WEl9oDVyYCs6jBSNKAxTp/view?usp=drive [...] Format de la ressource électronique : Pdf Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=11490 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
012998	-	Périodique	Bibliothèque principale	Documentaires	Disponible

---

1 (1 - 5 / 5)